Template

Lease Production Safety Checklist

by Enablement Team, from the Community

Use this comprehensive lease production safety checklist to standardize oil and gas site inspections. Verify alarms and shutdowns, electrical integrity, required signage, guarding of moving parts, and fire protection. Assess gas detection instruments, respiratory equipment, ladders, and housekeeping. Inspect tanks, vessels, piping, relief valves, and foundations for condition and compliance. Check H2S (RRC 36) readiness, roadway hazards, and proper labeling. Confirm training records, first aid kits, and availability of the company HSE manual. Capture environmental remarks and finalize with inspector sign-off.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
SPC Lease Inspection Checklist
This SPC lease inspection checklist helps EHS teams evaluate oil and gas well sites and tank battery locations for safety, compliance, and environmental performance. It covers site identification and signage, containment and housekeeping, electrical systems and guarding, tank battery integrity, H2S warnings and wind socks, access and fall protection on ladders and catwalks, thief hatch condition, and dike and foundation status. Sections also assess pressure vessels, relief valves, heaters, separators, dehydration units, compressors, and chemical storage, including secondary containment and SDS availability. Capture comments, photos, and signatures to document findings and corrective actions.
by Noah Wright, from the Community
Downloads: 10+
Get
Template
Monthly Health and Safety Audit Checklist
Conduct a comprehensive monthly health and safety audit across offices, workshops, and site areas. This checklist covers pre-audit checks, lighting, emergency lighting, fire exits and alarms, first aid and HSE postings, PPE suitability and training, manual handling practices and aids, staff training and supervision, general workshop safety, compressed air and gas cylinder handling, chemicals management with COSHH and SDS, fire and emergency evacuation readiness, racking and storage, ladders and access equipment, tool condition and use, machinery guarding and isolation, and lifting equipment inspections. Use it to identify hazards, verify compliance, and assign corrective actions with documented confirmation.
by Claudia Garcia, from the Community
Downloads: 0
Get
Template
Weekly/Monthly Site Safety Inspection Checklist
This weekly or monthly site safety inspection checklist helps construction teams perform comprehensive audits across critical safety areas. Verify site documentation, inductions, RAMS, and training. Check first aid kits and eyewash, fire prevention measures, alarms and hot works permits. Review site security, signage, and perimeter controls. Assess PPE compliance, housekeeping, storage, waste, and road cleanliness. Inspect trip and fall controls, excavations, ladders, and work at height. Evaluate manual handling, hand and power tools, mobile plant, machinery certification, and operator competency. Confirm electrical safety, COSHH and fuel storage, spill kits, and chemical registers. Include confined space permits, gas monitoring, emergency plans, and environmental controls for waste, dust, noise, and runoff. Conclude with photos and sign-off by the inspector and site supervisor.
by Ray Carr, from the Community
Downloads: 20+
Get
Template
HSE Workplace Safety Inspection Checklist
This HSE workplace safety inspection checklist helps teams assess safety across production, distribution, workshops, offices, and site grounds. It covers health and safety systems, housekeeping, electrical safety and test-and-tag, machinery operation and guarding, stairs and landings, manual handling and aids, material storage and racking, amenities, first aid and emergency equipment, lighting, fire control and wardens, permit to work, lockout tagout and E-stops, mobile plant pre-starts and licensing, public protection and traffic control, site signage, hazardous substances and SDS management, and restricted areas and confined spaces. Use it to standardize inspections, identify hazards, and implement controls to reduce risk and improve compliance.
by Mark Bilson, from the Community
Downloads: 10+
Get

Lease Production Safety Checklist

About author

You might also like

SPC Lease Inspection Checklist

Monthly Health and Safety Audit Checklist

Weekly/Monthly Site Safety Inspection Checklist

HSE Workplace Safety Inspection Checklist

You might also like

SPC Lease Inspection Checklist

Monthly Health and Safety Audit Checklist

Weekly/Monthly Site Safety Inspection Checklist

HSE Workplace Safety Inspection Checklist