Template

Steel Saw Pre-Operational Checklist

by Ian Teal, from the Community

Use this steel saw pre-operational check sheet to confirm the work area is tidy, the emergency stop functions, the saw is level and secure, and power cords are undamaged. Verify guards are fitted and adjusted, blades are suitable for the machine and material, rated for the required RPM, sharp, and correctly guided. Ensure adequate lighting and required PPE are in place. Record observations, inspector and verifier details to support SHEQ compliance and safer metal cutting operations.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Cross Cut Saw Pre-Operational Check Sheet
This pre-operational check sheet helps operators verify a cross cut saw is safe and ready for woodworking tasks. Inspect housekeeping around the saw, test the emergency stop to ensure the blade stops within 10 seconds, confirm LEV dust extraction works, and check the saw is level and secured. Review power cords, guards and safety devices, correct blade type, rip or crosscut fence, push stick availability, no hands markings, adequate lighting, and required PPE before every use.
by Ian Teal, from the Community
Downloads: 0
Get
Template
Core Saw Pre-Start Checklist
Use this Core Saw pre-start checklist to verify your core cutting setup before operations. Confirm the saw is stable on level ground, the area is clear and well lit, and ventilation and shade are adequate. Inspect electrical leads, switches, and guards for damage and secure fit. Check blade condition, mounting, and suitability for the rock type. Ensure the water pump functions, water supply and drainage are adequate, and sump bins drain without leaks or blockage. Verify core boats operate correctly and housekeeping is maintained to prevent trips and debris. This template supports safe, consistent field practices for mining exploration teams.
by Fernando Costa, from the Community
Downloads: 10+
Get
Template
Band Saw Pre-Operational Check Sheet
Use this pre-operational checklist to inspect a band saw before use. Verify housekeeping around the saw, secure setup and leveling, power cord and plug condition, correct blade selection and RPM rating, blade integrity, guards and covers, guide post and adjustable guard positioning, availability of push stick, and required PPE. Record observations, assign verification, and address issues before operation.
by IAN TEAL, from the Community
Downloads: 10+
Get
Template
Table Saw Risk Assessment Checklist
Assess and control risks when operating a table saw with this practical checklist. Verify machine condition, guards and shields, E-stop function, mounting security, and isolating switch access. Confirm operator training, defined safe working zones, and PPE use. Ensure manuals and SOP signage are available, waste and offcuts are managed, and the work area is clear. Designed to complement the equipment maintenance manual, this template helps teams standardize inspections and support compliance in workshops and on job sites.
by Jon Burnett, from the Community
Downloads: 10+
Get

Cross Cut Saw Pre-Operational Check Sheet

This pre-operational check sheet helps operators verify a cross cut saw is safe and ready for woodworking tasks. Inspect housekeeping around the saw, test the emergency stop to ensure the blade stops within 10 seconds, confirm LEV dust extraction works, and check the saw is level and secured. Review power cords, guards and safety devices, correct blade type, rip or crosscut fence, push stick availability, no hands markings, adequate lighting, and required PPE before every use.

by Ian Teal, from the Community

Get

Template

Core Saw Pre-Start Checklist

Use this Core Saw pre-start checklist to verify your core cutting setup before operations. Confirm the saw is stable on level ground, the area is clear and well lit, and ventilation and shade are adequate. Inspect electrical leads, switches, and guards for damage and secure fit. Check blade condition, mounting, and suitability for the rock type. Ensure the water pump functions, water supply and drainage are adequate, and sump bins drain without leaks or blockage. Verify core boats operate correctly and housekeeping is maintained to prevent trips and debris. This template supports safe, consistent field practices for mining exploration teams.

by Fernando Costa, from the Community

10+

Get

Template

Band Saw Pre-Operational Check Sheet

Use this pre-operational checklist to inspect a band saw before use. Verify housekeeping around the saw, secure setup and leveling, power cord and plug condition, correct blade selection and RPM rating, blade integrity, guards and covers, guide post and adjustable guard positioning, availability of push stick, and required PPE. Record observations, assign verification, and address issues before operation.

by IAN TEAL, from the Community

10+

Get

Template

Table Saw Risk Assessment Checklist

Assess and control risks when operating a table saw with this practical checklist. Verify machine condition, guards and shields, E-stop function, mounting security, and isolating switch access. Confirm operator training, defined safe working zones, and PPE use. Ensure manuals and SOP signage are available, waste and offcuts are managed, and the work area is clear. Designed to complement the equipment maintenance manual, this template helps teams standardize inspections and support compliance in workshops and on job sites.

by Jon Burnett, from the Community

10+

Get

Steel Saw Pre-Operational Checklist

About author

You might also like

Cross Cut Saw Pre-Operational Check Sheet

Core Saw Pre-Start Checklist

Band Saw Pre-Operational Check Sheet

Table Saw Risk Assessment Checklist

You might also like

Cross Cut Saw Pre-Operational Check Sheet

Core Saw Pre-Start Checklist

Band Saw Pre-Operational Check Sheet

Table Saw Risk Assessment Checklist