Template

Underground Drill Bay Daily Operations Checklist

by Nyamjav Terbish, from the Community

This daily underground drill bay checklist helps crews verify critical safety and operational controls before and during work. Sections cover pre-start hazard identification, ventilation and lighting checks, ground support stability, housekeeping, well pump functionality, drilling flow control manifold inspections, sump pump operation and cleaning, and final defect reporting to supervisors. Use it to standardize underground operations and maintain safety compliance.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Underground Drill Bay Mechanical Inspection Checklist
This step-by-step SWI guides mechanics through planned 4-week mechanical inspections of underground drill bays in about 1 hour. It covers pre-start isolation, PPE, and hazard controls; ventilation and lighting checks; ground support and safety signage; fire extinguisher verification; well pump functionality for 480V and 240V panels; flow measurement and manifold testing; visual inspections of pumps, hoses, gauges, and chains; sump pump checks and cleaning; and task completion, cleanup, reinstallation, and reporting.
by Nyamjav Terbish, from the Community
Downloads: 0
Get
Template
Underground Drill Bay Electrical Inspection SWI
Use this standard work instruction to guide a comprehensive underground drill bay electrical inspection. The procedure covers pre-start preparations, hazard identification, and isolation, followed by ventilation and lighting checks, ground support assessment, housekeeping and signage verification. Inspect junction boxes, pump, fan and well pump control panels for damage, labeling, arc flash warnings, locks, moisture and corrosion. Review GEM sensor term boxes and remote I O panels. Confirm fire extinguishers are present and in service. On completion, clean the area, return tools and parts, notify the underground supervisor, and report or record any defects and repairs.
by Nyamjav Terbish, from the Community
Downloads: 0
Get
Template
Underground Pump Station Daily Checklist
Use this daily underground pump station checklist for underground mining operations. Verify pre-start preparations and hazard controls, inspect general housekeeping, assess pump functionality including HMI parameters, alarms, leaks, noise, and vibration, and check valves and pipes. Inspect tanks and level detectors for damage and leaks, review electrical panels and cables for moisture or faults, and record defects for supervisor follow-up. Capture signatures and comments to document compliance and improve safety and reliability.
by Nyamjav Terbish, from the Community
Downloads: 0
Get
Template
Underground Mining Inspection Form
This underground mining inspection form helps supervisors assess critical safety conditions before and during underground operations. Sections cover surface fans, portal entrance standards, signage, lighting, and housekeeping. Use it to document findings, record personnel and location details, assign corrective actions, and demonstrate compliance with site procedures and regulations. Adapt the checklist to your mine’s layout and operational requirements.
by Hendrikus Engelbrecht, from the Community
Downloads: 30+
Get

Underground Drill Bay Mechanical Inspection Checklist

This step-by-step SWI guides mechanics through planned 4-week mechanical inspections of underground drill bays in about 1 hour. It covers pre-start isolation, PPE, and hazard controls; ventilation and lighting checks; ground support and safety signage; fire extinguisher verification; well pump functionality for 480V and 240V panels; flow measurement and manifold testing; visual inspections of pumps, hoses, gauges, and chains; sump pump checks and cleaning; and task completion, cleanup, reinstallation, and reporting.

by Nyamjav Terbish, from the Community

Get

Template

Underground Drill Bay Electrical Inspection SWI

Use this standard work instruction to guide a comprehensive underground drill bay electrical inspection. The procedure covers pre-start preparations, hazard identification, and isolation, followed by ventilation and lighting checks, ground support assessment, housekeeping and signage verification. Inspect junction boxes, pump, fan and well pump control panels for damage, labeling, arc flash warnings, locks, moisture and corrosion. Review GEM sensor term boxes and remote I O panels. Confirm fire extinguishers are present and in service. On completion, clean the area, return tools and parts, notify the underground supervisor, and report or record any defects and repairs.

by Nyamjav Terbish, from the Community

Get

Template

Underground Pump Station Daily Checklist

Use this daily underground pump station checklist for underground mining operations. Verify pre-start preparations and hazard controls, inspect general housekeeping, assess pump functionality including HMI parameters, alarms, leaks, noise, and vibration, and check valves and pipes. Inspect tanks and level detectors for damage and leaks, review electrical panels and cables for moisture or faults, and record defects for supervisor follow-up. Capture signatures and comments to document compliance and improve safety and reliability.

by Nyamjav Terbish, from the Community

Get

Template

Underground Mining Inspection Form

This underground mining inspection form helps supervisors assess critical safety conditions before and during underground operations. Sections cover surface fans, portal entrance standards, signage, lighting, and housekeeping. Use it to document findings, record personnel and location details, assign corrective actions, and demonstrate compliance with site procedures and regulations. Adapt the checklist to your mine’s layout and operational requirements.

by Hendrikus Engelbrecht, from the Community

30+

Get

Underground Drill Bay Daily Operations Checklist

About author

You might also like

Underground Drill Bay Mechanical Inspection Checklist

Underground Drill Bay Electrical Inspection SWI

Underground Pump Station Daily Checklist

Underground Mining Inspection Form

You might also like

Underground Drill Bay Mechanical Inspection Checklist

Underground Drill Bay Electrical Inspection SWI

Underground Pump Station Daily Checklist

Underground Mining Inspection Form