Template

Receiving and Cage Inspection Checklist

by SAFE Andover, from the Community

This monthly paddlesport equipment checklist helps activity teams inspect helmets, throwlines, canoes, and sit-on-top kayaks for damage and readiness. Verify helmet shells, stitching, and buckles; confirm throwline ropes extend fully without knots or fraying; account for all boats and check hulls, fixtures, and painters on canoes; and confirm kayaks are present and free of cracks or holes, excluding drainage ports. Use it to standardize routine checks and maintain safe, reliable gear for sessions.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions .

Template
Activity Boats Pre-Use Safety Checklist
Use this pre-use safety checklist to prepare, operate and close activity boats at a leisure lake. It guides staff through opening checks such as signing in, collecting keys and a radio, reviewing weather and wind limits, completing a lake walk, and setting up buoyancy aids, paddles, first aid kit and the staff rescue boat. Perform detailed inspections for swan boats, kayaks and canoes including cleanliness, damage, pedals and steering, bungs and bodywork. Verify the jetty and launch area are safe, water level is acceptable, and wildlife hazards are noted. Confirm adequate PPE and a stocked first aid kit. Finish with closing checks to clean, secure and store all craft and equipment, lock facilities, return keys and radio, and sign out.
by SAFE Andover, from the Community
Downloads: 0
Get
Template
PPE Gear Check Template
This PPE gear check template helps teams complete thorough pre work inspections of personal protective equipment used on construction and rail jobs. Capture brand, serial number, and manufacture or expiry dates for harnesses and lanyards. Check stitching, webbing, and metal components for wear, corrosion, tears, or fraying, and attach clear photos of tags and any damage. Inspect scaff hooks and mallions, Ladsafe devices, helmets, and power drills for cracks, dents, correct operation, and overall condition. Confirm rail vests and safety glasses are present and serviceable, escalate replacements to management when required, and record signatures from two people on completion. Use this checklist to document compliance, identify defects, assign corrective actions, and keep workers safe.
by Glen Newland, from the Community
Downloads: 20+
Get
Template
Annual Harness Inspection Checklist
This annual harness inspection checklist helps teams evaluate personal fall protection equipment for safe use. Record brand, model, serial, size, ownership, and in-service date, then verify that labels are present and legible. Inspect webbing and straps for cuts, burns, holes, chemical or UV damage, and confirm all stitching is intact. Check adjustment buckles, leg and waist buckles, and D-rings for damage, corrosion, or pitting. Attach photos, add notes, and sign off to document compliance.
by Chris Wille, from the Community
Downloads: 0
Get
Template
Harness and Lanyard Check Sheet
Use this harness and lanyard inspection check sheet to assess fall protection equipment before use. Capture equipment details and serial or barcode, then verify the presence and legibility of ID tags, check webbing for cuts, abrasion, burns, chemical damage, and loose or broken stitching, inspect D-rings for wear, cracks, sharp edges, and free pivoting, confirm buckles, grommets, and rivets are secure and undamaged, and review lanyards and wire rope for fraying or unusual wear. Record reasons for any failures, flag equipment as out of service, and complete inspector and manager sign-off to maintain compliance and worker safety during work at height.
by Dave Condell, from the Community
Downloads: 0
Get

Activity Boats Pre-Use Safety Checklist

Use this pre-use safety checklist to prepare, operate and close activity boats at a leisure lake. It guides staff through opening checks such as signing in, collecting keys and a radio, reviewing weather and wind limits, completing a lake walk, and setting up buoyancy aids, paddles, first aid kit and the staff rescue boat. Perform detailed inspections for swan boats, kayaks and canoes including cleanliness, damage, pedals and steering, bungs and bodywork. Verify the jetty and launch area are safe, water level is acceptable, and wildlife hazards are noted. Confirm adequate PPE and a stocked first aid kit. Finish with closing checks to clean, secure and store all craft and equipment, lock facilities, return keys and radio, and sign out.

by SAFE Andover, from the Community

Get

Template

PPE Gear Check Template

This PPE gear check template helps teams complete thorough pre work inspections of personal protective equipment used on construction and rail jobs. Capture brand, serial number, and manufacture or expiry dates for harnesses and lanyards. Check stitching, webbing, and metal components for wear, corrosion, tears, or fraying, and attach clear photos of tags and any damage. Inspect scaff hooks and mallions, Ladsafe devices, helmets, and power drills for cracks, dents, correct operation, and overall condition. Confirm rail vests and safety glasses are present and serviceable, escalate replacements to management when required, and record signatures from two people on completion. Use this checklist to document compliance, identify defects, assign corrective actions, and keep workers safe.

by Glen Newland, from the Community

20+

Get

Template

Annual Harness Inspection Checklist

This annual harness inspection checklist helps teams evaluate personal fall protection equipment for safe use. Record brand, model, serial, size, ownership, and in-service date, then verify that labels are present and legible. Inspect webbing and straps for cuts, burns, holes, chemical or UV damage, and confirm all stitching is intact. Check adjustment buckles, leg and waist buckles, and D-rings for damage, corrosion, or pitting. Attach photos, add notes, and sign off to document compliance.

by Chris Wille, from the Community

Get

Template

Harness and Lanyard Check Sheet

Use this harness and lanyard inspection check sheet to assess fall protection equipment before use. Capture equipment details and serial or barcode, then verify the presence and legibility of ID tags, check webbing for cuts, abrasion, burns, chemical damage, and loose or broken stitching, inspect D-rings for wear, cracks, sharp edges, and free pivoting, confirm buckles, grommets, and rivets are secure and undamaged, and review lanyards and wire rope for fraying or unusual wear. Record reasons for any failures, flag equipment as out of service, and complete inspector and manager sign-off to maintain compliance and worker safety during work at height.

by Dave Condell, from the Community

Get

Receiving and Cage Inspection Checklist

About author

You might also like

Activity Boats Pre-Use Safety Checklist

PPE Gear Check Template

Annual Harness Inspection Checklist

Harness and Lanyard Check Sheet

You might also like

Activity Boats Pre-Use Safety Checklist

PPE Gear Check Template

Annual Harness Inspection Checklist

Harness and Lanyard Check Sheet