Template

NGM Power Tools Critical Controls Checklist

by Matthew Zulim, from the Community

Use this NGM Power Tools checklist to verify critical controls before work in high-risk environments. Confirm a team risk assessment is completed, guards protect from moving parts and pinch points, tools are unaltered, grounding checks are current, and operators know emergency stop functions. Ensure clothing and hair are secured. Mark each item Controlled, At Risk, or NA, pause work for any At Risk item, and record corrective actions.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
NGM Working at Heights: Ladders Critical Controls
Use this NGM-aligned Working at Heights - Ladders checklist to verify critical controls before and during ladder tasks. Confirm a team risk assessment, apply the 4:1 angle, secure and tie off ladders, extend at least three feet above the landing, and inspect ladder, fall protection, and tie-off points. Maintain three points of contact and use a harness when working 5 feet or higher. Mark each item Controlled, At Risk, or NA, pause unsafe work, and record corrective actions and notes.
by Josh Turner, from the Community
Downloads: 0
Get
Template
NGM Working at Heights Critical Controls Checklist
This NGM Working at Heights checklist helps mining teams verify critical controls before and during elevated work. It guides users to confirm team risk assessment completion, proper barriers and barricades, certified anchor points, and the correct fall protection system in use. It also prompts checks for partner working, an established escape and rescue plan, and certification for lift or man baskets. Use it to pause work when controls are at risk, document corrective actions, and maintain consistent compliance with site safety standards for working at heights.
by Jared Swensen, from the Community
Downloads: 0
Get
Template
NGM Working at Heights: Scaffold Platforms Checklist
Use this checklist to verify critical controls before working at heights on scaffold platforms. Confirm team risk assessment, platform tagging and tie-off, barricades and exclusion zones, handrails and kick plates, safe access and fall protection, and harness inspection. Mark each control as Controlled, At Risk, or Not Applicable, and pause work to correct any missing protections. This template supports safer operations in high-risk environments but does not replace professional advice.
by Matthew Zulim, from the Community
Downloads: 0
Get
Template
NGM Mobile Equipment Critical Controls
Use this mining checklist to verify critical controls for mobile equipment. Confirm team risk assessment, pre-operation checks, seatbelt use, operator certification, fire suppression status, tire condition, brake and steering tests, safe parking and parking brake, effective communications, pedestrian and equipment segregation, adequate berms and barriers, and load securement. Mark each control Controlled, At Risk, or Not Applicable and pause work to address any gaps.
by Josh Turner, from the Community
Downloads: 0
Get

NGM Working at Heights: Ladders Critical Controls

Use this NGM-aligned Working at Heights - Ladders checklist to verify critical controls before and during ladder tasks. Confirm a team risk assessment, apply the 4:1 angle, secure and tie off ladders, extend at least three feet above the landing, and inspect ladder, fall protection, and tie-off points. Maintain three points of contact and use a harness when working 5 feet or higher. Mark each item Controlled, At Risk, or NA, pause unsafe work, and record corrective actions and notes.

by Josh Turner, from the Community

Get

Template

NGM Working at Heights Critical Controls Checklist

This NGM Working at Heights checklist helps mining teams verify critical controls before and during elevated work. It guides users to confirm team risk assessment completion, proper barriers and barricades, certified anchor points, and the correct fall protection system in use. It also prompts checks for partner working, an established escape and rescue plan, and certification for lift or man baskets. Use it to pause work when controls are at risk, document corrective actions, and maintain consistent compliance with site safety standards for working at heights.

by Jared Swensen, from the Community

Get

Template

NGM Working at Heights: Scaffold Platforms Checklist

Use this checklist to verify critical controls before working at heights on scaffold platforms. Confirm team risk assessment, platform tagging and tie-off, barricades and exclusion zones, handrails and kick plates, safe access and fall protection, and harness inspection. Mark each control as Controlled, At Risk, or Not Applicable, and pause work to correct any missing protections. This template supports safer operations in high-risk environments but does not replace professional advice.

by Matthew Zulim, from the Community

Get

Template

NGM Mobile Equipment Critical Controls

Use this mining checklist to verify critical controls for mobile equipment. Confirm team risk assessment, pre-operation checks, seatbelt use, operator certification, fire suppression status, tire condition, brake and steering tests, safe parking and parking brake, effective communications, pedestrian and equipment segregation, adequate berms and barriers, and load securement. Mark each control Controlled, At Risk, or Not Applicable and pause work to address any gaps.

by Josh Turner, from the Community

Get

NGM Power Tools Critical Controls Checklist

About author

You might also like

NGM Working at Heights: Ladders Critical Controls

NGM Working at Heights Critical Controls Checklist

NGM Working at Heights: Scaffold Platforms Checklist

NGM Mobile Equipment Critical Controls

You might also like

NGM Working at Heights: Ladders Critical Controls

NGM Working at Heights Critical Controls Checklist

NGM Working at Heights: Scaffold Platforms Checklist

NGM Mobile Equipment Critical Controls