Template

Quality Control Form for Weatherization Install

by Flint Whitesell, from the Community

Use this quality control form to standardize weatherization and HVAC install inspections. Capture customer and job details, crew, dates, and man-hours. Verify lead safety, condensate management, unit leveling, split or packaged system details, subcool/superheat and pressures, leak testing, vacuum hold, line set routing and insulation, safety switches, and refrigerant added. Document mini-split handover, filter cleaning, and remote mounting. Check gas systems, flue installation, electrical sizing and fuses, airflow and static pressure, return sizing, and temperature split. Confirm filters installed and spares provided, heating and cooling run tests, duct sealing and code compliance, register alignment, bath fan installs, flex routing, sensors, roof penetrations, and site cleanliness. Record photos, issues, follow-ups, and confirm standards met.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions .

Template
Comfort System Survey
Use this Comfort System Survey to gather the details required for a successful HVAC installation or change-out. Capture homeowner and site info, job schedule, system and job type including split, package, furnace, AC, or mini split, air handler specifications and location, electrical service and panel details, flue and roof requirements, gas line runs, ductwork and return sizes, and included thermostats and accessories. Add notes plus photos of panels, conduit, and the workspace to streamline planning and ensure a smooth, high quality install.
by Geno Gruber, from the Community
Downloads: 10+
Get
Template
HVAC Minor Inspection and PM North Zone 3
Use this HVAC minor inspection and preventive maintenance checklist for North Zone 3. Capture site and unit details, list equipment names for split systems, replace filters to MERV 8 or MERV 13 for LEED sites, clean and flush evaporator pans and drains, verify drain sizing and slope, and set thermostats to standards. Supports packaged AC and heat pumps, gas packs, mini split and split systems, chillers, boilers, and rooftop units. Includes prompts for photos, dates, and a retail HVAC assessment when units are new.
by Kacey Buffington, from the Community
Downloads: 0
Get
Template
HVAC Minor Inspection South Zones 1 and 2
Use this HVAC minor inspection and preventive maintenance template for South Zones 1 and 2. Record site ID and work order, choose unit type (Packaged AC or HP, Gas Pack, Mini Split, Split System, Chiller, Boiler, Cooling Tower, Roof Top Unit, or Other), and list both units for split systems. Replace filters with MERV 8 (MERV 13 for LEED), date-mark frames, and attach photos. Clean and flush evaporator drain pan, trap, and drain line; install pan tabs; and verify drain sizing, slope, and support. Confirm thermostats meet PNC standards, note VAV or fan-powered units, and complete the Retail HVAC Assessment Survey for new units.
by Kacey Buffington, from the Community
Downloads: 0
Get
Template
Pre-Measure Form for HVAC and Insulation Projects
This pre-measure form standardizes data collection for HVAC and related scope before installation. Capture whether the home is lead-safe, unit replacement details, packaged or split systems, gas pack or heat pump, roof or ground mounts, duct covers, roof jack dimensions and pitch. Record furnace type, condenser pad and line set needs, filter bases, condensate pumps, cranes, power requirements and panel type. Document equipment size, re-duct scope, permits, thermostat wiring, return duct and grille sizes, new returns, supply trunk or flex, and added supply vents. Include bathroom and kitchen fan installs, power and venting, cleaning and sealing, room pressure relief using jump ducts or grilles, and framing clearances. Provide Manual J inputs, home orientation, construction types, mobile home status, and insulation work including attic access, dormer vents, can lights and batt realignment. Add notes and certify accuracy.
by Flint Whitesell, from the Community
Downloads: 0
Get

Quality Control Form for Weatherization Install

About author

You might also like

Comfort System Survey

HVAC Minor Inspection and PM North Zone 3

HVAC Minor Inspection South Zones 1 and 2

Pre-Measure Form for HVAC and Insulation Projects

You might also like

Comfort System Survey

HVAC Minor Inspection and PM North Zone 3

HVAC Minor Inspection South Zones 1 and 2

Pre-Measure Form for HVAC and Insulation Projects