Template

Cranes, Hoists and Rigging HSE GEMBA Template

by Ben Canterbury, from the Community

10+

Use this HSE GEMBA checklist to assess cranes, hoists, and rigging practices. Verify equipment identification and load ratings, review daily and annual inspection records, check lifting plans for high risk lifts, and confirm rigging straps and hardware are free of damage, wear, or distortion. Ensure pendant controls are clearly labeled, exclusion zones are maintained, and team members know load weights and limits. Capture operator training evidence, document deficiencies, attach photos, and assign corrective actions to close gaps.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
TPG Cranes, Hoists and Rigging Audit
Use this audit checklist to evaluate cranes, hoists, and rigging equipment for safe operation. Verify daily and annual inspections, clear identifiers and load ratings, and the condition of straps, chains, wire ropes, and hooks. Confirm lifting plans for high risk lifts, labeled controls, cordoned overhead lift areas, and that teams stay clear of suspended loads. Ensure workers know load weights, operate within capacity, and are trained through classroom and hands on sessions. Capture nonconformities and assign corrective actions.
by Nickolet Blackstock, from the Community
Downloads: 0
Get
Template
Rigging SIF RMVP Verification Checklist
This Serious Injury Fatality Road Map Verification for Rigging helps verify that high risk lifting and rigging activities are controlled. Use it to confirm shift visual inspections of rigging gear, maintain a rigging register, and ensure lifting plans exist for identified high risk operations. Check that team members are trained in rigging selection and use, that zero tolerance rules are documented and shared, and that tag lines are provided and used to keep hands off loads. Validate thorough examinations by a competent person and removal of defective equipment from service. Record verification details, outcomes against MM1, and capture signatures and timestamps for compliance.
by Gary Meighen-Watts, from the Community
Downloads: 20+
Get
Template
Cranes and Lifting Equipment Critical Process Confirmation
Use this critical process confirmation checklist to verify that cranes and lifting equipment are operated safely and in compliance with site and regulatory requirements. Confirm service records and certifications, pre-use inspections, load studies for high-capacity lifts, ground and weather conditions, and effective exclusion zones. Check operator competency, communication methods, load charts, hooks and SWL markings, use of tag lines, rigging protection, spotters, and personnel-lifting controls. Reinforce safe behaviors and ensure an emergency and rescue plan is documented and understood.
by Rob Feasey, from the Community
Downloads: 40+
Get
Template
General Cranes and Rigging Checklist
Ensure safe lifting operations with this cranes and rigging checklist for construction sites. Confirm required personnel, review lift studies and SWMS, set exclusion zones, and verify permits. Inspect and tag lifting gear, place crane matting under outriggers, use non-conductive tag lines, and check crane capacity and known services. Use this template to document corrective actions and inspection team details for every lift.
by James Trehearn, from the Community
Downloads: 0
Get

Cranes, Hoists and Rigging HSE GEMBA Template

About author

You might also like

TPG Cranes, Hoists and Rigging Audit

Rigging SIF RMVP Verification Checklist

Cranes and Lifting Equipment Critical Process Confirmation

General Cranes and Rigging Checklist

You might also like

TPG Cranes, Hoists and Rigging Audit

Rigging SIF RMVP Verification Checklist

Cranes and Lifting Equipment Critical Process Confirmation

General Cranes and Rigging Checklist