Template

NYX Injection Molding Tryout Report Checklist

by Greg Homann, from the Community

Use this injection molding tryout report checklist to audit conformity to the NYX Mold Build Standard. Verify mold identification and safety plaques, hydraulic and water connections, hot runner setup, valve gates, locating ring, runner and gating design, and parting line vents. Assess process and mold performance including Moldflow validation, T1 protocol, TIS 3.1, cavity balance, parting line closure, class A surface quality, ejector, slides, lifters, and EOAT demolding. Record setup details and approve or flag readiness to ship to the NYX facility.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
NYX Inc. Injection Molding Tryout Report 20230309
Use this injection molding tryout report to audit conformity with the NYX Mold Build Standard. The checklist covers mold identification, plaques and labeling, hydraulics and water lines, hot runner components, guards and safety, and runner and gating requirements. It validates process and mold performance, including parting line quality, vents, ejector and slide function, cavity balance, wall thickness verification, gate trim, planned tonnage, and cycle time. It also prompts documentation of tryout details, setup sheets, and final approval to ship once all open issues are closed.
by Mark Snyder, from the Community
Downloads: 0
Get
Template
Injection Molding Tryout Report Checklist (NYX Standard)
Use this structured tryout report to audit conformity to the NYX Mold Build Standard for injection molded parts. The checklist covers mold identification plaques, hydraulic interlocks, water line diagrams, manifolds, hot runner setup, valve gates, and labeling. Validate tooling dimensions, venting, runner and gate quality, sprue details, and safety features. Assess process and part quality including Moldflow validation, cavity balance, flash, mismatch, sink, gloss, read-through, knitlines, wall thickness, ejection, slide and lifter motion, leaks, and demold with EOAT. Capture setup details and record approval status before shipping to the NYX facility.
by Greg Homann, from the Community
Downloads: 0
Get
Template
Injection Molding Tryout Report Checklist (NYX)
Use this injection molding tryout report to audit conformity to the NYX mold build standard. Document tool identification, setup, and process data; verify plaques, clamp plates, hydraulics, water circuits, valve gates, and venting. Capture Moldflow and protocol checks, cavity balance, part quality (flash, sink, gloss), ejection and slide performance, leaks, demolding, and gate trimming. Attach setup sheets and record approval to ship.
by Greg Homann, from the Community
Downloads: 10+
Get
Template
NYX Inc Injection Molding Tryout Report
Use this inspection checklist to audit conformity with the NYX mold build standard during injection molding tryouts. Sections cover tooling identification, plaques and safety requirements, hydraulics and water lines, hot runner setup, vents and gates, clamp and ejector details, and runner systems. Process and mold performance checks include cavity balance, flash and mismatch, class A surface quality, knitline verification, wall thickness, ejector and slide motion, leak checks, demolding, and clean gate trim. Record setup parameters with photos where required and use the approval section to confirm shipment readiness or flag open issues.
by Greg Homann, from the Community
Downloads: 0
Get

NYX Inc. Injection Molding Tryout Report 20230309

Use this injection molding tryout report to audit conformity with the NYX Mold Build Standard. The checklist covers mold identification, plaques and labeling, hydraulics and water lines, hot runner components, guards and safety, and runner and gating requirements. It validates process and mold performance, including parting line quality, vents, ejector and slide function, cavity balance, wall thickness verification, gate trim, planned tonnage, and cycle time. It also prompts documentation of tryout details, setup sheets, and final approval to ship once all open issues are closed.

by Mark Snyder, from the Community

Get

Template

Injection Molding Tryout Report Checklist (NYX Standard)

Use this structured tryout report to audit conformity to the NYX Mold Build Standard for injection molded parts. The checklist covers mold identification plaques, hydraulic interlocks, water line diagrams, manifolds, hot runner setup, valve gates, and labeling. Validate tooling dimensions, venting, runner and gate quality, sprue details, and safety features. Assess process and part quality including Moldflow validation, cavity balance, flash, mismatch, sink, gloss, read-through, knitlines, wall thickness, ejection, slide and lifter motion, leaks, and demold with EOAT. Capture setup details and record approval status before shipping to the NYX facility.

by Greg Homann, from the Community

Get

Template

Injection Molding Tryout Report Checklist (NYX)

Use this injection molding tryout report to audit conformity to the NYX mold build standard. Document tool identification, setup, and process data; verify plaques, clamp plates, hydraulics, water circuits, valve gates, and venting. Capture Moldflow and protocol checks, cavity balance, part quality (flash, sink, gloss), ejection and slide performance, leaks, demolding, and gate trimming. Attach setup sheets and record approval to ship.

by Greg Homann, from the Community

10+

Get

Template

NYX Inc Injection Molding Tryout Report

Use this inspection checklist to audit conformity with the NYX mold build standard during injection molding tryouts. Sections cover tooling identification, plaques and safety requirements, hydraulics and water lines, hot runner setup, vents and gates, clamp and ejector details, and runner systems. Process and mold performance checks include cavity balance, flash and mismatch, class A surface quality, knitline verification, wall thickness, ejector and slide motion, leak checks, demolding, and clean gate trim. Record setup parameters with photos where required and use the approval section to confirm shipment readiness or flag open issues.

by Greg Homann, from the Community

Get

NYX Injection Molding Tryout Report Checklist

About author

You might also like

NYX Inc. Injection Molding Tryout Report 20230309

Injection Molding Tryout Report Checklist (NYX Standard)

Injection Molding Tryout Report Checklist (NYX)

NYX Inc Injection Molding Tryout Report

You might also like

NYX Inc. Injection Molding Tryout Report 20230309

Injection Molding Tryout Report Checklist (NYX Standard)

Injection Molding Tryout Report Checklist (NYX)

NYX Inc Injection Molding Tryout Report