Template

Cavity Extraction Initial Inspection Report

by Steve Morgan, from the Community

30+

Use this cavity extraction initial inspection report to determine if a property is suitable for cavity insulation extraction. Record site and address details, property type, heating and age, and capture initial photographs of all elevations. Verify drilling patterns, thermascope use, vents and flues, eaves, cleanliness, and hole filling. Note water ingress, material ingress, structural breaches, external wall and roof condition, and moisture transfer by room. Include boroscope photos, list defects, overall findings, recommended actions, signatures, and any quotation details.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Post Extraction and Cavity Wall Survey
This template supports post extraction and cavity wall surveys for residential and commercial properties. Inspect structural and external conditions, finishes, guttering, and access. Capture heating type, flue and chimney details, and verify safety monitors. Conduct boroscope checks, assess wall ties, confirm insulation removal, fit cavity brushes, and make good extraction holes. Check and document vents, trickle vents, and ventilation requirements per PAS 2035. Perform internal inspections for damp, condensation, and loft ingress, with photos and measurements of cavity depths across elevations. Includes dynamic risk assessment and installation checks to ensure suitability for reinstallation and occupant safety.
by William Wright, from the Community
Downloads: 10+
Get
Template
Dyson Cavity Wall Extraction Report
Use this Dyson Cavity Wall Extraction Report to capture post-work details after cavity wall insulation extraction. Record client information, property type, construction and year built, fuel type, and cavity width. Verify full removal of material and debris, installation of cavity brushes, removal and sleeving of ventilators, and any additional vents fitted. Confirm combustion vent suitability and cleanliness before handover, and assess readiness for re-injection. Include comments for each step and collect auditor and customer signatures.
by Lauren Rimmer, from the Community
Downloads: 0
Get
Template
Pre-Extraction and Cavity Cleaning Survey
Use this structured survey to assess failed cavity wall insulation prior to extraction and cleaning. Record client and property details (type, age, floors, bedrooms, heating), external finishes and structural condition, internal damp and mould indicators, ventilation and fans, access needs, and remedial works. Capture cavity depths and omitted areas by elevation, add boroscope photos and drawings, and document materials present for removal. Include chimneys and flues locations, adjoining property status, risk controls, and a dynamic risk assessment and client declaration. Designed for Low Carbon Exchange Ltd and housing providers managing retrofit and insulation remediation.
by Sean Glossop, from the Community
Downloads: 10+
Get
Template
Cavity Wall Pre-extraction and Cleaning Survey
This pre-extraction and cavity cleaning survey template supports inspections of failed cavity wall insulation prior to removal. It captures client and property details, construction age and type, heating and secondary heat sources, external finishes and condition, and any remedial works required. Inspectors can document internal issues such as damp or mould, ventilation and mechanical fans, air vents needing sleeving, adjoining insulation, omitted areas, and average cavity depths. The form covers materials to be extracted (fibre, foam, rockwool, polystyrene bead, debris), elevation photos and boroscope checks, and summary findings with reasons for extraction. It also includes a dynamic risk assessment and client declaration to support safe, compliant operations.
by Sean Glossop, from the Community
Downloads: 0
Get

Post Extraction and Cavity Wall Survey

This template supports post extraction and cavity wall surveys for residential and commercial properties. Inspect structural and external conditions, finishes, guttering, and access. Capture heating type, flue and chimney details, and verify safety monitors. Conduct boroscope checks, assess wall ties, confirm insulation removal, fit cavity brushes, and make good extraction holes. Check and document vents, trickle vents, and ventilation requirements per PAS 2035. Perform internal inspections for damp, condensation, and loft ingress, with photos and measurements of cavity depths across elevations. Includes dynamic risk assessment and installation checks to ensure suitability for reinstallation and occupant safety.

by William Wright, from the Community

10+

Get

Template

Dyson Cavity Wall Extraction Report

Use this Dyson Cavity Wall Extraction Report to capture post-work details after cavity wall insulation extraction. Record client information, property type, construction and year built, fuel type, and cavity width. Verify full removal of material and debris, installation of cavity brushes, removal and sleeving of ventilators, and any additional vents fitted. Confirm combustion vent suitability and cleanliness before handover, and assess readiness for re-injection. Include comments for each step and collect auditor and customer signatures.

by Lauren Rimmer, from the Community

Get

Template

Pre-Extraction and Cavity Cleaning Survey

Use this structured survey to assess failed cavity wall insulation prior to extraction and cleaning. Record client and property details (type, age, floors, bedrooms, heating), external finishes and structural condition, internal damp and mould indicators, ventilation and fans, access needs, and remedial works. Capture cavity depths and omitted areas by elevation, add boroscope photos and drawings, and document materials present for removal. Include chimneys and flues locations, adjoining property status, risk controls, and a dynamic risk assessment and client declaration. Designed for Low Carbon Exchange Ltd and housing providers managing retrofit and insulation remediation.

by Sean Glossop, from the Community

10+

Get

Template

Cavity Wall Pre-extraction and Cleaning Survey

This pre-extraction and cavity cleaning survey template supports inspections of failed cavity wall insulation prior to removal. It captures client and property details, construction age and type, heating and secondary heat sources, external finishes and condition, and any remedial works required. Inspectors can document internal issues such as damp or mould, ventilation and mechanical fans, air vents needing sleeving, adjoining insulation, omitted areas, and average cavity depths. The form covers materials to be extracted (fibre, foam, rockwool, polystyrene bead, debris), elevation photos and boroscope checks, and summary findings with reasons for extraction. It also includes a dynamic risk assessment and client declaration to support safe, compliant operations.

by Sean Glossop, from the Community

Get

Cavity Extraction Initial Inspection Report

About author

You might also like

Post Extraction and Cavity Wall Survey

Dyson Cavity Wall Extraction Report

Pre-Extraction and Cavity Cleaning Survey

Cavity Wall Pre-extraction and Cleaning Survey

You might also like

Post Extraction and Cavity Wall Survey

Dyson Cavity Wall Extraction Report

Pre-Extraction and Cavity Cleaning Survey

Cavity Wall Pre-extraction and Cleaning Survey