Template

Ancon Restraint System and 110mm Rockwool Installation

by Alex Dobra, from the Community

This installation checklist supports safe, compliant fitting of Ancon wall restraint channels and 110mm Rockwool cavity insulation. It covers correct selection of fixings for SFS, timber, steel, and concrete, hole sizes, minimum embedment and hole depth, driver torque, and vertical screw spacing. Guidance includes insulation orientation, staggered layout, tight joints, bracket interfaces, and typical fixing patterns with stainless washers. The template provides inspection fields, photo evidence, and sign-offs for JC Drylining Ltd and the main contractor, plus comments for close-out.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions .

Template

Rockwool Rainscreen Duo Slab Quality Assurance

This quality assurance checklist helps construction teams verify installation of Rockwool Rainscreen Duo Slab. Confirm correct insulation thickness and orientation, close butted joints, staggered horizontal joints, and tight fitting around penetrations and fire breaks. Check centre and perimeter fixings with appropriate stainless or galvanised washers. Capture snagging items and record client, building control, and other sign offs to ensure the layer is ready for handover.

by lyle House, from the Community

Get

Template

BLACK LION HOUSE - ROCKWOOL Insulation QA

This ROCKWOOL insulation quality assurance checklist is designed for Black Lion House projects using Duoslab boards. It helps site teams confirm correct board orientation with the weatherproof face outward and branding horizontal, the use of specified fixings with nylon or stainless steel washers as per manufacturer guidance, correct staggered board layout, and snug abutment to vertical and horizontal firebreaks with no gaps. The template includes fields for main contractor, project number, QA sheet number, elevation/location, level, and comments, plus sign-off by the project manager and client site manager.

by David Tucker, from the Community

Get

Template

Installation of Steel Framing System Checklist

This installation checklist helps contractors and site teams verify key steps in steel framing works. It covers design compliance, deflection heads (25 mm) per engineering details, correct stud gauge/size and maximum 600 mm spacing, window openings per architectural drawings, and the installation of Siniat weather defense boards. It also checks use of GTEC fire-rated silicone sealant at board joints and at interfaces with concrete, plus correct fixings and spacing (max 300 mm, 13–20 mm from board edges). Use it to document locations, responsible parties, and sign-off to drive quality and compliance.

by Sebastian Szabo, from the Community

Get

Template

Party Wall Drylining QA Checklist

This construction QA checklist supports inspection of party wall drylining for South Thamesmead Phase II. It guides supervisors and subcontractors through checks on bottom and deep tracks, stud spacing and deflection gaps, fire strips and mastic, identification of wall types and junctions, cavity insulation (including 35 kg/m3 mineral and APR insulation), and 90/120 minute fire-rated partitions. It includes verification of IR01/IR02/IR03 riser and smoke shaft walls, timber studs at door jambs, security mesh, screw spacing to a 300 mm maximum, service fixing plasterboard strips, and screed shutters. The checklist emphasizes use of British Gypsum materials, requires photo evidence for key steps, and confirms areas are left clean, with sign-offs from contractor and client.

by Ionuț Țuțuianu, from the Community

Get

Template

Siderise Cavity Barriers QA Checklist

Use this quality assurance checklist to verify correct installation of Siderise cavity barriers on brick slip and aluminum rainscreen facades. Check product selection for RH25-90/30 open state horizontal and RV 90/30 full fill vertical barriers, bracket type and spacing, orientation, tight joints and taping, vertical priority, and 25 mm maximum air gaps. Confirm penetrations are reviewed, thermal insulation cut back, OSCIs used as specified, and fixings in stainless steel at stated centers. Capture sign off from contractor and client.

by Eduardo dos Santos, from the Community

Get

Template

A2O Rockwool Fire Barrier QA Checklist

This A2O Rockwool fire barrier quality assurance checklist guides teams through materials verification, pre-installation preparation, and installation inspections. It covers confirming the correct fire barrier type, brackets, fixings, and tape against the project schedule, proper storage, and coordination with the supplier. Pre-installation steps include having construction drawings on site and briefing operatives. Vertical and horizontal installation checks verify bracket penetration and spacing, barrier thickness relative to cavity size, tight abutments, foil tape sealing, and the use of pigtail screws. The checklist concludes with signatures for installer, contractor, and client sign-off.

by Roman Fedenko, from the Community

Get

Ancon Restraint System and 110mm Rockwool Installation

About author

You might also like

Rockwool Rainscreen Duo Slab Quality Assurance

BLACK LION HOUSE - ROCKWOOL Insulation QA

Installation of Steel Framing System Checklist

Party Wall Drylining QA Checklist

Siderise Cavity Barriers QA Checklist

A2O Rockwool Fire Barrier QA Checklist

You might also like

Rockwool Rainscreen Duo Slab Quality Assurance

BLACK LION HOUSE - ROCKWOOL Insulation QA

Installation of Steel Framing System Checklist

Party Wall Drylining QA Checklist

Siderise Cavity Barriers QA Checklist

A2O Rockwool Fire Barrier QA Checklist