Template

Fire Door Inspection Checklist - Block C

by Mauricio Silva, from the Community

This 6-monthly fire door inspection checklist for Block C helps facilities and property teams verify critical safety elements. Record door IDs and assess each door for surface and edge damage, a valid certification label, correctly fitted hinges with all screws, and properly functioning handles. Confirm master or spare key availability and validate lock or mag-lock operation. Measure perimeter gaps to ensure they are no greater than 4 mm. Test that the door closes securely using only the momentum of the closer. Check intumescent strips, smoke seals, and any threshold drop seals for presence and condition. Capture observations, inspector details, and sign-off to maintain compliance and building safety.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Fire Door Inspection Units – Block D
This fire door inspection template supports 6‑monthly checks for Units in Block D. Inspectors can identify each door by ID, assess for damage, verify certification labels, check hinges, handles, locks and mag-locks, confirm gap tolerances under 4 mm, and test that the door closes securely on the closer. The checklist also covers intumescent strips, smoke seals and threshold drop seals, with sections for observations, inspector details and sign-off to help maintain compliance and building fire safety.
by Mauricio Silva, from the Community
Downloads: 0
Get
Template
Fire Door Inspection - Communal Block B
Perform a thorough fire door inspection for communal areas in Block B on a 6-month schedule. This template guides checks for door damage, certification labels, correct hinge installation, handle and panic bar function, key availability, lock or mag-lock operation, compliant gaps under 4mm, and any vision panel damage. Confirm the door self-closes securely using the closer’s momentum and verify intumescent strips, smoke seals, and threshold drop seals are intact. Record observations and complete inspector sign-off to support compliance and safety.
by Mauricio Silva, from the Community
Downloads: 0
Get
Template
Fire Door Inspection Checklist - Block B
Use this six-monthly fire door inspection checklist for Block B to verify compliance and document the condition of each unit. Record door IDs, check for damage to faces and edges, confirm certification labels, measure clearances under 4 mm, test hinges, handles, locks and mag-locks, and confirm the door closes securely on the closer alone. Inspect intumescent strips, smoke and threshold drop seals, glazing and signage, and note observations and defects. Capture inspector details, date, and signature, and assign corrective actions to maintain life safety and regulatory compliance.
by Mauricio Silva, from the Community
Downloads: 0
Get
Template
Fire Door Inspection – Communal Block A
This fire door inspection checklist supports 6‑monthly assessments for communal areas in residential or commercial buildings. It guides inspectors to check for visible door damage, certification labels, correct hinge installation and screws, functional handles or panic bars, availability of master/spare keys, proper lock or mag-lock operation, compliant perimeter gaps under 4 mm, intact and clear vision panels, reliable self-closing using the door closer’s momentum, and intact intumescent strips, smoke seals, and threshold drop seals. The template includes sections for observations, inspector details, dates, and signatures to document compliance and follow-up actions, helping maintain building safety and fire compartmentation.
by Mauricio Silva, from the Community
Downloads: 10+
Get

Fire Door Inspection Checklist - Block C

About author

You might also like

Fire Door Inspection Units – Block D

Fire Door Inspection - Communal Block B

Fire Door Inspection Checklist - Block B

Fire Door Inspection – Communal Block A

You might also like

Fire Door Inspection Units – Block D

Fire Door Inspection - Communal Block B

Fire Door Inspection Checklist - Block B

Fire Door Inspection – Communal Block A