Template

Device Energisation Check Sheet

by Diarmuid O'Donovan, from the Community

This Device Energisation Check Sheet helps teams document pre-energisation visual inspections and electrical tests, including voltage readings, phase rotation, earth fault loop impedance, and prospective short circuit current. Capture site details, cable types and sizes, sources and destinations, and meter information. Validate functional start-up, verify communications indicators, and record commissioning readiness. Includes fields for comments, electrical licence number, and sign-off for a complete audit trail.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Switch Board Post Energisation Check Sheet
This switchboard post energisation check sheet guides electricians through pre-commissioning and commissioning checks to ensure safe energisation. It covers visual inspection for damage, presence and condition of escutcheons and covers, protection against access to live parts, confirmation of wiring, and readiness for energisation. Technicians record meter details, measure voltages at the SPD, main circuit breakers, RCDs and small breakers, verify phase rotation, and confirm WP meter and live indicators. The checklist includes RCD make and model and trip tests, circuit breaker settings, fault loop impedance and prospective short circuit values by phase, grading with upstream protection, sealing settings, and final lockout or tagout notes before energising final circuits.
by Diarmuid O'Donovan, from the Community
Downloads: 0
Get
Template
Switchboard Check Sheet for Pre Energisation
Use this ITR-13 switchboard pre energisation check sheet to confirm an installation is safe and ready before power on. Record visual inspection findings, verify earthing and MEN link, check cable terminations and torque, confirm labeling and drawings, and document continuity, insulation resistance, phasing, and circuit breaker settings. Capture photos, add comments, and complete sign off with licence number and date. Ideal for electrical contractors and commissioning teams to support compliance and quality assurance.
by Diarmuid O'Donovan, from the Community
Downloads: 0
Get
Template
Electrical Verification and Testing Checklist
A practical checklist based on AS NZ 3017 for electricians and inspectors to verify electrical installations. Covers safety preparation including test for dead, isolate, lock and tag, and visual inspection of mains, switchboards, wiring systems, equipment, and earthing. Includes procedures for continuity, insulation resistance, correct wiring and polarity, earth fault loop impedance, RCD tests, and commissioning records. Designed for construction and facilities teams to document compliance and ensure safe energisation.
by Matt Thompson, from the Community
Downloads: 0
Get
Template
Power Cable Check Sheet - Pre Energisation
Use this ITR-09 checklist to verify power cable condition and readiness before energisation. It covers visual inspection and tagging, correct type and size, terminations at source and destination, supports and glands, continuity and phasing tests, insulation resistance at 500V or 1000V, ductor measurements on bolted connections, and torque marks. Includes close-out items such as as-constructed drawings, fit-for-service confirmation, comments, license number, and sign-off.
by Diarmuid O'Donovan, from the Community
Downloads: 0
Get

Switch Board Post Energisation Check Sheet

This switchboard post energisation check sheet guides electricians through pre-commissioning and commissioning checks to ensure safe energisation. It covers visual inspection for damage, presence and condition of escutcheons and covers, protection against access to live parts, confirmation of wiring, and readiness for energisation. Technicians record meter details, measure voltages at the SPD, main circuit breakers, RCDs and small breakers, verify phase rotation, and confirm WP meter and live indicators. The checklist includes RCD make and model and trip tests, circuit breaker settings, fault loop impedance and prospective short circuit values by phase, grading with upstream protection, sealing settings, and final lockout or tagout notes before energising final circuits.

by Diarmuid O'Donovan, from the Community

Get

Template

Switchboard Check Sheet for Pre Energisation

Use this ITR-13 switchboard pre energisation check sheet to confirm an installation is safe and ready before power on. Record visual inspection findings, verify earthing and MEN link, check cable terminations and torque, confirm labeling and drawings, and document continuity, insulation resistance, phasing, and circuit breaker settings. Capture photos, add comments, and complete sign off with licence number and date. Ideal for electrical contractors and commissioning teams to support compliance and quality assurance.

by Diarmuid O'Donovan, from the Community

Get

Template

Electrical Verification and Testing Checklist

A practical checklist based on AS NZ 3017 for electricians and inspectors to verify electrical installations. Covers safety preparation including test for dead, isolate, lock and tag, and visual inspection of mains, switchboards, wiring systems, equipment, and earthing. Includes procedures for continuity, insulation resistance, correct wiring and polarity, earth fault loop impedance, RCD tests, and commissioning records. Designed for construction and facilities teams to document compliance and ensure safe energisation.

by Matt Thompson, from the Community

Get

Template

Power Cable Check Sheet - Pre Energisation

Use this ITR-09 checklist to verify power cable condition and readiness before energisation. It covers visual inspection and tagging, correct type and size, terminations at source and destination, supports and glands, continuity and phasing tests, insulation resistance at 500V or 1000V, ductor measurements on bolted connections, and torque marks. Includes close-out items such as as-constructed drawings, fit-for-service confirmation, comments, license number, and sign-off.

by Diarmuid O'Donovan, from the Community

Get

Device Energisation Check Sheet

About author

You might also like

Switch Board Post Energisation Check Sheet

Switchboard Check Sheet for Pre Energisation

Electrical Verification and Testing Checklist

Power Cable Check Sheet - Pre Energisation

You might also like

Switch Board Post Energisation Check Sheet

Switchboard Check Sheet for Pre Energisation

Electrical Verification and Testing Checklist

Power Cable Check Sheet - Pre Energisation