Template

Underground 4 Week Air Compressor Inspection

by Nyamjav Terbish, from the Community

This step by step standard work instruction guides a planned monthly offline visual inspection of underground 4590 portal air compressors. It covers pre start preparations, isolation and lock out tag out, daily checks such as leaks, hose wear, filters, fasteners, coolant and drain valve. You will record pressure, capacity, running hours and temperature, respond to controller warnings by replacing filters and separator, and complete cleanup and handover to the supervisor, with defects and improvements noted.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Underground Air Door Mechanical Inspection 4 Week
This safe work instruction outlines a planned offline mechanical inspection for underground air doors used in mining operations. It details qualifications, required equipment, critical safety controls, pre start preparations, isolation and lockout procedures, door inspection and maintenance tasks including visual checks, fasteners, cables, lubrication and chain tension review, and final task completion and documentation. The scope applies to underground power machine doors at Kennecott Underground with an estimated duration of two hours and ownership under the asset management team.
by Nyamjav Terbish, from the Community
Downloads: 0
Get
Template
Underground Pump Station Agitator Inspection (4-Week)
Use this SWI-based template to perform a scheduled 4-week visual inspection of underground pump station agitators. It covers pre-start preparation and C1 isolation, required PPE, hazard controls, and step-by-step checks for damage, fasteners, and debris. Record findings, report defects to supervisors and planning, and document any repairs. Includes housekeeping, tool care, and completion steps to return equipment to service safely at Kennecott Underground.
by Nyamjav Terbish, from the Community
Downloads: 0
Get
Template
Underground Air Door Electrical Inspection SWI
Detailed Safe Work Instruction for conducting a 4-week underground air door electrical inspection at Kennecott Underground. Intended for trained, authorized electricians, it outlines pre-start preparations, C1 isolation, hazard controls, PPE, and housekeeping. Step-by-step checks cover electro-mechanical drive units, PLC control cabinets, labeling, photo sensors, safety cables, lighting, and external visual inspections of disconnect, safety switch, and booster fan panels with arc flash and CRM signage. Includes E-stop functionality testing, reinstatement of removed items, cleanup, defect reporting, and documentation notes.
by Nyamjav Terbish, from the Community
Downloads: 0
Get
Template
Underground Air Compressor Daily Operation Checklist
This daily underground air compressor checklist helps teams verify safe operation in mining environments. Record key details such as date, inspector, work order, and location. Complete pre start preparations to identify and control hazards. Inspect the compressor area for housekeeping and general conditions. Confirm the fire suppression tag and expiry date. Check functionality by reviewing the HMI screen for operating parameters and alarms, confirming pressure readings, and noting any unusual noise. Perform a visual leak check around connections and hoses. Report defects to supervisors and coordinators, add comments, and capture signatures to close the task.
by Nyamjav Terbish, from the Community
Downloads: 0
Get

Underground Air Door Mechanical Inspection 4 Week

This safe work instruction outlines a planned offline mechanical inspection for underground air doors used in mining operations. It details qualifications, required equipment, critical safety controls, pre start preparations, isolation and lockout procedures, door inspection and maintenance tasks including visual checks, fasteners, cables, lubrication and chain tension review, and final task completion and documentation. The scope applies to underground power machine doors at Kennecott Underground with an estimated duration of two hours and ownership under the asset management team.

by Nyamjav Terbish, from the Community

Get

Template

Underground Pump Station Agitator Inspection (4-Week)

Use this SWI-based template to perform a scheduled 4-week visual inspection of underground pump station agitators. It covers pre-start preparation and C1 isolation, required PPE, hazard controls, and step-by-step checks for damage, fasteners, and debris. Record findings, report defects to supervisors and planning, and document any repairs. Includes housekeeping, tool care, and completion steps to return equipment to service safely at Kennecott Underground.

by Nyamjav Terbish, from the Community

Get

Template

Underground Air Door Electrical Inspection SWI

Detailed Safe Work Instruction for conducting a 4-week underground air door electrical inspection at Kennecott Underground. Intended for trained, authorized electricians, it outlines pre-start preparations, C1 isolation, hazard controls, PPE, and housekeeping. Step-by-step checks cover electro-mechanical drive units, PLC control cabinets, labeling, photo sensors, safety cables, lighting, and external visual inspections of disconnect, safety switch, and booster fan panels with arc flash and CRM signage. Includes E-stop functionality testing, reinstatement of removed items, cleanup, defect reporting, and documentation notes.

by Nyamjav Terbish, from the Community

Get

Template

Underground Air Compressor Daily Operation Checklist

This daily underground air compressor checklist helps teams verify safe operation in mining environments. Record key details such as date, inspector, work order, and location. Complete pre start preparations to identify and control hazards. Inspect the compressor area for housekeeping and general conditions. Confirm the fire suppression tag and expiry date. Check functionality by reviewing the HMI screen for operating parameters and alarms, confirming pressure readings, and noting any unusual noise. Perform a visual leak check around connections and hoses. Report defects to supervisors and coordinators, add comments, and capture signatures to close the task.

by Nyamjav Terbish, from the Community

Get

Underground 4 Week Air Compressor Inspection

About author

You might also like

Underground Air Door Mechanical Inspection 4 Week

Underground Pump Station Agitator Inspection (4-Week)

Underground Air Door Electrical Inspection SWI

Underground Air Compressor Daily Operation Checklist

You might also like

Underground Air Door Mechanical Inspection 4 Week

Underground Pump Station Agitator Inspection (4-Week)

Underground Air Door Electrical Inspection SWI

Underground Air Compressor Daily Operation Checklist