Template

Apartment Plumbing Final QA Checklist

by Patrick Mcloughlin, from the Community

Use this checklist to verify apartment plumbing installations at final QA before handover. Inspect kitchens and bathrooms for correct installation and operation: dishwasher waste with check valve, kitchen taps and sink flood tests, stopcock, water heater, PRV settings, tundish to British Standards, waterless traps, scale reducers, and HIU fitment and level. Confirm washing machine valves, toilets, flush plates, basins, wastes and flood tests, showers, baths, drains, and fillers. Validate heating systems including radiators, towel rails, TMVs, inhibitor dosing, pressure tests, and HIU commissioning. Capture foreman sign off and ensure compliance with current mechanical drawings and standards.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
House/Apartment Plumbing Final QA Checklist
This residential plumbing final QA checklist helps verify house and apartment installations before handover. Inspect the boiler or HIU cupboard for commissioning, testing, stopcocks, inhibitors, scale reducers, and correct tundish and waterless trap installation. Check kitchens for taps, correct hot/cold orientation, wastes, dishwasher and washing machine connections, and flood testing. In bathrooms, confirm toilets, basins, showers, and baths are installed, level, connected, and flood tested, with traps, fillers, and valves operating correctly. Review radiators for fitment, level, TMVs, and performance. Document drawing references, flat details, capture photos, and obtain required site foreman signatures for completion and compliance.
by Michael Millington, from the Community
Downloads: 0
Get
Template
Plumbing Finals QA Checklist for Apartments and Houses
This comprehensive plumbing finals QA checklist helps inspectors and contractors verify apartment or house installations before handover. It covers cupboard equipment (water heater or HIU), commissioning, inhibitor, radiator levels and TMVs, stopcock position, scale reducer, tun-dish, waterless traps, pipework alignment and lagging. Kitchen checks include taps, wastes, dishwasher and washing machine connections, and flood testing. Bathroom checks verify toilets, basins, showers or baths, traps, drains, towel rails, and flood tests, concluding with apartment completion sign-offs.
by Patrick Mcloughlin, from the Community
Downloads: 0
Get
Template
Box and Charnock Social Apartment Functionality Inspection
Use this Social Apartment Functionality Inspection to verify that residential units are complete and operational before handover. The checklist covers district heating and HIU availability, lighting and socket operation, smoke detectors, heating controls and TRVs, MVHR ventilation, and HIU cupboard checks including consumer units, isolation switches, labeling, and pipework. It also includes kitchen, bathroom, and cloakroom fixtures, taps, overflows, and toilets, plus safety and labeling requirements. Suitable for commissioning, QA, and maintenance of social housing apartments.
by Jason Barnes, from the Community
Downloads: 10+
Get
Template
MBS QA M 3.1 HIU Commissioning Sheet
This MBS QA M 3.1 HIU Commissioning Sheet helps engineers and QA teams commission heat interface units in apartments or dwellings. Record property and HIU details, serial numbers, and checks for valves, insulation, electrical supply, and strainers. Capture heating mode parameters including design flow and return temperatures, pressures, and eight heat meter readings. Verify secondary heating setup, pump settings, thermostat configuration for multiple zones, valve actuation, inhibitor and flushing certification, and system shutdown behavior. In hot water mode, log HIU thermostat settings, heat meter readings, and tap temperatures and flow rates for each appliance. Include cold water meter readings and engineer sign-off to complete a compliant handover.
by Danny Denton, from the Community
Downloads: 0
Get

Apartment Plumbing Final QA Checklist

About author

You might also like

House/Apartment Plumbing Final QA Checklist

Plumbing Finals QA Checklist for Apartments and Houses

Box and Charnock Social Apartment Functionality Inspection

MBS QA M 3.1 HIU Commissioning Sheet

You might also like

House/Apartment Plumbing Final QA Checklist

Plumbing Finals QA Checklist for Apartments and Houses

Box and Charnock Social Apartment Functionality Inspection

MBS QA M 3.1 HIU Commissioning Sheet