Template

Roofing Safety Net Hand-Over and In-Use Inspections

by Lucian Galan, from the Community

Use this weekly checklist to hand over and inspect roofing safety nets on construction sites. Verify net condition, sag (5 to 10 percent), gaps to the structure, overlaps and lacing, knot security, correct attachments, and debris removal. Record site details, contractors, dates, remedial actions, positions, and signatures to document compliance and protect teams working at height.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Safety Net Hand Over and In Use Inspections
Use this weekly safety net hand over and in use inspection checklist to verify fall protection systems on construction sites. The form guides you through checks for visual damage, debris in the nets, gaps between the net and the structure, correct net sag of 5 to 10 percent, and adequate overlaps. Confirm lacing uses 8 mm lacing or 12 mm rope ties through every other mesh with correctly tied knots, and that all nets are attached to the structure or attachment devices properly. Ensure excess net is gathered or under rolled where necessary, verify that no materials are within 3 meters below the netted area at handover, and assess whether operatives working above the nets require additional safety measures. Capture date and time, site name, contractor details, remedial actions, and signatures to document compliance and continuous improvement.
by Lucian Galan, from the Community
Downloads: 10+
Get
Template
Safety Net Checklist Template
Use this safety net checklist to evaluate the effectiveness of your safety controls across high risk work. Review risk assessments, permits to work, training and supervision, physical barriers and interlocks, correct tools and PPE, safety walks and observations, and the Three Checks for Safety. Record findings, identify root causes, and close gaps to strengthen safe systems of work across operations in manufacturing and other industrial environments.
by Paul Henry, from the Community
Downloads: 10+
Get
Template
Roofing Site Safety Inspection Checklist
This roofing site safety inspection checklist helps crews verify critical controls before and during work. Inspect ladders, personal fall arrest systems, PPE, warning lines, safety monitor systems, pump jacks, scaffolds, power tools, and extension cords. Capture on-site notes, record items corrected or disciplinary actions, attach photos, and sign off to document compliance. Use this template to standardize daily inspections, reduce risk when working at heights, and improve safety performance across roofing projects.
by Dane Hansen, from the Community
Downloads: 30+
Get
Template
Hand Over Audit Checklist
Use this Hand Over Audit template to complete final construction inspections before client handover. Record job details, dates and preparer, verify ground levels fall away from the slab, confirm yard gullies are in place, ensure WHS inspection sheets are complete, and check touch-up paints and spare tiles are left on site. Capture photo evidence and signatures to document defects and approvals, and produce a clear, professional handover record.
by Cameron Gray, from the Community
Downloads: 20+
Get

Safety Net Hand Over and In Use Inspections

Use this weekly safety net hand over and in use inspection checklist to verify fall protection systems on construction sites. The form guides you through checks for visual damage, debris in the nets, gaps between the net and the structure, correct net sag of 5 to 10 percent, and adequate overlaps. Confirm lacing uses 8 mm lacing or 12 mm rope ties through every other mesh with correctly tied knots, and that all nets are attached to the structure or attachment devices properly. Ensure excess net is gathered or under rolled where necessary, verify that no materials are within 3 meters below the netted area at handover, and assess whether operatives working above the nets require additional safety measures. Capture date and time, site name, contractor details, remedial actions, and signatures to document compliance and continuous improvement.

by Lucian Galan, from the Community

10+

Get

Template

Safety Net Checklist Template

Use this safety net checklist to evaluate the effectiveness of your safety controls across high risk work. Review risk assessments, permits to work, training and supervision, physical barriers and interlocks, correct tools and PPE, safety walks and observations, and the Three Checks for Safety. Record findings, identify root causes, and close gaps to strengthen safe systems of work across operations in manufacturing and other industrial environments.

by Paul Henry, from the Community

10+

Get

Template

Roofing Site Safety Inspection Checklist

This roofing site safety inspection checklist helps crews verify critical controls before and during work. Inspect ladders, personal fall arrest systems, PPE, warning lines, safety monitor systems, pump jacks, scaffolds, power tools, and extension cords. Capture on-site notes, record items corrected or disciplinary actions, attach photos, and sign off to document compliance. Use this template to standardize daily inspections, reduce risk when working at heights, and improve safety performance across roofing projects.

by Dane Hansen, from the Community

30+

Get

Template

Hand Over Audit Checklist

Use this Hand Over Audit template to complete final construction inspections before client handover. Record job details, dates and preparer, verify ground levels fall away from the slab, confirm yard gullies are in place, ensure WHS inspection sheets are complete, and check touch-up paints and spare tiles are left on site. Capture photo evidence and signatures to document defects and approvals, and produce a clear, professional handover record.

by Cameron Gray, from the Community

20+

Get

Roofing Safety Net Hand-Over and In-Use Inspections

About author

You might also like

Safety Net Hand Over and In Use Inspections

Safety Net Checklist Template

Roofing Site Safety Inspection Checklist

Hand Over Audit Checklist

You might also like

Safety Net Hand Over and In Use Inspections

Safety Net Checklist Template

Roofing Site Safety Inspection Checklist

Hand Over Audit Checklist