Template

PEGAS Bandsaw Daily Inspection Checklist (BM102)

by Stuart Vause, from the Community

Use this BM102 daily inspection checklist to maintain PEGAS bandsaws safely and reliably. Record the date and inspector, then verify band and swarf brush condition, oil mist level, emergency stop function, feed carriage operation, and that guards and fences are fitted correctly. Check electrical cables and panels for damage, confirm hydraulic oil level, and validate first-cut parts are correct and square. Note any defects and add photos. Complete checks Monday to Friday, submit reports weekly.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Behringer Bandsaw Daily Inspection Checklist BM102
Keep your metal cutting operations safe and consistent with this BM102 Behringer bandsaw daily inspection checklist. Operators complete checks Monday to Friday covering saw band condition, swarf brush setup, oil mist levels, emergency stop functionality, feed carriage operation and cleanliness, guard and fence placement, electrical cable integrity and locked cabinets, control panel lights and switches, hydraulic oil level, and verification that the first cut is correct and square. Record any defects with notes and photos, sign off each day, and submit the weekly report.
by Stuart Vause, from the Community
Downloads: 0
Get
Template
IMS Bandsaw Daily Inspection Sheet
Use this IMS bandsaw daily inspection sheet to standardize daily checks across Monday to Friday. Verify saw band condition, swarf brush setup, oil mist level, emergency stops, feed carriage operation free from swarf, guards and fences, electrical cables, control panel lights and switches, hydraulic oil level, and that the first cut part is correct and square. Note any defects and add photos. Ideal for manufacturing teams to improve safety, quality, and machine uptime, and to keep records for compliance and preventive maintenance.
by Kevin Brooklyn, from the Community
Downloads: 10+
Get
Template
RAMAX Operator Daily and Weekly Checklist
This RAMAX operator checklist helps crews record essential daily and weekly inspections for compaction equipment. It covers fuel and engine oil levels, hydraulic oil level, radiator and water tank checks, steering pins and linkage, condition of rollers, hydraulic hoses, fixings and guards, and the operation of control switches and levers. Weekly actions include cleaning air filters, cleaning hydraulic element sensors, draining water from the fuel filter bowl, and checking battery water level. Sections are organized Monday to Friday with fields for date, name, and signature to improve accountability, safety, and equipment uptime.
by Alex Topping, from the Community
Downloads: 10+
Get
Template
Daily Forklift Pre-Use Check
Conduct a thorough daily forklift pre-use check to verify critical safety items before operation. Inspect brakes, tires and wheels, horn, mirrors, seat belt, lights and beacon, and instrument gauges. Confirm fluid levels and condition, including engine oil, hydraulic oil, transmission oil, coolant water level, and propane. Check hydraulic pipes for leaks, air filter cleanliness, and overall machine cleanliness, then perform a short test drive. Includes weekly checks for tire pressure, battery fluid level, and greasing moving parts. Use this template to improve safety, compliance, and equipment reliability across warehouses, logistics hubs, and industrial sites.
by Jay Gorham, from the Community
Downloads: 20+
Get

Behringer Bandsaw Daily Inspection Checklist BM102

Keep your metal cutting operations safe and consistent with this BM102 Behringer bandsaw daily inspection checklist. Operators complete checks Monday to Friday covering saw band condition, swarf brush setup, oil mist levels, emergency stop functionality, feed carriage operation and cleanliness, guard and fence placement, electrical cable integrity and locked cabinets, control panel lights and switches, hydraulic oil level, and verification that the first cut is correct and square. Record any defects with notes and photos, sign off each day, and submit the weekly report.

by Stuart Vause, from the Community

Get

Template

IMS Bandsaw Daily Inspection Sheet

Use this IMS bandsaw daily inspection sheet to standardize daily checks across Monday to Friday. Verify saw band condition, swarf brush setup, oil mist level, emergency stops, feed carriage operation free from swarf, guards and fences, electrical cables, control panel lights and switches, hydraulic oil level, and that the first cut part is correct and square. Note any defects and add photos. Ideal for manufacturing teams to improve safety, quality, and machine uptime, and to keep records for compliance and preventive maintenance.

by Kevin Brooklyn, from the Community

10+

Get

Template

RAMAX Operator Daily and Weekly Checklist

This RAMAX operator checklist helps crews record essential daily and weekly inspections for compaction equipment. It covers fuel and engine oil levels, hydraulic oil level, radiator and water tank checks, steering pins and linkage, condition of rollers, hydraulic hoses, fixings and guards, and the operation of control switches and levers. Weekly actions include cleaning air filters, cleaning hydraulic element sensors, draining water from the fuel filter bowl, and checking battery water level. Sections are organized Monday to Friday with fields for date, name, and signature to improve accountability, safety, and equipment uptime.

by Alex Topping, from the Community

10+

Get

Template

Daily Forklift Pre-Use Check

Conduct a thorough daily forklift pre-use check to verify critical safety items before operation. Inspect brakes, tires and wheels, horn, mirrors, seat belt, lights and beacon, and instrument gauges. Confirm fluid levels and condition, including engine oil, hydraulic oil, transmission oil, coolant water level, and propane. Check hydraulic pipes for leaks, air filter cleanliness, and overall machine cleanliness, then perform a short test drive. Includes weekly checks for tire pressure, battery fluid level, and greasing moving parts. Use this template to improve safety, compliance, and equipment reliability across warehouses, logistics hubs, and industrial sites.

by Jay Gorham, from the Community

20+

Get

PEGAS Bandsaw Daily Inspection Checklist (BM102)

About author

You might also like

Behringer Bandsaw Daily Inspection Checklist BM102

IMS Bandsaw Daily Inspection Sheet

RAMAX Operator Daily and Weekly Checklist

Daily Forklift Pre-Use Check

You might also like

Behringer Bandsaw Daily Inspection Checklist BM102

IMS Bandsaw Daily Inspection Sheet

RAMAX Operator Daily and Weekly Checklist

Daily Forklift Pre-Use Check