Template

Combustible Dust Audit Checklist by Zone

by Wes Peterson, from the Community

10+

Use this daily combustible dust audit checklist to inspect each zone across the sawmill, including planer infeed/enclosures, trimsaws, sorters, chipper, PDC and energy plant rooms. Verify primary dust removal from ignition sources, confirm secondary dust does not exceed 1/8 inch over 5% of the area, and assess housekeeping schedules. Evaluate employee practices such as compressed air use and hot work controls, and test knowledge on dust hazards and mitigation responsibilities. Document upset conditions, corrective actions, and opportunities to control dust at the source.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Combustible Dust Audit - Sawmill Checklist
This combustible dust audit checklist is designed for sawmills to support daily, zone-by-zone inspections that reduce explosion and fire risk. Inspect primary and secondary dust levels against program thresholds (including the 1/8 inch over 5% area limit), verify source control, housekeeping effectiveness, ventilation, and removal from ignition sources such as heaters, electrical equipment, hot work, or friction. Review divisional cleanup schedules and adequacy, note upset conditions, and document corrective actions. Evaluate worker practices, test employee knowledge of combustible dust hazards, and confirm requirements for compressed air use (pre-work card, no dust plume, last resort). Use this checklist to standardize hazard recognition, control, and reporting across planer, barker room, canter, gangs, edger, stacker, compressor room, chipper, and related areas.
by Wes Peterson, from the Community
Downloads: 10+
Get
Template
Combustible Dust Audit for Planer Zones
This combustible dust audit template is designed for planer lines and associated sawmill areas including infeed, tilt hoist, planer room, basements, chipper building, compressor room, and kiln control. It guides inspectors to assess primary and secondary dust accumulation thresholds, proximity to ignition sources, and risk from upset conditions. The checklist verifies divisional cleaning schedules, adequacy of controls at the source, and employee work practices such as compressed air use and hot work. It also includes knowledge checks on combustible dust hazards and responsibilities to reinforce training and compliance.
by Wes Peterson, from the Community
Downloads: 10+
Get
Template
Combustible Dust Audit for Outside Sawmill
This template supports daily, zone-based combustible dust audits across outside sawmill areas such as the mobile shop, hog, bins, re-entry zones, and roof. Verify primary and secondary dust levels, proximity to ignition sources, housekeeping schedules, and adequacy of controls. Reinforce safe work practices, including compressed air use, and test employee knowledge on key thresholds (1/8 inch over 5% area), mitigation responsibilities, and dust control plans to reduce explosion risks and improve compliance.
by Wes Peterson, from the Community
Downloads: 10+
Get
Template
Combustible Dust Audit - Elko
A daily, zone based combustible dust audit template for sawmill operations. Assess primary and secondary dust levels, ensure removal from ignition sources, and verify housekeeping schedules. Covers operating floor and basement zones, planer, kilns, furnace and hog areas. Includes checks on worker practices, compressed air pre work requirements, and brief knowledge questions to confirm understanding of dust hazards, unacceptable secondary dust thresholds of one eighth inch over five percent of the area, and the site dust control plan.
by Wes Peterson, from the Community
Downloads: 10+
Get

Combustible Dust Audit - Sawmill Checklist

This combustible dust audit checklist is designed for sawmills to support daily, zone-by-zone inspections that reduce explosion and fire risk. Inspect primary and secondary dust levels against program thresholds (including the 1/8 inch over 5% area limit), verify source control, housekeeping effectiveness, ventilation, and removal from ignition sources such as heaters, electrical equipment, hot work, or friction. Review divisional cleanup schedules and adequacy, note upset conditions, and document corrective actions. Evaluate worker practices, test employee knowledge of combustible dust hazards, and confirm requirements for compressed air use (pre-work card, no dust plume, last resort). Use this checklist to standardize hazard recognition, control, and reporting across planer, barker room, canter, gangs, edger, stacker, compressor room, chipper, and related areas.

by Wes Peterson, from the Community

10+

Get

Template

Combustible Dust Audit for Planer Zones

This combustible dust audit template is designed for planer lines and associated sawmill areas including infeed, tilt hoist, planer room, basements, chipper building, compressor room, and kiln control. It guides inspectors to assess primary and secondary dust accumulation thresholds, proximity to ignition sources, and risk from upset conditions. The checklist verifies divisional cleaning schedules, adequacy of controls at the source, and employee work practices such as compressed air use and hot work. It also includes knowledge checks on combustible dust hazards and responsibilities to reinforce training and compliance.

by Wes Peterson, from the Community

10+

Get

Template

Combustible Dust Audit for Outside Sawmill

This template supports daily, zone-based combustible dust audits across outside sawmill areas such as the mobile shop, hog, bins, re-entry zones, and roof. Verify primary and secondary dust levels, proximity to ignition sources, housekeeping schedules, and adequacy of controls. Reinforce safe work practices, including compressed air use, and test employee knowledge on key thresholds (1/8 inch over 5% area), mitigation responsibilities, and dust control plans to reduce explosion risks and improve compliance.

by Wes Peterson, from the Community

10+

Get

Template

Combustible Dust Audit - Elko

A daily, zone based combustible dust audit template for sawmill operations. Assess primary and secondary dust levels, ensure removal from ignition sources, and verify housekeeping schedules. Covers operating floor and basement zones, planer, kilns, furnace and hog areas. Includes checks on worker practices, compressed air pre work requirements, and brief knowledge questions to confirm understanding of dust hazards, unacceptable secondary dust thresholds of one eighth inch over five percent of the area, and the site dust control plan.

by Wes Peterson, from the Community

10+

Get

Combustible Dust Audit Checklist by Zone

About author

You might also like

Combustible Dust Audit - Sawmill Checklist

Combustible Dust Audit for Planer Zones

Combustible Dust Audit for Outside Sawmill

Combustible Dust Audit - Elko

You might also like

Combustible Dust Audit - Sawmill Checklist

Combustible Dust Audit for Planer Zones

Combustible Dust Audit for Outside Sawmill

Combustible Dust Audit - Elko