Template

A2O Versaroc Quality Assurance Checklist

by Roman Fedenko, from the Community

This A2O Versaroc Quality Assurance checklist helps installers and site supervisors verify Versaroc wall board installation against project drawings and specifications. Confirm 12 mm boards, correct fixings to SFS at 600 mm horizontal and 300 mm vertical centres, 3-6 mm board joints, and proper sealing with Versaseal and Versatape. Capture photos, add actions, assign responsibility, and complete sign-off with installer, A2O, and client signatures.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
A2O Versapanel Board Quality Assurance
Use this checklist to verify compliant installation of A2O Versapanel boards. Confirm 10 mm board as per drawings, check fixing centers at 600 mm horizontal, 300 mm vertical on board edges and 600 mm vertical in the center, with fixings at least 40 mm down and 15 mm in from edges. Leave a 3 to 6 mm gap and seal joints with versasealer. Provide 25 mm movement joints at slab level. Add photos, notes, and corrective actions, capture installer, contractor, and client signatures, and export the report.
by William Carter, from the Community
Downloads: 0
Get
Template
A2O Y Wall Board Quality Assurance Checklist
This A2O Y wall board quality assurance checklist helps site teams verify 12mm Y wall board installation on steel framing systems. It covers correct board specification, fixing patterns at 600mm horizontally and 300mm vertically, sealing of joints with RCM UV DAFA tape, and leaving movement joints at slab level. The template supports photos, notes, actions with assignees and due dates, and collects installer, contractor, and client signatures for completion. Export reports as PDF, Word, Excel, or web link.
by William Carter, from the Community
Downloads: 0
Get
Template
A2O Versapanel Quality Assurance Checklist
This A2O Versapanel quality assurance checklist guides installers and inspectors through key checks for SFS sheathing installation. Verify 12mm boards, fixing spacing to manufacturer guidance, 3-6 mm board joints, movement joints at slab level, continuous versatape on joints, and that SFS deflection is not compromised. Record notes and photos, raise corrective actions with assignees and due dates, capture digital signatures, and export a professional report.
by William Carter, from the Community
Downloads: 0
Get
Template
Y-Wall Board Quality Assurance Checklist
Ensure correct installation of Y-Wall sheathing boards with a focused QA checklist. Verify screw edge distances of 12 to 15 mm around perimeters, fixing spacing no greater than 300 mm vertically and 600 mm horizontally, and corner fixings 50 mm from edges. Confirm application of fire rated sealant and tape to all board edges, maintain 2 to 5 mm gaps between boards, and seal any additional penetrations. Capture site details, inspector, date, and complete A2O representative sign off. Designed to support consistent on site quality checks; always confirm requirements against the latest fixing schedule and project specifications.
by Aurelijus Juodelis, from the Community
Downloads: 0
Get

A2O Versapanel Board Quality Assurance

Use this checklist to verify compliant installation of A2O Versapanel boards. Confirm 10 mm board as per drawings, check fixing centers at 600 mm horizontal, 300 mm vertical on board edges and 600 mm vertical in the center, with fixings at least 40 mm down and 15 mm in from edges. Leave a 3 to 6 mm gap and seal joints with versasealer. Provide 25 mm movement joints at slab level. Add photos, notes, and corrective actions, capture installer, contractor, and client signatures, and export the report.

by William Carter, from the Community

Get

Template

A2O Y Wall Board Quality Assurance Checklist

This A2O Y wall board quality assurance checklist helps site teams verify 12mm Y wall board installation on steel framing systems. It covers correct board specification, fixing patterns at 600mm horizontally and 300mm vertically, sealing of joints with RCM UV DAFA tape, and leaving movement joints at slab level. The template supports photos, notes, actions with assignees and due dates, and collects installer, contractor, and client signatures for completion. Export reports as PDF, Word, Excel, or web link.

by William Carter, from the Community

Get

Template

A2O Versapanel Quality Assurance Checklist

This A2O Versapanel quality assurance checklist guides installers and inspectors through key checks for SFS sheathing installation. Verify 12mm boards, fixing spacing to manufacturer guidance, 3-6 mm board joints, movement joints at slab level, continuous versatape on joints, and that SFS deflection is not compromised. Record notes and photos, raise corrective actions with assignees and due dates, capture digital signatures, and export a professional report.

by William Carter, from the Community

Get

Template

Y-Wall Board Quality Assurance Checklist

Ensure correct installation of Y-Wall sheathing boards with a focused QA checklist. Verify screw edge distances of 12 to 15 mm around perimeters, fixing spacing no greater than 300 mm vertically and 600 mm horizontally, and corner fixings 50 mm from edges. Confirm application of fire rated sealant and tape to all board edges, maintain 2 to 5 mm gaps between boards, and seal any additional penetrations. Capture site details, inspector, date, and complete A2O representative sign off. Designed to support consistent on site quality checks; always confirm requirements against the latest fixing schedule and project specifications.

by Aurelijus Juodelis, from the Community

Get

A2O Versaroc Quality Assurance Checklist

About author

You might also like

A2O Versapanel Board Quality Assurance

A2O Y Wall Board Quality Assurance Checklist

A2O Versapanel Quality Assurance Checklist

Y-Wall Board Quality Assurance Checklist

You might also like

A2O Versapanel Board Quality Assurance

A2O Y Wall Board Quality Assurance Checklist

A2O Versapanel Quality Assurance Checklist

Y-Wall Board Quality Assurance Checklist