Template

ESSW SMS 911 ATS Test Checklist

by Melvin keyani, from the Community

Use this checklist to document ATS details, confirm controller modes, verify indicator lamps, and perform safe automatic and manual transfers between supply sources. Steps include opening and closing supplies, testing delays, resetting from secondary to primary, and capturing sign off from contractor and client. Ideal for facility teams maintaining reliable power for 911 operations.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Automatic Transfer Switch (ATS) Test Checklist
This ATS test checklist helps technicians verify the performance of an Automatic Transfer Switch for critical power systems. Record ATS details and locations, then confirm controller modes, delay settings, and indicator lamps. Walk through automatic and manual transfer procedures between S1 and S2 sources, including opening and closing sequences on the LV panel and load switching. Capture noncompliances and finalize with sign-offs for contractors and clients to ensure safe, reliable power transfer.
by Melvin keyani, from the Community
Downloads: 0
Get
Template
NFPA 110 ATS Testing Checklist for Power Plants
Ensure compliance with NFPA 110 Sec 8.4.6 using this ATS testing checklist for power plants. Conduct monthly transfer tests from normal to emergency and back, complete pre-test inspections, and verify control modules, breakers, fuses, and indicator lamps. Record TDNE and TDEN timings, note alarms during synchronization, and confirm restored power. Log hourly readings for ATS E1 and ATS 1 including voltages, current, frequency, load, kW, kVA, kVAR, and power factor. Capture observations, recommendations, photos, and technician signatures to maintain reliable emergency power systems.
by FAC Maintenance Team, from the Community
Downloads: 10+
Get
Template
ESSW Initial Energisation Pre-Power Checklist
Use this ESSW initial energisation and pre-power checklist to prepare electrical systems for commissioning. Verify permits and approvals, review dead test results and cable checks, confirm main supply installation and testing, earthing and bonding, lightning protection, EPO installation and operation, labeling and torque settings, and switch room security and signage. Ensure safety equipment, lighting, fire stopping, housekeeping, and earth pits are in order. Includes sign-off for Duty Holder, Authorised Person, and Project Manager.
by Melvin keyani, from the Community
Downloads: 0
Get
Template
ATS Job Hazard Analysis (JHA) Template
This ATS Job Hazard Analysis (JHA) template helps teams break down job steps, identify potential hazards, and implement control measures before starting work. It includes prompts to confirm SWMS availability and toolbox briefings, assess whether other locations are affected, and verify adequate PPE supplies. Users can document each step’s initial risk level, list specific dangers, outline controls, and record the residual risk after controls. The template captures site and contractor details, personnel, dates, and provides multiple signature fields for verification, supporting robust construction site safety and compliance.
by Josh Hamilton, from the Community
Downloads: 20+
Get

Automatic Transfer Switch (ATS) Test Checklist

This ATS test checklist helps technicians verify the performance of an Automatic Transfer Switch for critical power systems. Record ATS details and locations, then confirm controller modes, delay settings, and indicator lamps. Walk through automatic and manual transfer procedures between S1 and S2 sources, including opening and closing sequences on the LV panel and load switching. Capture noncompliances and finalize with sign-offs for contractors and clients to ensure safe, reliable power transfer.

by Melvin keyani, from the Community

Get

Template

NFPA 110 ATS Testing Checklist for Power Plants

Ensure compliance with NFPA 110 Sec 8.4.6 using this ATS testing checklist for power plants. Conduct monthly transfer tests from normal to emergency and back, complete pre-test inspections, and verify control modules, breakers, fuses, and indicator lamps. Record TDNE and TDEN timings, note alarms during synchronization, and confirm restored power. Log hourly readings for ATS E1 and ATS 1 including voltages, current, frequency, load, kW, kVA, kVAR, and power factor. Capture observations, recommendations, photos, and technician signatures to maintain reliable emergency power systems.

by FAC Maintenance Team, from the Community

10+

Get

Template

ESSW Initial Energisation Pre-Power Checklist

Use this ESSW initial energisation and pre-power checklist to prepare electrical systems for commissioning. Verify permits and approvals, review dead test results and cable checks, confirm main supply installation and testing, earthing and bonding, lightning protection, EPO installation and operation, labeling and torque settings, and switch room security and signage. Ensure safety equipment, lighting, fire stopping, housekeeping, and earth pits are in order. Includes sign-off for Duty Holder, Authorised Person, and Project Manager.

by Melvin keyani, from the Community

Get

Template

ATS Job Hazard Analysis (JHA) Template

This ATS Job Hazard Analysis (JHA) template helps teams break down job steps, identify potential hazards, and implement control measures before starting work. It includes prompts to confirm SWMS availability and toolbox briefings, assess whether other locations are affected, and verify adequate PPE supplies. Users can document each step’s initial risk level, list specific dangers, outline controls, and record the residual risk after controls. The template captures site and contractor details, personnel, dates, and provides multiple signature fields for verification, supporting robust construction site safety and compliance.

by Josh Hamilton, from the Community

20+

Get

ESSW SMS 911 ATS Test Checklist

About author

You might also like

Automatic Transfer Switch (ATS) Test Checklist

NFPA 110 ATS Testing Checklist for Power Plants

ESSW Initial Energisation Pre-Power Checklist

ATS Job Hazard Analysis (JHA) Template

You might also like

Automatic Transfer Switch (ATS) Test Checklist

NFPA 110 ATS Testing Checklist for Power Plants

ESSW Initial Energisation Pre-Power Checklist

ATS Job Hazard Analysis (JHA) Template