Template

Astech Holdpoint Asbestos Removal Checklist

by Paul maidment, from the Community

This Astech Holdpoint checklist supports licensed asbestos removal by verifying readiness at critical hold points before works proceed. It covers plan of work quality and alignment to site conditions, staff and contractor briefings, access to required certifications, DCU setup and testing, access and egress routes, mandatory warning signage and barrier controls, equipment setup and checks, scaffold tagging, gas and electrical isolations, RPE checks and clean-shaven compliance, PPE use, daily inspection completion, enclosure smoke testing and certification, waste skip setup, vision panels or CCTV, flap deflections, NPU flow and pascal readings, and final approval to continue.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Asbestos Work Hold Point Checklist (AR044)
This AR044 asbestos work hold point checklist helps supervisors confirm that all prerequisites are met before licensed asbestos removal begins. It covers plan-of-work adequacy, briefings for staff and other contractors, availability of training and equipment certifications, DCU placement and functionality, access and egress routes, mandatory site board items, warning signage, and correct setup of access equipment. It also verifies gas/electrical isolation, RPE checks and clean-shaven policy, correct PPE, and completion of daily inspection points including enclosure, airlocks, NPUs, dust suppression, and monitoring. Use it to document photos, comments, and approvals to ensure compliance and a safe start.
by Mark Sarginson, from the Community
Downloads: 10+
Get
Template
Asbestos Works Hold Point Checklist
Use this hold point checklist to confirm all controls are in place before asbestos work starts. Verify plan of work matches site conditions; brief staff and other contractors; collect training, medical, equipment and license certificates; position and test the DCU; mark access, transit and waste routes; display required warning signage; set up access equipment with valid PASMA/IPAF/scaffold tags; confirm gas, power and lighting isolations; check RPE and PPE compliance; complete daily inspections; and record NPU anemometer readings. Capture photos of paperwork, signage, certificates, DCU and routes.
by Tony Church, from the Community
Downloads: 0
Get
Template
Non-Licensed Asbestos Removal Audit
This audit template helps supervisors and auditors review non-licensed asbestos removal activities. It covers admin checks such as policies, licenses, insurances, training and plant certifications; planning and setup including RAMS, work at height, isolations, DCU and enclosure requirements, NPU setup, and welfare; site operations covering vehicle standards, PPE and RPE usage, H-Vac controls, waste handling and area control; and an individual competence review across RPE, decontamination, negative pressure, van organization, removal and wetting techniques, and general health and safety. It also includes anonymous safety feedback and a summary of non-conformances to drive corrective actions.
by Barclay Haxell, from the Community
Downloads: 30+
Get
Template
Notifiable Works Site Audit Checklist for Asbestos
This notifiable works site audit form supports auditing of asbestos removal projects. It covers pre-audit checks (valid ASB5 and scope), ability to observe works, and confirmation that removal activities are in progress. The checklist reviews enclosure integrity, airlock and baglock standards, transit and waste routes, dust suppression and removal methods, PPE and RPE use, air management and NPU setup, DCU function and hygiene, waste storage security, and emergency arrangements. It also assesses controls for non-asbestos risks and COSHH, alignment with the Plan of Work, smoke testing, air and personal monitoring, management oversight, required certifications, licences, insurance, and worker medical, training and face-fit records.
by Sam Watts, from the Community
Downloads: 20+
Get

Astech Holdpoint Asbestos Removal Checklist

About author

You might also like

Asbestos Work Hold Point Checklist (AR044)

Asbestos Works Hold Point Checklist

Non-Licensed Asbestos Removal Audit

Notifiable Works Site Audit Checklist for Asbestos

You might also like

Asbestos Work Hold Point Checklist (AR044)

Asbestos Works Hold Point Checklist

Non-Licensed Asbestos Removal Audit

Notifiable Works Site Audit Checklist for Asbestos