Template

A1 Health and Safety Site Audit Checklist

by Mohsin Mehmood, from the Community

Use this A1 Health and Safety Site Audit Checklist to assess telecom and rooftop work. Cover documentation and procedures including IDs, booking, permits, RAMS, inductions, lone working, and safety bulletins. Verify training validity, tools and PPE checks such as calibration, first aid, ladders, hearing and eye protection, and gloves. Review general site safety for asbestos, traffic management, signage, waste handling, access, and electrical isolation. Address working at height and lifting controls including RF monitors, rescue plans, fall arrest equipment, exclusion zones, communication, appointed persons, slinger or signaller roles, LOLER records, and checks for MEWP, HIAB and cranes, plus emergency lowering. Capture time stamped photos and record auditor recommendations.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
A1 Site Audit Checklist
This A1 Site Audit Checklist supports telecom field teams in evaluating site safety and compliance against industry and client requirements. It covers documentation and procedures, inductions, RAMS, lone worker systems, PPE and equipment checks, general site safety, RF control measures, and working at height and LOLER standards. The checklist outlines pass and fail scoring, corrective actions, and guidance for permits, rescue planning, barriers and signage, and safe access. Use it to standardize audits, capture evidence, and drive corrective actions across rooftop and similar telecom sites.
by Mohsin Mehmood, from the Community
Downloads: 0
Get
Template
Health Safety and Environment Inspection Checklist
This Health Safety and Environment inspection checklist is designed for telecom and construction site audits. It guides field teams through work environment checks such as housekeeping, access routes, segregation of plant and pedestrians, site security and spill response. It covers welfare and emergency arrangements, personnel competence and training, and verification of documentation including RAMS, traffic management and asbestos plans. Detailed sections address lifting operations with cranes and MEWPs, excavation controls, working at height with fall protection and rescue, scaffolding inspections, electrical safety including isolation and testing, and environmental compliance around waste, fuel storage and generators.
by Neil Haycroft, from the Community
Downloads: 0
Get
Template
Construction Site Safety Audit Checklist
This construction site safety audit checklist helps site managers and inspectors assess compliance across critical areas including access and egress, scaffolding and access equipment, asbestos management, confined spaces and lone working, COSHH, demolition operations, edge protection, electrical safety, environmental management, excavations and earthworks, fall arrest and safety netting, fire risk management, first aid readiness, housekeeping, health and safety plans, inductions and sign-in, lifting operations and equipment, low-level access, manual handling, mobile towers, occupational health and HAVS, PPE availability and registers, plant and equipment, registers and records, RAMS for all trades and activities, protection of the public, scaffolding and working platforms, site security and CCTV, site setup and statutory signage, specialist operations, storage of substances and fuels, temporary works to BS5975, traffic management and pedestrian segregation, training and certifications, waste management, welfare facilities, working at height, site H and S file, cleanliness, lighting, and accident and near-miss recording.
by Kevin Mullarkey, from the Community
Downloads: 0
Get
Template
Job Site Inspection Checklist - UK HSE
Use this job site inspection checklist to run thorough HSE audits on UK construction sites. Cover management controls, access and egress, site setup, asbestos and confined spaces, hazard communication and SDS, housekeeping, dust and noise controls, lighting, and waste removal. Verify electrical equipment and PAT checks, fire and emergency procedures, first aid readiness, cranes and lifting gear, and mobile equipment. Assess PPE compliance including helmets, eye, hand, foot, and hearing protection. Review tools, scaffolding, and working at height controls, fall protection plans, ladders, and record inspections. Capture corrective actions and sign off.
by Samantha Frazier, from the Community
Downloads: 0
Get

A1 Health and Safety Site Audit Checklist

About author

You might also like

A1 Site Audit Checklist

Health Safety and Environment Inspection Checklist

Construction Site Safety Audit Checklist

Job Site Inspection Checklist - UK HSE

You might also like

A1 Site Audit Checklist

Health Safety and Environment Inspection Checklist

Construction Site Safety Audit Checklist

Job Site Inspection Checklist - UK HSE