Template

FOX Electrical Report - V1

by Tom Brehme, from the Community

10+

FOX Electrical Report V1 is a comprehensive electrical installation report for Fox ESS inverter and battery systems. The template guides installers through pre- and post-install photo capture, AC/DC cable routing, inverter setup, CT orientation, and safety labeling. It records consumer unit details, IP ratings, and required test results (Zs, Ze, PFC, insulation resistance). It includes BS7671 and MCS compliance declarations, customer handover, and signatures to validate final commissioning.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Alpha Electrical Report V1
Comprehensive checklist for commissioning and verifying Alpha inverter and battery installations. Capture pre install photos, confirm battery and inverter locations, document AC and DC cable runs, and record serial numbers for inverter, battery, and meters. Follow guidance on coupling, CT clamp setup, spacing, and safety. Include step by step power on and power off procedures, AlphaCloud and app configuration, and post install photos. Document consumer unit details, isolators, labels, and IP ratings. Record electrical test results including Zs, Ze, PFC, and insulation resistance. Confirm BS7671 and MCS compliance, complete customer handover, app walkthrough, and final signatures.
by Tom Brehme, from the Community
Downloads: 0
Get
Template
Solar Installation Report - Electrical V7
This solar installation report template guides electricians through pre and post install checks for residential or commercial PV systems. Record site details, capture photos of DC and AC cable runs, inverter, battery, and meters, and follow step by step wiring and configuration instructions. Verify CT clamp orientation, DIP switch settings, isolation, and IP ratings. Document consumer unit connections, test results including Zs, Ze, PFC, insulation resistance, and confirm compliance with BS7671 and MCS. Includes customer handover and sign off.
by Bilal Islam, from the Community
Downloads: 0
Get
Template
Solar Installation Report - Electrical V8
Use this solar installation report to document electrical work before and after installation. Record customer details, locations, and serial numbers. Follow the inverter checklist including DIP switch settings, BMS cabling, CT clamp orientation, and data wiring between grid meter, inverter, and battery. Capture AC and DC cable runs, inverter and battery photos, isolators, hazard labels, and commissioning screenshots. Log consumer unit details, test results (Zs, Ze, PFC, insulation resistance), and confirm BS7671 and MCS compliance. Provide handover documents and customer sign-off.
by Bilal Islam, from the Community
Downloads: 0
Get
Template
Post-Install Electrical Checklist V6
Use this V6 post-install electrical checklist to validate solar inverter and battery installations. It guides installers through pre-install photos, inverter setup, DIP switch and data cabling, CT clamp orientation, dongle connectivity, and AC and DC runs. Capture post-installation images, consumer unit details, and test results including Zs, Ze, PFC, insulation, and string voltages. Confirm labels, seals, clearances, isolation points, and customer handover, aligned with BS7671 and MCS guidelines.
by Bilal Islam, from the Community
Downloads: 0
Get

Alpha Electrical Report V1

Comprehensive checklist for commissioning and verifying Alpha inverter and battery installations. Capture pre install photos, confirm battery and inverter locations, document AC and DC cable runs, and record serial numbers for inverter, battery, and meters. Follow guidance on coupling, CT clamp setup, spacing, and safety. Include step by step power on and power off procedures, AlphaCloud and app configuration, and post install photos. Document consumer unit details, isolators, labels, and IP ratings. Record electrical test results including Zs, Ze, PFC, and insulation resistance. Confirm BS7671 and MCS compliance, complete customer handover, app walkthrough, and final signatures.

by Tom Brehme, from the Community

Get

Template

Solar Installation Report - Electrical V7

This solar installation report template guides electricians through pre and post install checks for residential or commercial PV systems. Record site details, capture photos of DC and AC cable runs, inverter, battery, and meters, and follow step by step wiring and configuration instructions. Verify CT clamp orientation, DIP switch settings, isolation, and IP ratings. Document consumer unit connections, test results including Zs, Ze, PFC, insulation resistance, and confirm compliance with BS7671 and MCS. Includes customer handover and sign off.

by Bilal Islam, from the Community

Get

Template

Solar Installation Report - Electrical V8

Use this solar installation report to document electrical work before and after installation. Record customer details, locations, and serial numbers. Follow the inverter checklist including DIP switch settings, BMS cabling, CT clamp orientation, and data wiring between grid meter, inverter, and battery. Capture AC and DC cable runs, inverter and battery photos, isolators, hazard labels, and commissioning screenshots. Log consumer unit details, test results (Zs, Ze, PFC, insulation resistance), and confirm BS7671 and MCS compliance. Provide handover documents and customer sign-off.

by Bilal Islam, from the Community

Get

Template

Post-Install Electrical Checklist V6

Use this V6 post-install electrical checklist to validate solar inverter and battery installations. It guides installers through pre-install photos, inverter setup, DIP switch and data cabling, CT clamp orientation, dongle connectivity, and AC and DC runs. Capture post-installation images, consumer unit details, and test results including Zs, Ze, PFC, insulation, and string voltages. Confirm labels, seals, clearances, isolation points, and customer handover, aligned with BS7671 and MCS guidelines.

by Bilal Islam, from the Community

Get

FOX Electrical Report - V1

About author

You might also like

Alpha Electrical Report V1

Solar Installation Report - Electrical V7

Solar Installation Report - Electrical V8

Post-Install Electrical Checklist V6

You might also like

Alpha Electrical Report V1

Solar Installation Report - Electrical V7

Solar Installation Report - Electrical V8

Post-Install Electrical Checklist V6