Template

Submain Installation Inspection Checklist

This submain installation inspection template helps electricians and site teams verify compliance during electrical submain works. Capture the submain ID, cable and earth sizes, confirm cable types meet standards, record origin and destination switchboards, and check supports and labeling. Add photos, mark up drawings, and document point to point and insulation resistance test results. Finish with comments and sign off for completion.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions .

Template

Control Cable Installation Inspection Checklist

This control cable installation inspection checklist supports quality assurance for electrical works on construction and industrial sites. It guides field teams through visual checks and documentation, including cable type and size, earth size, labeling, mechanical protection, correct glands and polarity, and core identification. It includes structured point‑to‑point core verification across multiple cable sizes, plus insulation resistance, earth and screen earth continuity tests. Attach photos, mark up drawings, complete close‑out steps, and record who completed the inspection.

by Jacquie Fisher, from the Community

Get

Template

Electrical Inspection and Test Checklist 009

This electrical inspection and test checklist helps verify compliance at project completion. Use it to confirm equipment calibration, MEN link connection, labeling of earth locations and stakes, and MCCB fault protection settings. Document polarity checks, three phase rotation, insulation resistance for mains, submains, switchboards and equipment, and earth continuity and resistance. Record RCD tests and earth fault loop impedance EFLI in line with AS NZS 3000. Attach test reports, capture photos, add notes, and record operator and supervisor sign off before handover.

by Nick Bunnage, from the Community

20+

Get

Template

PAT Test Checklist

Use this PAT test checklist to help verify the safety of portable appliances across your site. Log appliance ID, location, and photos, perform visual inspections, and record key test results including earth continuity and insulation resistance. Mark pass or fail, add notes and corrective actions, and keep a clear audit trail for compliance. Ideal for facility managers, electricians, and safety teams maintaining regular PAT programs.

by Eli Steinmetz, from the Community

10+

Get

Template

Electrical Cable Test Checklist

Use this cable test checklist to plan and record electrical pre commissioning and pre energization tests on installed cables and switchboards. Capture project and location details, confirm site readiness, and verify crew sign on. Log test equipment make and model, serial numbers, and calibration due dates for insulation testers, multimeters, and clamp meters. Document cable endpoints, select test voltages, and record insulation resistance results between phases, phase to neutral, and phase to earth, with guidance that values should be at least 1 Mohm. Perform continuity checks with phases bonded to neutral at one end and verify results meet 0.5 ohm criteria. Include tester battery and lead checks and confirm compliance with AS3000 before energization.

by Nagavishnu Sadasiva Panicker, from the Community

Get

Template

Energising Switchboards Inspection & Test Checklist

Streamline pre-energisation checks for electrical switchboards. This practical checklist guides electricians through safety and compliance steps: verifying no exposed live parts, correct earthing and bonding, protecting cable entries, consistent breaker orientation, and secure terminations. Record insulation resistance (meggar) and main earth results, check CT shorting links, confirm phase rotation, and set overloads to the single line diagram. Ensure labeling, access clearances, lockout and tagging, and placement of required notices. Capture approvals and certificates to meet AS/NZS 3000 requirements and document commissioning.

by Nick Bunnage, from the Community

40+

Get

Template

JTC Electrical Test Sheet (07/24/21)

This electrical test sheet template supports documenting circuit or equipment types, circuit numbers, protection types and sizes, phase and neutral details, cable sizes, and key test results. Record continuity, insulation resistance, polarity, fault loop impedance, and operational checks across multiple circuits to verify compliant installation and performance during commissioning.

by Jason Lazzarini, from the Community

Get