Template

Payzone Completions Grease Unit Checklist

by Manuel Escalera, from the Community

10+

Use this grease unit inspection checklist for oil and gas completions work. Verify fuel and oil levels, belt condition, regulators, pressure cutoffs, relief valves, drum levels, and skid integrity. Record customer, lease, job, asset and location details, attach photos of the skid, and confirm completion with a digital sign-off. Standardize inspections to improve safety, maintenance planning, and compliance.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Payzone Completions Test Pump Checklist
Use this inspection checklist to prepare and verify a Payzone completions test pump prior to operation. Check tank security and levels, hose condition, valves and fittings, wellhead connection, pressure gauges and chart recorder, belts and fluids, trailer condition, lights, and safety grounding. Record certification dates, spare parts, batteries, charts, and sign off before use.
by Manuel Escalera, from the Community
Downloads: 10+
Get
Template
Skid Steer Pre-Op Inspection Checklist
Conduct a thorough pre-operation check of skid steers with this easy-to-use checklist. Inspect engine oil, hydraulic and coolant levels, fuel, and tires. Test backup alarm, travel and lift controls, instrumentation, lights, and wiper. Record hour meter, location, and findings, and note any damage. Assess the work area for overhead obstructions and traffic hazards. Help operators verify training, improve safety compliance, and prevent costly breakdowns before starting work.
by Keith Falardeau, from the Community
Downloads: 0
Get
Template
Flow Back Tank or Pit Inspection Checklist
This oil and gas completions checklist helps crews inspect flow back tanks or pits for safe operation and compliance. Record job details and asset numbers, then verify key items including valves and plugs, flange bolts, hatch seals and bolts, ladders and handrails, and proper operation of all valves. Confirm piping certification and document certification dates. Check grounding rods and cables, wind sock placement, and overall equipment condition. Designed for field use by Payzone personnel, this template streamlines inspections, supports safety and environmental controls, and standardizes documentation across flowback operations.
by Manuel Escalera, from the Community
Downloads: 20+
Get
Template
Esperance FEL and Skid Steer Prestart Checklist
This FEL and skid steer prestart checklist helps operators verify daily readiness and safety before use. Confirm risk assessment and record machine hours. Inspect for leaks under the machine and ensure locking pins are engaged on skid steers. Check oil and water levels, grease all pivot points, and test all lights. Clean the air conditioner filter, blow out the radiator, and remove grain residue from the machine and fire extinguisher. Ensure the grease gun and lifting chains are on the FEL and that the machine was fueled at shift end. Wear the seat belt, maintain machine hygiene, and document any damage with photos.
by Shane Massam, from the Community
Downloads: 20+
Get

Payzone Completions Test Pump Checklist

Use this inspection checklist to prepare and verify a Payzone completions test pump prior to operation. Check tank security and levels, hose condition, valves and fittings, wellhead connection, pressure gauges and chart recorder, belts and fluids, trailer condition, lights, and safety grounding. Record certification dates, spare parts, batteries, charts, and sign off before use.

by Manuel Escalera, from the Community

10+

Get

Template

Skid Steer Pre-Op Inspection Checklist

Conduct a thorough pre-operation check of skid steers with this easy-to-use checklist. Inspect engine oil, hydraulic and coolant levels, fuel, and tires. Test backup alarm, travel and lift controls, instrumentation, lights, and wiper. Record hour meter, location, and findings, and note any damage. Assess the work area for overhead obstructions and traffic hazards. Help operators verify training, improve safety compliance, and prevent costly breakdowns before starting work.

by Keith Falardeau, from the Community

Get

Template

Flow Back Tank or Pit Inspection Checklist

This oil and gas completions checklist helps crews inspect flow back tanks or pits for safe operation and compliance. Record job details and asset numbers, then verify key items including valves and plugs, flange bolts, hatch seals and bolts, ladders and handrails, and proper operation of all valves. Confirm piping certification and document certification dates. Check grounding rods and cables, wind sock placement, and overall equipment condition. Designed for field use by Payzone personnel, this template streamlines inspections, supports safety and environmental controls, and standardizes documentation across flowback operations.

by Manuel Escalera, from the Community

20+

Get

Template

Esperance FEL and Skid Steer Prestart Checklist

This FEL and skid steer prestart checklist helps operators verify daily readiness and safety before use. Confirm risk assessment and record machine hours. Inspect for leaks under the machine and ensure locking pins are engaged on skid steers. Check oil and water levels, grease all pivot points, and test all lights. Clean the air conditioner filter, blow out the radiator, and remove grain residue from the machine and fire extinguisher. Ensure the grease gun and lifting chains are on the FEL and that the machine was fueled at shift end. Wear the seat belt, maintain machine hygiene, and document any damage with photos.

by Shane Massam, from the Community

20+

Get

Payzone Completions Grease Unit Checklist

About author

You might also like

Payzone Completions Test Pump Checklist

Skid Steer Pre-Op Inspection Checklist

Flow Back Tank or Pit Inspection Checklist

Esperance FEL and Skid Steer Prestart Checklist

You might also like

Payzone Completions Test Pump Checklist

Skid Steer Pre-Op Inspection Checklist

Flow Back Tank or Pit Inspection Checklist

Esperance FEL and Skid Steer Prestart Checklist