Everything teams need to work safely, meet higher standards, and improve every day.
Protect remote workers in real-time
One-stop shop for workplace safety equipment
SafetyCulture Care, combining risk management, tech, and insurance
SafetyDocs, trusted workplace health, safety, and quality documents
With SafetyCulture you can
Permit to work for approved Electrical contractors. Incl. Modification to the end of day declaration.
Free 1,000+ Workplace Checklists & Templates created by the SafetyCulture team.
This general permit to work template covers the entire Permit to Work System. Start by recording job details, tools and equipment to be used, and other work which may affect the tasks at hand. Next clearly identify tasks which are considered hazardous. You may conduct a risk assessment to evaluate uncontrolled or undetected hazards present on site. After which, ensure that precautions are being taken such as wearing proper PPE. Next endorse the Permit to Work to the Authorizing Officer for review before commencing work. Ensure that the permit information has been explained to all workers involved. Complete the audit by confirming that all necessary processes were rolled out and that it is safe to carry out the work defined. After the task is accomplished hand back the audit to the Authorizing personnel for confirmation and future reference.
This permit to work template was divided into 3 sections: Permit request, person engaging contractor or worker review and authorization. Each section entails confirmation from the persons-in-charge in accordance with key processes and protocols to ensure a safe working environment. Use SafetyCulture to create checklists with mandatory signature fields to validate audits and inspections. all specified high-risk tasks invoked with a work activity.
Use this template to assess the compliance of electrical safety measures for a given worksite. Do a site walkthrough and inspect the electrical tools and equipment being used (e.g switches, power lines, appliances, installations, wiring, cables, and cords). Evaluate if the workers are knowledgeable about electrical safety measures and are aware of their responsibility to report any hazards. Check that lock out tag out procedures are being followed by workers before performing any electrical maintenance and installation work. Provide an overall safety assessment of the workplace in managing electrical hazards.
Working in confined spaces poses numerous hazards to workers and entrants such as asphyxiation or loss of oxygen which leads to suffocation. Commencement of work must not begin until the appropriate level of authority has endorsed the Permit to Work. This template can be used record the mode of communication and rescue procedures to determine the team's preparedness during emergencies. Next conduct a pre-work check to assess if safety equipment and measures are in place to prevent accidents and injuries. Capture photo evidence of equipment defects or non compliances to confined space protocols. List all people involved in the work being performed.
