Template

Post Extraction and Cavity Wall Survey PAS 2035

by Vinnie Stokes, from the Community

20+

Use this checklist to survey cavity walls after insulation extraction and assess suitability for reinstallation in line with PAS 2035. Capture site and property details, tenure and construction, external finishes and structural condition. Record heating appliances, flue and chimney locations, and verify alarms. Document access and equipment needs. Perform post extraction inspections with borescope images, check wall ties, cavity cleanliness, vents, and finish repairs. Include internal checks for damp and condensation, ventilation requirements, and loft inspection. Measure cavity depths by elevation and log photos. Complete a dynamic risk assessment and client declaration. Finalize with installation checks and signatures.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Post Extraction and Cavity Wall Survey
This template supports post extraction and cavity wall surveys for residential and commercial properties. Inspect structural and external conditions, finishes, guttering, and access. Capture heating type, flue and chimney details, and verify safety monitors. Conduct boroscope checks, assess wall ties, confirm insulation removal, fit cavity brushes, and make good extraction holes. Check and document vents, trickle vents, and ventilation requirements per PAS 2035. Perform internal inspections for damp, condensation, and loft ingress, with photos and measurements of cavity depths across elevations. Includes dynamic risk assessment and installation checks to ensure suitability for reinstallation and occupant safety.
by William Wright, from the Community
Downloads: 0
Get
Template
Post Extraction and Cavity Wall Survey Checklist
This template supports post extraction audits and cavity wall survey work for residential and commercial buildings. It captures address and tenure details, property type, age, and floor construction, then assesses exterior finishes and structural condition. It verifies heating appliances, flues, chimneys, ventilation, and safety monitors, and records internal inspections for damp, mould, and condensation. For cavity wall insulation, it documents scheme type, materials, vents, adjoining properties, and requirements under PAS 2035. It includes elevation photos, DPC measurements, cavity depth checks, borescope evidence, dynamic risk assessment, and installation checks to confirm readiness for reinstallation and compliance.
by Vinnie Stokes, from the Community
Downloads: 10+
Get
Template
PAS 2035-19 Cavity Wall Survey (Aug 2022)
Use this PAS 2035-19 cavity wall survey template to assess property suitability for cavity wall insulation and loft insulation. Capture building details, heating and ventilation, cavity depth, damp and condensation risks, required materials, access equipment, and PAS compliance checks, with photos, notes, and signatures.
by Mark Griffiths, from the Community
Downloads: 10+
Get
Template
PAS 2035-19 Cavity Wall Survey (July 2023)
This PAS 2035-19 cavity wall survey template helps assess a property’s suitability for cavity wall insulation. It guides surveyors to record building age and type, heating systems, flues and combustion vents, and to document ventilation, background vents, and extraction fans. Capture cavity areas, average cavity depth, omitted sections, adjoining property status, and evidence via photos, borescope images, and DPC checks across each elevation. The checklist includes site access needs, scaffolding or ladder requirements, and a dynamic risk assessment covering tools, electricity, working at height, and site conditions. It supports compliance questions aligned to PAS 2035 and building regulations, and provides sections for installation checks. An optional loft insulation survey covers insulation depth, materials, services, and safety considerations.
by Mark Griffiths, from the Community
Downloads: 10+
Get

Post Extraction and Cavity Wall Survey PAS 2035

About author

You might also like

Post Extraction and Cavity Wall Survey

Post Extraction and Cavity Wall Survey Checklist

PAS 2035-19 Cavity Wall Survey (Aug 2022)

PAS 2035-19 Cavity Wall Survey (July 2023)

You might also like

Post Extraction and Cavity Wall Survey

Post Extraction and Cavity Wall Survey Checklist

PAS 2035-19 Cavity Wall Survey (Aug 2022)

PAS 2035-19 Cavity Wall Survey (July 2023)