Template

Fluoride and PAC Dosing Stations Maintenance Report

by Bailey Duncan, from the Community

This electrical maintenance report template is designed for fluoride and polyaluminium chloride (PAC) dosing stations at water treatment facilities such as Mt Kynoch. It guides technicians to test pump windings, insulation resistance, running loads, and phase voltages; inspect fuses, power leads, RCDs, and labeling; verify SCADA alarms, backup batteries, and communications; check flow and solenoid switches; and document completed work plus plan follow-up actions.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Technical Quarterly PAC Injector Cleaning
Use this quarterly checklist to clean and service PAC (polyaluminium chloride) injectors used in swimming pool water treatment. Verify site details, isolate and flush lines, inspect and clean dosing pumps and injector nozzles, replace worn seals and tubing, calibrate feed rates, and record test results. Covers comp, leisure, spa, and lido pools. Supports consistent dosing, clear water, and compliance with facility procedures and safety controls.
by Jodie Coupland, from the Community
Downloads: 0
Get
Template
Trility Murray Bridge Water Treatment Inspection
This civil, structural, and materials inspection checklist is designed for the Trility Murray Bridge water treatment facility. It guides assessments across site access, fencing, grounds, and roads; safety showers and eyewash stations; PAC, alum, lime, caustic, chlorine, fluoride, and coagulant aid dosing; PAC contact tanks; flocculation and rapid mix units; sedimentation clarifiers and sludge suction components; filter tanks and backwash systems; UV disinfection kiosks, lamp wipers, channels, and cleaning systems; filtered water storage and pump stations; buildings including control rooms and chlorine rooms; and sludge lagoons. It also includes concrete cover surveys, carbonation depth, and chloride testing for external and internal walls, floors, and pipework, plus safe access checks, davits, valves, and general condition ratings.
by Engineering Solutions, from the Community
Downloads: 0
Get
Template
WPS Electrical Maintenance Report
This WPS Electrical Maintenance Report template supports water and wastewater sites with comprehensive electrical checks. Record site details and notify the control room before starting. Capture pump data including run hours, winding continuity, insulation resistance, test running load, and phase checks at no load and load conditions. Inspect sump pumps, floats, and PLC communications. Verify switchboard labeling, lighting, fuses, RCDs, SCADA alarm faults, backup battery condition, station comms, and tighten connections before cleaning cabinets. If present, check shaft encoder communications and connections. Document completed work, plan future tasks, and sign off to maintain compliance and operational reliability.
by Bailey Duncan, from the Community
Downloads: 0
Get
Template
ECI Site Inspection for TRILITY Loxton WTP
Use this Electrical, Control and Instrumentation site inspection checklist for the TRILITY Loxton Water Treatment Plant. Record equipment details and assess condition and criticality using TRILITY and SA Water rating scales. Cover raw water pumping, plant inlet, mixing, flocculation, sedimentation, filtration, UV disinfection, and chemical dosing for alum, caustic, ammonia, PAC and fluoride, plus backwashing, treated water pumping and storage, and control building systems including PLC, SCADA, UPS and switchboards. Capture planned replacements, alarms and maintenance actions across assets.
by Engineering Solutions, from the Community
Downloads: 0
Get

Technical Quarterly PAC Injector Cleaning

Use this quarterly checklist to clean and service PAC (polyaluminium chloride) injectors used in swimming pool water treatment. Verify site details, isolate and flush lines, inspect and clean dosing pumps and injector nozzles, replace worn seals and tubing, calibrate feed rates, and record test results. Covers comp, leisure, spa, and lido pools. Supports consistent dosing, clear water, and compliance with facility procedures and safety controls.

by Jodie Coupland, from the Community

Get

Template

Trility Murray Bridge Water Treatment Inspection

This civil, structural, and materials inspection checklist is designed for the Trility Murray Bridge water treatment facility. It guides assessments across site access, fencing, grounds, and roads; safety showers and eyewash stations; PAC, alum, lime, caustic, chlorine, fluoride, and coagulant aid dosing; PAC contact tanks; flocculation and rapid mix units; sedimentation clarifiers and sludge suction components; filter tanks and backwash systems; UV disinfection kiosks, lamp wipers, channels, and cleaning systems; filtered water storage and pump stations; buildings including control rooms and chlorine rooms; and sludge lagoons. It also includes concrete cover surveys, carbonation depth, and chloride testing for external and internal walls, floors, and pipework, plus safe access checks, davits, valves, and general condition ratings.

by Engineering Solutions, from the Community

Get

Template

WPS Electrical Maintenance Report

This WPS Electrical Maintenance Report template supports water and wastewater sites with comprehensive electrical checks. Record site details and notify the control room before starting. Capture pump data including run hours, winding continuity, insulation resistance, test running load, and phase checks at no load and load conditions. Inspect sump pumps, floats, and PLC communications. Verify switchboard labeling, lighting, fuses, RCDs, SCADA alarm faults, backup battery condition, station comms, and tighten connections before cleaning cabinets. If present, check shaft encoder communications and connections. Document completed work, plan future tasks, and sign off to maintain compliance and operational reliability.

by Bailey Duncan, from the Community

Get

Template

ECI Site Inspection for TRILITY Loxton WTP

Use this Electrical, Control and Instrumentation site inspection checklist for the TRILITY Loxton Water Treatment Plant. Record equipment details and assess condition and criticality using TRILITY and SA Water rating scales. Cover raw water pumping, plant inlet, mixing, flocculation, sedimentation, filtration, UV disinfection, and chemical dosing for alum, caustic, ammonia, PAC and fluoride, plus backwashing, treated water pumping and storage, and control building systems including PLC, SCADA, UPS and switchboards. Capture planned replacements, alarms and maintenance actions across assets.

by Engineering Solutions, from the Community

Get

Fluoride and PAC Dosing Stations Maintenance Report

About author

You might also like

Technical Quarterly PAC Injector Cleaning

Trility Murray Bridge Water Treatment Inspection

WPS Electrical Maintenance Report

ECI Site Inspection for TRILITY Loxton WTP

You might also like

Technical Quarterly PAC Injector Cleaning

Trility Murray Bridge Water Treatment Inspection

WPS Electrical Maintenance Report

ECI Site Inspection for TRILITY Loxton WTP