Template

Fire Point Inspection Checklist Ref SF57

by Warren Donnelly, from the Community

10+

Use this fire point inspection template to conduct a visual check of each fire point on site. Confirm the correct number and type of extinguishers are present, signage is in place, safety pins and tamper seals are intact, gauges read in the green, and operating instructions are legible. Check for recent service within 12 months, confirm the fire point is visible and unobstructed, and verify there is a means to raise the alarm and an evacuation plan displayed.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Fire Point Inspection Checklist
Use this Fire Point Inspection template to perform a consistent weekly check of fire points on site. Verify that fire points are clean, unobstructed, and correctly signed, that alarms and sounders function with good batteries, and that the right types of extinguishers are present, in date, and fully charged. Record actions required and standardize fire safety compliance across construction projects and facilities.
by Mark Forshaw, from the Community
Downloads: 30+
Get
Template
Monthly Fire Extinguishers Visual Check
Use this monthly fire extinguisher visual check template to verify each unit is present, visible, and accessible; that labels and operating instructions are legible; pins, tamper seals, and hoses are intact; gauges show adequate pressure; and bodies, nozzles, and brackets are undamaged. Record extinguisher ID and location, capture notes and photos, flag defects, and assign follow-up actions. Support OSHA and NFPA 10 requirements and maintain a reliable audit trail for routine facility safety inspections.
by Mauricio Silva, from the Community
Downloads: 0
Get
Template
Manual Call Point Checks
Use this weekly manual call point checklist to confirm each fire alarm activation point is visible, accessible, and in good condition. Record locations and counts of MCPs, check the glass and casing, confirm emergency number visibility, note any replacements needed, and capture date, time, name, and signature. Log findings to support building safety compliance and keep fire alarm systems ready for emergencies.
by Howard Mason, from the Community
Downloads: 10+
Get
Template
Weekly Fire Alarm and Extinguisher Check
This weekly checklist helps facility teams verify fire safety readiness across a site. Inspect and activate manual call points and confirm sounders operate correctly at each fire point in the foyer, plant room, arena, and store room. Check that water, foam, powder, and CO2 extinguishers are present, have intact tags, and show full or correct pressure on gauges. Ensure required information signage is in place adjacent to each extinguisher and confirm emergency lighting functions across all areas. Use the documented procedure to place the system in test with the control room before alarm activation and restore monitoring afterward. Capture findings and signatures to maintain compliance and audit trails.
by Russell Macaloney, from the Community
Downloads: 20+
Get

Fire Point Inspection Checklist

Use this Fire Point Inspection template to perform a consistent weekly check of fire points on site. Verify that fire points are clean, unobstructed, and correctly signed, that alarms and sounders function with good batteries, and that the right types of extinguishers are present, in date, and fully charged. Record actions required and standardize fire safety compliance across construction projects and facilities.

by Mark Forshaw, from the Community

30+

Get

Template

Monthly Fire Extinguishers Visual Check

Use this monthly fire extinguisher visual check template to verify each unit is present, visible, and accessible; that labels and operating instructions are legible; pins, tamper seals, and hoses are intact; gauges show adequate pressure; and bodies, nozzles, and brackets are undamaged. Record extinguisher ID and location, capture notes and photos, flag defects, and assign follow-up actions. Support OSHA and NFPA 10 requirements and maintain a reliable audit trail for routine facility safety inspections.

by Mauricio Silva, from the Community

Get

Template

Manual Call Point Checks

Use this weekly manual call point checklist to confirm each fire alarm activation point is visible, accessible, and in good condition. Record locations and counts of MCPs, check the glass and casing, confirm emergency number visibility, note any replacements needed, and capture date, time, name, and signature. Log findings to support building safety compliance and keep fire alarm systems ready for emergencies.

by Howard Mason, from the Community

10+

Get

Template

Weekly Fire Alarm and Extinguisher Check

This weekly checklist helps facility teams verify fire safety readiness across a site. Inspect and activate manual call points and confirm sounders operate correctly at each fire point in the foyer, plant room, arena, and store room. Check that water, foam, powder, and CO2 extinguishers are present, have intact tags, and show full or correct pressure on gauges. Ensure required information signage is in place adjacent to each extinguisher and confirm emergency lighting functions across all areas. Use the documented procedure to place the system in test with the control room before alarm activation and restore monitoring afterward. Capture findings and signatures to maintain compliance and audit trails.

by Russell Macaloney, from the Community

20+

Get

Fire Point Inspection Checklist Ref SF57

About author

You might also like

Fire Point Inspection Checklist

Monthly Fire Extinguishers Visual Check

Manual Call Point Checks

Weekly Fire Alarm and Extinguisher Check

You might also like

Fire Point Inspection Checklist

Monthly Fire Extinguishers Visual Check

Manual Call Point Checks

Weekly Fire Alarm and Extinguisher Check