Template

Callan Construction Quality Inspection Checklist

by Aaron Martin, from the Community

Use this construction quality inspection checklist from Callan Construction to review setting out and openings, brickwork and blockwork, Keyfix non combustible cavity trays, insulation and brick tie channels, masonry support including torque checks and pull out tests, and fire and cavity barriers with Siderise components and non combustible DPCs from OBEX. Includes stonework checks, sections for notes and photos, and sign off by contractor and principal contractor to improve compliance and build quality.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Brickwork Quality Inspection Checklist (Level 1)
Use this Level 1 brickwork quality inspection to confirm setting out to current architectural drawings, check window and door openings for width, height and plumb, and verify coursing, perp joints and permitted tolerances. Inspect movement joints, cavity ties and brick reinforcement, and confirm lintel installation and bearing as specified. Verify Keyfix cavity trays and movement ties, weep vents, and insulation (Rainscreen Duo Slab) fit, spacing and continuity. Check brick tie channels, compression sleeves, and masonry support locations, bolt torque and pull-out testing. Confirm fire and cavity barriers (Siderise) are approved, correctly fixed, sealed and tightly abutted, with non-combustible DPC where required. Optional stonework checks included. Finish with cavity cleanliness, site tidiness, notes and sign-offs for Callan Construction and the principal contractor.
by Aaron Martin, from the Community
Downloads: 0
Get
Template
Brick and Blockwork Quality Assurance Checklist
Use this Brick and Blockwork Quality Assurance checklist to standardize masonry inspections on site. Capture photos of sample panels, verify setting out, alignment, and joint tolerances, and check brick slips, wall plates, padstones, and fire barriers. Confirm structural openings, cavity closers, lintels including prefabricated, air bricks and ventilation, DPC and cavity trays, weep holes, wall ties, cavity cleaning and insulation, and movement joints. Record mortar mix and color, protect facework, complete housekeeping, and sign off with approvals.
by Dan Bradstock, from the Community
Downloads: 10+
Get
Template
Brick and Blockwork Inspection Checklist
Use this brick and blockwork checklist to assess quality and safety on site. Review setting out and bond, line, level, plumb, and gauge. Confirm full joints and correct pointing, correct mortar mixes and batching, clean and correct cavity widths, proper location of ties, insulation, and DPCs. Verify openings and lintels, cavity trays, and protection of materials and completed work. Record mortar cube samples, check cleanliness of the face, and prepare the area for following trades. Adapt this template to your project requirements.
by Steve Hickey, from the Community
Downloads: 20+
Get
Template
Internal Blockwork Quality Inspection Checklist
This internal blockwork quality inspection checklist helps construction teams verify work against drawings and specifications. Use it to review setting out and opening dimensions, tolerances, movement joints, DPC installation, cavity wall ties, lintel bearing, insulation fit, windposts, and fire stop barriers. Capture compartment references, attach photo evidence, record notes, and complete sign-offs for contractor and principal contractor. Ideal for site QA to keep work compliant, tidy, and documented without delays.
by Aaron Martin, from the Community
Downloads: 0
Get

Brickwork Quality Inspection Checklist (Level 1)

Use this Level 1 brickwork quality inspection to confirm setting out to current architectural drawings, check window and door openings for width, height and plumb, and verify coursing, perp joints and permitted tolerances. Inspect movement joints, cavity ties and brick reinforcement, and confirm lintel installation and bearing as specified. Verify Keyfix cavity trays and movement ties, weep vents, and insulation (Rainscreen Duo Slab) fit, spacing and continuity. Check brick tie channels, compression sleeves, and masonry support locations, bolt torque and pull-out testing. Confirm fire and cavity barriers (Siderise) are approved, correctly fixed, sealed and tightly abutted, with non-combustible DPC where required. Optional stonework checks included. Finish with cavity cleanliness, site tidiness, notes and sign-offs for Callan Construction and the principal contractor.

by Aaron Martin, from the Community

Get

Template

Brick and Blockwork Quality Assurance Checklist

Use this Brick and Blockwork Quality Assurance checklist to standardize masonry inspections on site. Capture photos of sample panels, verify setting out, alignment, and joint tolerances, and check brick slips, wall plates, padstones, and fire barriers. Confirm structural openings, cavity closers, lintels including prefabricated, air bricks and ventilation, DPC and cavity trays, weep holes, wall ties, cavity cleaning and insulation, and movement joints. Record mortar mix and color, protect facework, complete housekeeping, and sign off with approvals.

by Dan Bradstock, from the Community

10+

Get

Template

Brick and Blockwork Inspection Checklist

Use this brick and blockwork checklist to assess quality and safety on site. Review setting out and bond, line, level, plumb, and gauge. Confirm full joints and correct pointing, correct mortar mixes and batching, clean and correct cavity widths, proper location of ties, insulation, and DPCs. Verify openings and lintels, cavity trays, and protection of materials and completed work. Record mortar cube samples, check cleanliness of the face, and prepare the area for following trades. Adapt this template to your project requirements.

by Steve Hickey, from the Community

20+

Get

Template

Internal Blockwork Quality Inspection Checklist

This internal blockwork quality inspection checklist helps construction teams verify work against drawings and specifications. Use it to review setting out and opening dimensions, tolerances, movement joints, DPC installation, cavity wall ties, lintel bearing, insulation fit, windposts, and fire stop barriers. Capture compartment references, attach photo evidence, record notes, and complete sign-offs for contractor and principal contractor. Ideal for site QA to keep work compliant, tidy, and documented without delays.

by Aaron Martin, from the Community

Get

Callan Construction Quality Inspection Checklist

About author

You might also like

Brickwork Quality Inspection Checklist (Level 1)

Brick and Blockwork Quality Assurance Checklist

Brick and Blockwork Inspection Checklist

Internal Blockwork Quality Inspection Checklist

You might also like

Brickwork Quality Inspection Checklist (Level 1)

Brick and Blockwork Quality Assurance Checklist

Brick and Blockwork Inspection Checklist

Internal Blockwork Quality Inspection Checklist