Template

Party Wall Drylining QA Checklist South Thamesmead II

by Ionuț Țuțuianu, from the Community

Quality assurance checklist for party wall drylining on South Thamesmead Phase II. Verify correct installation of bottom and deep tracks, deflection allowances, firestrips or mastic, and stud spacing. Check fixing plates, set-out compliance, party wall junctions, cavity insulation including APR and 35 kg per m3 mineral wool, and fire rated walls at 90 or 120 minutes. Identify IR01 to IR03 riser or smoke shaft wall types, timber studs to door jambs, security mesh, and screw spacing at 300 mm. Confirm service fixing plasterboard strips, screed shutters, use of British Gypsum materials, site cleanliness, and capture photo evidence and signatures.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Party Wall Drylining QA Checklist
This construction QA checklist supports inspection of party wall drylining for South Thamesmead Phase II. It guides supervisors and subcontractors through checks on bottom and deep tracks, stud spacing and deflection gaps, fire strips and mastic, identification of wall types and junctions, cavity insulation (including 35 kg/m3 mineral and APR insulation), and 90/120 minute fire-rated partitions. It includes verification of IR01/IR02/IR03 riser and smoke shaft walls, timber studs at door jambs, security mesh, screw spacing to a 300 mm maximum, service fixing plasterboard strips, and screed shutters. The checklist emphasizes use of British Gypsum materials, requires photo evidence for key steps, and confirms areas are left clean, with sign-offs from contractor and client.
by Ionuț Țuțuianu, from the Community
Downloads: 0
Get
Template
QA Party Wall First Fix Checklist
This party wall first fix QA checklist supports site managers and installers in verifying early-stage partition works. It covers use of current drawings and specifications, setting out and dimensional checks, stud alignment and spacing, deflection head details, correct plasterboard types, junctions to external walls with mastic, fire and acoustic sealing, square corners, correctly formed openings, installation of noggins, screed and head strips, and final plot clearance for handover. Ideal for documenting visual, dimensional, and photographic evidence during inspections.
by Donatas Miglinas, from the Community
Downloads: 10+
Get
Template
SFS, Board and EPDM QA - South Thamesmead Phase II
Conduct a structured quality assurance inspection for South Thamesmead Phase II covering SFS wall framing, sheathing boards, and EPDM interfaces. Verify materials, fixings, manufacturer specifications, and drawings; check gridlines, openings, MVHR ducts, deflection heads, brick tie layout, board type and thickness, fixings spacing, taping and sealing, and EPDM type and fit at deflection joints and concrete interfaces. Capture photos, record datums and FFL, note issues, and complete signatures for contractor and client sign-off.
by Alex Gafita, from the Community
Downloads: 0
Get
Template
Plastering QA - South Thamesmead Phase II
Use this plastering quality assurance checklist for South Thamesmead Phase II to verify substrate readiness, scrim taping of joints and intersections, correct fixing of corner beads, complete and even skim application, clean electrical boxes, pulled-through cabling, and tidy skirting lines. Record evidence for each item, attach photos, note defects and remedial actions, and obtain supervisor and client sign-offs. Ideal for site managers, subcontractors, and QA teams to standardize inspections and handover readiness on interior plastering works.
by Ionuț Țuțuianu, from the Community
Downloads: 0
Get

Party Wall Drylining QA Checklist South Thamesmead II

About author

You might also like

Party Wall Drylining QA Checklist

QA Party Wall First Fix Checklist

SFS, Board and EPDM QA - South Thamesmead Phase II

Plastering QA - South Thamesmead Phase II

You might also like

Party Wall Drylining QA Checklist

QA Party Wall First Fix Checklist

SFS, Board and EPDM QA - South Thamesmead Phase II

Plastering QA - South Thamesmead Phase II