Template

Burbank Concrete Pump Checklist

by Chris Moore, from the Community

This checklist supports safe concrete pumping on residential and project sites. It covers access and egress, overhead services, traffic management, SWMS completion, operator certification, pre-start and maintenance logs, outrigger setup and ground conditions, PPE, hose safety slings, truck spotting, pedestrian protection, and washout planning. Use it to document conditions and compliance during site audits.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Pumping Safety Take 5 Pre-Start Checklist
This Take 5 pre-start checklist helps concrete pumping crews prepare for safe operations on site. Verify required PPE, confirm team competence and SWMS sign-on, and establish exclusion zones and clear communications. Inspect outrigger locations and ground conditions, check for overhead power and other hazards, and complete all pump prestart checks including connections, safety clips, hopper cover and emergency stop access. Agree on excess concrete and washout areas, then capture contractor sign off before commencing work.
by Ben Roberts, from the Community
Downloads: 20+
Get
Template
Concrete Pumping Safety Take 5 Pre-Start Checklist
This pre-start Take 5 checklist helps concrete pump operators and contractors verify site readiness and safety before work begins. It covers required PPE, worker competence and SWMS sign-on, exclusion zones to prevent crush hazards, clear communications with agi truck drivers, checks for underground services and public safety, operational warning devices, stable outrigger setup, and overhead powerline hazards. It includes prestart equipment checks, agreed washout and excess concrete areas, and contractor sign-off.
by Ben Roberts, from the Community
Downloads: 0
Get
Template
Concrete Pumping Checklist
This concrete pumping checklist helps site managers and concrete pump operators verify safe setup and operations. It covers operator competency verification (e.g., CPCS card), pump inspection certificates and maintenance records, selecting the correct pump, ensuring stable ground and spreader mats, and clearing proximity hazards like overhead cables and scaffolding. It also prompts for adequate lighting, correct concrete mix, appointing a banksman, and a person to monitor hopper levels. Operator checks include pipeline measurement and integrity, correct hose configuration per manufacturer instructions, and prohibiting blanking heads to move concrete in the line.
by Colin Handley, from the Community
Downloads: 0
Get
Template
Concrete Safety Manager Inspection Checklist (2020)
A comprehensive NYC DOB-aligned checklist for Concrete Safety Managers to plan and document general tasks and site safety on concrete projects. Review fall protection, lighting, ventilation, housekeeping, pre-storm planning, and concrete washout controls. Verify formwork drawings, competent inspections, guardrails, and signage; oversee reinforcement placement and special inspection sign-offs. Manage concrete placement with pumping pre-plans, equipment checks, signalmen, weather requirements, and rate controls. Monitor stripping and reshoring procedures, strength verification, bracing, and limits by floor. Ensure safe material handling, storage, and edge protection, and maintain logs for compliance.
by George Villalobos, from the Community
Downloads: 0
Get

Pumping Safety Take 5 Pre-Start Checklist

This Take 5 pre-start checklist helps concrete pumping crews prepare for safe operations on site. Verify required PPE, confirm team competence and SWMS sign-on, and establish exclusion zones and clear communications. Inspect outrigger locations and ground conditions, check for overhead power and other hazards, and complete all pump prestart checks including connections, safety clips, hopper cover and emergency stop access. Agree on excess concrete and washout areas, then capture contractor sign off before commencing work.

by Ben Roberts, from the Community

20+

Get

Template

Concrete Pumping Safety Take 5 Pre-Start Checklist

This pre-start Take 5 checklist helps concrete pump operators and contractors verify site readiness and safety before work begins. It covers required PPE, worker competence and SWMS sign-on, exclusion zones to prevent crush hazards, clear communications with agi truck drivers, checks for underground services and public safety, operational warning devices, stable outrigger setup, and overhead powerline hazards. It includes prestart equipment checks, agreed washout and excess concrete areas, and contractor sign-off.

by Ben Roberts, from the Community

Get

Template

Concrete Pumping Checklist

This concrete pumping checklist helps site managers and concrete pump operators verify safe setup and operations. It covers operator competency verification (e.g., CPCS card), pump inspection certificates and maintenance records, selecting the correct pump, ensuring stable ground and spreader mats, and clearing proximity hazards like overhead cables and scaffolding. It also prompts for adequate lighting, correct concrete mix, appointing a banksman, and a person to monitor hopper levels. Operator checks include pipeline measurement and integrity, correct hose configuration per manufacturer instructions, and prohibiting blanking heads to move concrete in the line.

by Colin Handley, from the Community

Get

Template

Concrete Safety Manager Inspection Checklist (2020)

A comprehensive NYC DOB-aligned checklist for Concrete Safety Managers to plan and document general tasks and site safety on concrete projects. Review fall protection, lighting, ventilation, housekeeping, pre-storm planning, and concrete washout controls. Verify formwork drawings, competent inspections, guardrails, and signage; oversee reinforcement placement and special inspection sign-offs. Manage concrete placement with pumping pre-plans, equipment checks, signalmen, weather requirements, and rate controls. Monitor stripping and reshoring procedures, strength verification, bracing, and limits by floor. Ensure safe material handling, storage, and edge protection, and maintain logs for compliance.

by George Villalobos, from the Community

Get

Burbank Concrete Pump Checklist

About author

You might also like

Pumping Safety Take 5 Pre-Start Checklist

Concrete Pumping Safety Take 5 Pre-Start Checklist

Concrete Pumping Checklist

Concrete Safety Manager Inspection Checklist (2020)

You might also like

Pumping Safety Take 5 Pre-Start Checklist

Concrete Pumping Safety Take 5 Pre-Start Checklist

Concrete Pumping Checklist

Concrete Safety Manager Inspection Checklist (2020)