Template

DoC Water Fixture Property Audit V1.0

by Geoff Cook, from the Community

10+

This DoC Water Fixture Property Audit checklist helps inspectors assess residential or facility plumbing and water systems. Record property details and PPE, confirm access, and document water meter location, clearance, and pressure limiting valves. Measure supply pressure and flow rates at taps, showers, baths, basins, kitchens, laundries, and hose cocks. Capture images of fixtures, cistern and pan types, and isolation valves. Audit hot water systems and relief valves, note remedial works, and attach evidence. Use this structured template to ensure consistent inspections and plan maintenance or compliance actions.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Water Fixture Property Audit Checklist V3.2
Use this water fixture property audit checklist to assess water meters, taps, showers, basins, baths, toilets, kitchens, laundries, hose cocks, and hot water systems across a property. Inspect meter clearance and pressure limiting valves, check supply pressure with a gauge, measure fixture flow rates with a flow cup, and capture photos of tapware, outlets, and installations. Record cistern, pan and seat types, verify isolation valves and relief valves, note room details and surrounding ground conditions, and log P1 or P2 remedial works. Finish with signatures for accountability.
by Geoff Cook, from the Community
Downloads: 10+
Get
Template
Water Fixture Property Audit V3.0 Checklist
This Water Fixture Property Audit V3.0 template guides inspectors through a comprehensive assessment of residential or facility water systems. Record property details, confirm PPE compliance, and document water meter location and clearance. Test supply pressure at the front tap, capture images, and log flow rates for showers, basins, baths, kitchen sinks, and laundry troughs. Inspect toilets to note cistern and pan types, isolation valves, and accessibility considerations. Review hot water system type and capacity, verify relief valves, and attach supporting photos. Identify P1 and P2 issues, list required remedial works, and note actions taken. Conclude with signatures to create a complete, compliant record for property and facilities management teams.
by Geoff Cook, from the Community
Downloads: 0
Get
Template
Water Fixture Property Audit V1.0
Use this comprehensive water fixture property audit to assess residential water systems and fixtures. Inspect the water meter assembly, front and rear taps, bathrooms, ensuite, kitchen, laundry, toilets, and hot water systems. Record water pressure and flow rates, verify relief valves, note remedial works, and capture photos for evidence. Includes PPE check, access guidance, and structured sections for actions and signatures.
by Geoff Cook, from the Community
Downloads: 10+
Get
Template
Water Fixture Property Audit Checklist
Use this water fixture property audit checklist to assess plumbing fixtures and water systems throughout a property. Verify meter location and clearance, confirm presence of a pressure limiting valve, and test supply pressure at the front tap. Capture flow rates for showers, basins, baths, kitchen sinks, and laundry troughs using a flow cup or measuring jug. Document cistern and pan types, isolation valves, and room details. Inspect hot water system type and capacity, and check relief valves. Include rear hose tap condition, note required P1/P2 remedial works with images and SORs, and record actions taken. Begin with a Take 5 safety check and finish with sign-off and photos to support maintenance and compliance planning.
by Geoff Cook, from the Community
Downloads: 0
Get

DoC Water Fixture Property Audit V1.0

About author

You might also like

Water Fixture Property Audit Checklist V3.2

Water Fixture Property Audit V3.0 Checklist

Water Fixture Property Audit V1.0

Water Fixture Property Audit Checklist

You might also like

Water Fixture Property Audit Checklist V3.2

Water Fixture Property Audit V3.0 Checklist

Water Fixture Property Audit V1.0

Water Fixture Property Audit Checklist