Template

QUAL 002 - UL Storage Locations

by Steve Kendrick, from the Community

Use this QUAL 002 checklist to assess UL storage locations and drive consistent warehouse quality. Verify SOP and QMS Matrix access, document control and review dates, FOD awareness and signage, FIFO use, housekeeping and footprinting, racking condition and inspections, FLT LOLER and pre-use checks, pump truck and ladder inspections, PAT testing, NAC controls and tracker use, bonded store status, returns handling, and correct Unipart signage.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
QUAL 001 UL Inbound Locations
This checklist supports quality and safety checks for inbound storage locations at Unipart Logistics. It guides teams to confirm safe stacking and damage free goods awaiting receipt, the presence and accessibility of up to date SOPs and work instructions on the QMS Matrix, and alignment with referenced Airbus documents. Items include verification of UL quality stamps and commitment letters, document control and review dates, and employee sign off. Compliance checks cover FOD awareness and signage, housekeeping, bonded areas, foot printing, returns from production, and correct Unipart branding. Equipment and infrastructure checks include pump trucks, FLTs with valid LOLER certification and pre use inspections, ladders and steps condition and inspection dates, PAT testing, racking inspections, damage, and clear location signage. Training verification spans manual handling, pump truck, MHE, DSE assessments, and safety knife training.
by Steve Kendrick, from the Community
Downloads: 0
Get
Template
Operational Team QSHE Process Confirmation
Use this QSHE process confirmation checklist to assess logistics storage locations. It covers quality processes (SOP and WI access via QMS Matrix, document control, Airbus references), quality compliance (bonded store controls, FOD standards, no metal-on-metal, housekeeping, racking inspections and damage checks, returns handling, signage and stacking), health and safety (fire marshals, exits, signage, firefighting equipment and inspections, first aid readiness, pallet storage, pump truck and step ladder checks, MHE pre-use records, PAT testing), and environmental practices (waste segregation, litter control, reuse and recycling, noise and vibration). Designed for operational management teams to verify compliance across warehouse zones.
by Steve Kendrick, from the Community
Downloads: 0
Get
Template
General Warehouse and Office Safety Inspection
Use this comprehensive warehouse and office safety inspection checklist to evaluate access and egress, fire prevention, general and emergency lighting, building and walkway safety, housekeeping and waste management, staff training and awareness, racking and storage design, forklift and plant operations, electrical safety, ladder condition and inspections, first aid equipment and signage, welfare facilities, and any additional concerns. Capture dates, locations, responsible persons, and follow-up actions to drive compliance, reduce incidents, and maintain a safe, efficient workplace.
by Shaun Jones, from the Community
Downloads: 10+
Get
Template
Warehouse Health and Safety Compliance Audit
Use this warehouse health and safety and compliance audit checklist to evaluate risks and verify operational compliance across your site. Review fire safety systems and signage, emergency plans and evacuation drills, first aid resources, and weekly checks. Inspect racking for damage, load signage, pins and floor bolts, and ensure safe loading and housekeeping in aisles and docks. Verify forklift and material handling equipment certification, daily and weekly equipment checks, and staff induction and manual handling training. Assess building security including CCTV, access control, visitor logging, alarms, and lighting. Confirm electrical and statutory testing such as PAT, fixed wire testing, thermal imaging, and LOLER inspections. Check spill kits, waste and WEEE storage, yard tidiness, permits to work, fall protection and pallet gates, and record keeping for audits and corrective actions.
by Anis Elaidouni, from the Community
Downloads: 0
Get

QUAL 001 UL Inbound Locations

This checklist supports quality and safety checks for inbound storage locations at Unipart Logistics. It guides teams to confirm safe stacking and damage free goods awaiting receipt, the presence and accessibility of up to date SOPs and work instructions on the QMS Matrix, and alignment with referenced Airbus documents. Items include verification of UL quality stamps and commitment letters, document control and review dates, and employee sign off. Compliance checks cover FOD awareness and signage, housekeeping, bonded areas, foot printing, returns from production, and correct Unipart branding. Equipment and infrastructure checks include pump trucks, FLTs with valid LOLER certification and pre use inspections, ladders and steps condition and inspection dates, PAT testing, racking inspections, damage, and clear location signage. Training verification spans manual handling, pump truck, MHE, DSE assessments, and safety knife training.

by Steve Kendrick, from the Community

Get

Template

Operational Team QSHE Process Confirmation

Use this QSHE process confirmation checklist to assess logistics storage locations. It covers quality processes (SOP and WI access via QMS Matrix, document control, Airbus references), quality compliance (bonded store controls, FOD standards, no metal-on-metal, housekeeping, racking inspections and damage checks, returns handling, signage and stacking), health and safety (fire marshals, exits, signage, firefighting equipment and inspections, first aid readiness, pallet storage, pump truck and step ladder checks, MHE pre-use records, PAT testing), and environmental practices (waste segregation, litter control, reuse and recycling, noise and vibration). Designed for operational management teams to verify compliance across warehouse zones.

by Steve Kendrick, from the Community

Get

Template

General Warehouse and Office Safety Inspection

Use this comprehensive warehouse and office safety inspection checklist to evaluate access and egress, fire prevention, general and emergency lighting, building and walkway safety, housekeeping and waste management, staff training and awareness, racking and storage design, forklift and plant operations, electrical safety, ladder condition and inspections, first aid equipment and signage, welfare facilities, and any additional concerns. Capture dates, locations, responsible persons, and follow-up actions to drive compliance, reduce incidents, and maintain a safe, efficient workplace.

by Shaun Jones, from the Community

10+

Get

Template

Warehouse Health and Safety Compliance Audit

Use this warehouse health and safety and compliance audit checklist to evaluate risks and verify operational compliance across your site. Review fire safety systems and signage, emergency plans and evacuation drills, first aid resources, and weekly checks. Inspect racking for damage, load signage, pins and floor bolts, and ensure safe loading and housekeeping in aisles and docks. Verify forklift and material handling equipment certification, daily and weekly equipment checks, and staff induction and manual handling training. Assess building security including CCTV, access control, visitor logging, alarms, and lighting. Confirm electrical and statutory testing such as PAT, fixed wire testing, thermal imaging, and LOLER inspections. Check spill kits, waste and WEEE storage, yard tidiness, permits to work, fall protection and pallet gates, and record keeping for audits and corrective actions.

by Anis Elaidouni, from the Community

Get

QUAL 002 - UL Storage Locations

About author

You might also like

QUAL 001 UL Inbound Locations

Operational Team QSHE Process Confirmation

General Warehouse and Office Safety Inspection

Warehouse Health and Safety Compliance Audit

You might also like

QUAL 001 UL Inbound Locations

Operational Team QSHE Process Confirmation

General Warehouse and Office Safety Inspection

Warehouse Health and Safety Compliance Audit