Template

GRM CHPP1 MET Checks

by Christie Hadwen, from the Community

This CHPP operations template guides daily and weekly MET checks across coal handling and preparation equipment. Verify screen distribution and spray positions, assess Jameson Cell froth depth and stability, inspect cyclones for roping or leaks, check magnetic separators, disc filters, and thickener performance, and confirm weightometer cleanliness and accuracy. Includes weekly tasks for Marcys, differentials, and medium control to improve reliability and product quality.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
GRM CHPP2 MET Checks
This CHPP2 MET checklist standardizes daily inspections across coal preparation operations. Verify screening performance (deslime, sink, float, tell tale, tailings dewatering), flotation via Jameson Cells (froth depths, wash water, leaks, stability), spirals and splitters, DMC and tailings/spiral cyclones, magnetic separators, and fine coal dewatering on belt filters. Assess thickener operation for tailings and magnetite circuits, weightometers, vacuum filtration, clarifier, buffer tank trends, and weekly checks. Use it to optimize throughput, product quality, moisture control, and safety, while maintaining stable pressures, flows, and reagent balances.
by Jessica Wright, from the Community
Downloads: 10+
Get
Template
CHPP Pulley Inspection Checklist
Use this CHPP pulley inspection checklist to assess the condition of drive and driven pulleys, belts, guards, isolation status, visible part numbers, and required replacements. Capture notes, photos, and signatures to document findings, schedule maintenance, and improve reliability while meeting safety requirements for coal handling and preparation plants.
by Colin Eames, from the Community
Downloads: 10+
Get
Template
Weekly Health and Safety Operations Monitoring
This weekly health and safety operations monitoring checklist helps supervisors and teams inspect workshop and site conditions. Review equipment and lifting gear checks, test emergency stops and interlocks, confirm faulty equipment is removed from service, and verify PPE and RPE use. Assess walkways and access, housekeeping, lighting and temperature, fire appliances and exits, storage of flammables and hazardous substances, and general building condition. Capture additional items, evidence, responsible persons, and dates to maintain compliance and improve safety performance.
by Mark Jackson, from the Community
Downloads: 0
Get
Template
Warehouse Health and Safety Compliance Audit
Use this warehouse health and safety and compliance audit checklist to evaluate risks and verify operational compliance across your site. Review fire safety systems and signage, emergency plans and evacuation drills, first aid resources, and weekly checks. Inspect racking for damage, load signage, pins and floor bolts, and ensure safe loading and housekeeping in aisles and docks. Verify forklift and material handling equipment certification, daily and weekly equipment checks, and staff induction and manual handling training. Assess building security including CCTV, access control, visitor logging, alarms, and lighting. Confirm electrical and statutory testing such as PAT, fixed wire testing, thermal imaging, and LOLER inspections. Check spill kits, waste and WEEE storage, yard tidiness, permits to work, fall protection and pallet gates, and record keeping for audits and corrective actions.
by Anis Elaidouni, from the Community
Downloads: 0
Get

GRM CHPP2 MET Checks

This CHPP2 MET checklist standardizes daily inspections across coal preparation operations. Verify screening performance (deslime, sink, float, tell tale, tailings dewatering), flotation via Jameson Cells (froth depths, wash water, leaks, stability), spirals and splitters, DMC and tailings/spiral cyclones, magnetic separators, and fine coal dewatering on belt filters. Assess thickener operation for tailings and magnetite circuits, weightometers, vacuum filtration, clarifier, buffer tank trends, and weekly checks. Use it to optimize throughput, product quality, moisture control, and safety, while maintaining stable pressures, flows, and reagent balances.

by Jessica Wright, from the Community

10+

Get

Template

CHPP Pulley Inspection Checklist

Use this CHPP pulley inspection checklist to assess the condition of drive and driven pulleys, belts, guards, isolation status, visible part numbers, and required replacements. Capture notes, photos, and signatures to document findings, schedule maintenance, and improve reliability while meeting safety requirements for coal handling and preparation plants.

by Colin Eames, from the Community

10+

Get

Template

Weekly Health and Safety Operations Monitoring

This weekly health and safety operations monitoring checklist helps supervisors and teams inspect workshop and site conditions. Review equipment and lifting gear checks, test emergency stops and interlocks, confirm faulty equipment is removed from service, and verify PPE and RPE use. Assess walkways and access, housekeeping, lighting and temperature, fire appliances and exits, storage of flammables and hazardous substances, and general building condition. Capture additional items, evidence, responsible persons, and dates to maintain compliance and improve safety performance.

by Mark Jackson, from the Community

Get

Template

Warehouse Health and Safety Compliance Audit

Use this warehouse health and safety and compliance audit checklist to evaluate risks and verify operational compliance across your site. Review fire safety systems and signage, emergency plans and evacuation drills, first aid resources, and weekly checks. Inspect racking for damage, load signage, pins and floor bolts, and ensure safe loading and housekeeping in aisles and docks. Verify forklift and material handling equipment certification, daily and weekly equipment checks, and staff induction and manual handling training. Assess building security including CCTV, access control, visitor logging, alarms, and lighting. Confirm electrical and statutory testing such as PAT, fixed wire testing, thermal imaging, and LOLER inspections. Check spill kits, waste and WEEE storage, yard tidiness, permits to work, fall protection and pallet gates, and record keeping for audits and corrective actions.

by Anis Elaidouni, from the Community

Get

GRM CHPP1 MET Checks

About author

You might also like

GRM CHPP2 MET Checks

CHPP Pulley Inspection Checklist

Weekly Health and Safety Operations Monitoring

Warehouse Health and Safety Compliance Audit

You might also like

GRM CHPP2 MET Checks

CHPP Pulley Inspection Checklist

Weekly Health and Safety Operations Monitoring

Warehouse Health and Safety Compliance Audit