Template

District 3 Facility Inspection Checklist

by Rachel Nir, from the Community

10+

This District 3 Facility Inspection checklist helps facility managers assess safety and compliance across buildings and work areas. It covers employer postings and recordkeeping, medical services and first aid, general work area conditions, storage and housekeeping, toilets and washing facilities, suspended ceiling tiles, bay doors, battery charging, portable and fixed ladders, elevated locations, fire protection and evacuation planning, exits and egress, electrical safety and lockout procedures, personal protective equipment, eyewash and showers, respiratory protection, air compressors, tools and machinery guarding, grinders and saws, hoists, automotive lifts and jacks, ventilation controls, hazardous materials and flammable liquids storage, compressed gas cylinders, welding and cutting, forklifts, confined spaces, tire service, exterior structures, sand houses, and off site facilities. It is designed to support routine audits and corrective actions to maintain workplace safety and compliance.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
D2 Facility Inspection Checklist
Conduct a comprehensive facility safety audit with the D2 Facility Inspection checklist. Review employer postings and recordkeeping, medical services, fire protection systems and extinguishers, emergency egress, and general housekeeping. Verify PPE and respirator programs, electrical safety, flammable liquid storage, ladders, tools, hoists and lifts, air compressors, and forklifts. Cover special operations including compressed gas, welding, and tire repair. Assess lockout procedures, confined spaces, hazardous materials training and labeling, ventilation controls, and any offsite sandhouse. Document deficiencies and corrective actions for compliance.
by D2 Safety, from the Community
Downloads: 0
Get
Template
OSHA Compliance Inspection Checklist
Use this OSHA inspection checklist to assess compliance across general industry and construction requirements. Sections include employer postings, recordkeeping, safety and health programs, first aid and eyewash, fire protection and sprinklers, PPE selection and training, housekeeping and walking-working surfaces, egress and exit signage, portable ladders, hand and power tools, grinders, machine guarding, lockout tagout, welding and cutting, compressed gas cylinders, hoists and forklifts, confined spaces, hazard communication, and electrical safety. Ideal for safety managers conducting routine audits to meet 29 CFR 1910 and applicable 1926 standards.
by Morgan Tanner, from the Community
Downloads: 50+
Get
Template
Employer Advantage Client Inspection Checklist
This Employer Advantage client inspection is an initial OSHA compliance assessment covering workplace postings, recordkeeping, safety programs, medical and first aid, fire protection, PPE, general work environment, walkways and floor openings, stairs and elevated surfaces, egress and exit doors, ladders and tools, machine guarding and lockout/tagout, welding and cutting, compressors and compressed gas cylinders, hoists and forklifts, spraying operations, confined spaces, environmental controls, flammable and combustible materials, hazardous chemical exposure and communication, electrical safety, noise, fueling, piping identification, materials handling and transport, ventilation controls, sanitizing equipment and clothing, and tire inflation. It helps identify gaps and actions to meet OSHA standards.
by Robert Vice, from the Community
Downloads: 10+
Get
Template
Annual OSHA Self-Inspection Checklist
This annual OSHA self-inspection checklist helps safety managers audit key compliance areas across a facility. Sections cover employer postings, recordkeeping, safety programs, medical and first aid, fire protection, PPE, general housekeeping, walkways, floor and wall openings, stairs, elevated surfaces, egress and exit doors, ladders, hand and power tools, machine guarding, lockout tagout, welding and cutting, compressors and compressed air, gas cylinders, hoists, forklifts, spraying operations, confined spaces, environmental controls, flammable and combustible materials, hazardous chemical exposure, hazard communication, electrical safety, noise, fueling, piping identification, materials handling, transportation, ventilation, sanitizing equipment and clothing, and tire inflation.
by Leonardo Rada, from the Community
Downloads: 20+
Get

District 3 Facility Inspection Checklist

About author

You might also like

D2 Facility Inspection Checklist

OSHA Compliance Inspection Checklist

Employer Advantage Client Inspection Checklist

Annual OSHA Self-Inspection Checklist

You might also like

D2 Facility Inspection Checklist

OSHA Compliance Inspection Checklist

Employer Advantage Client Inspection Checklist

Annual OSHA Self-Inspection Checklist