Template

Footpath, Bus Bay, Kerb & Channel QA/QC Checklist

by Prachit Kumar, from the Community

Comprehensive QA/QC checklist for civil works including footpaths, bus bays, underground service conduits, and kerb and channel construction. Covers hard fill preparation, set-out and survey as-builts, trenching and bedding, backfill and warning tape, formwork quality, steel reinforcement, construction joints, and concrete placement and curing. Includes on-site tests such as slump, cylinders at 7 and 28 days, vibration, workmanship checks, and post-pour assessment for shrinkage or cracking. Designed to support consistent quality, client approvals, and compliance with specifications and standards.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Concrete Works Checklist
Use this concrete works inspection checklist to plan and document pre-pour and post-pour controls. Items include risk assessment, site preparation, formwork accuracy and propping, cast-in items, movement joints, placement method, reinforcement size and spacing, cleanliness, ambient temperature, mix verification and slump tests, test cubes, surface finish, curing and protection, backpropping, housekeeping, and hazard controls to support quality, safety, and handover.
by Steve Hickey, from the Community
Downloads: 20+
Get
Template
Footpath Drainage and Kerb and Channel Checklist
Use this civil works checklist to plan and assess footpath drainage and kerb and channel activities. Verify trench alignment, line, level and depth. Specify approved backfill materials such as GAP 65, GAP 40, AP 40, AP 20 and F2, and record staged compaction with Clegg results. Check pipe support, jointing to manufacturer specifications, discharge and manhole connections, and drainage layer heights. For footpaths, confirm subgrade CBR targets, basecourse thickness, concrete strength and thickness, surface finish, expansion joints, line marking and reinstatement of berms and surface covers. Include vehicle crossings, haunching, pointing, seeding and catchpit sealing.
by Brandy Graham, from the Community
Downloads: 30+
Get
Template
Cardno Site Inspection Checklist
This Cardno site inspection checklist supports land development and civil works projects. It covers site establishment, traffic and environmental management, demolition and preparation, bulk earthworks, pavements, kerb and channel, and concrete works. Detailed sections guide drainage, sewer, and water installations, including trenching, bedding, testing, and asset recording. It also addresses electrical and communications services, signage, linemarking, retaining walls, and quality verification. Use it to monitor safety, quality, and compliance with council and authority standards throughout construction.
by James Sorraghan, from the Community
Downloads: 10+
Get
Template
Site Quality Inspection Checklist V.01
This site quality inspection checklist template supports construction QA/QC across civil and structural works. Sections cover site forms, NCRs, RFIs, ITPs, and finishes; drainage and manhole installation; reinstatement and testing; services installation with warning tapes and depth checks; instrument logs and calibration; waterproofing and gas membrane training, installation, lapping, and sign-offs; pre-pour checks for reinforcement, cover, post-tension and cast-ins; post-pour finishes for slabs, columns, walls, and stairs; fire collar schedules, certificates, and photo evidence; handover tracking and client acceptance; as-built status of penetrations, slab edges, and facade cast-ins; and concrete quality controls such as slump tests, cube temperature logs, and 28-day results. Designed to help teams capture issues, track closeouts, and deliver compliant handovers.
by Ismail Docrat, from the Community
Downloads: 10+
Get

Footpath, Bus Bay, Kerb & Channel QA/QC Checklist

About author

You might also like

Concrete Works Checklist

Footpath Drainage and Kerb and Channel Checklist

Cardno Site Inspection Checklist

Site Quality Inspection Checklist V.01

You might also like

Concrete Works Checklist

Footpath Drainage and Kerb and Channel Checklist

Cardno Site Inspection Checklist

Site Quality Inspection Checklist V.01