Template

Sapling Grove ASC Annual Exit Sign 90 Minute Test

by John Thomas, from the Community

Use this checklist to perform the required 90-minute discharge test for battery-powered exit signs and emergency lighting in an ambulatory surgery center. Verify illumination across waiting areas, halls, OR corridors, and exits, record start and completion times, note deficiencies and corrective actions, capture pass or fail, and certify compliance with NFPA 101 Section 7.9.3.1.1(3).

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Sapling Grove ASC Annual Emergency Light 90-Minute Test
Ensure compliance with NFPA 101 Section 7.9.3.1.1(3) using this annual 90-minute emergency lighting test checklist for ambulatory surgery centers. Verify emergency lights across key areas including Main Hall, Waiting Area, Pre-Op, Supply Hall, and Electrical Room, record pass or fail results, and document corrective actions taken. Capture start and completion times to confirm the full 90-minute duration for battery powered systems and certify completion with a signature page. Use this template to standardize inspections and maintain life safety compliance throughout your facility.
by John Thomas, from the Community
Downloads: 0
Get
Template
90-Minute Emergency Light Illumination Test
Use this checklist to perform the NFPA 101 7.9.2.1 required 90-minute emergency lighting illumination test in a surgery center. Inspect ORs, treatment rooms, and mechanical areas, verify generator circuit connection, document battery performance for the full 90 minutes, capture start and end times, and add a signature to certify the inspection. Standardize documentation, demonstrate compliance, and ensure egress lighting is ready during power loss.
by John Thomas, from the Community
Downloads: 0
Get
Template
90-Minute Exit Light Illumination Test (NFPA 101)
This healthcare compliance checklist helps surgery centers perform the NFPA 101 Section 7.9.2.1 90-minute exit light illumination test. Inspect each exit sign, confirm connection to generator circuits where applicable, and verify battery performance over a full 90 minutes. Record test duration and completion time, capture signatures certifying the inspection, and maintain documentation for survey readiness. Designed for facilities teams in ambulatory surgical environments, it supports routine life safety checks, consistent recordkeeping, and adherence to regulatory requirements without replacing professional guidance.
by John Thomas, from the Community
Downloads: 0
Get
Template
Emergency Exit Sign Annual 90 Minute Battery Test
This checklist supports the annual 90-minute battery test for emergency exit signs and related emergency lighting to comply with NFPA 101. It guides teams through activating lights to battery power, verifying continuous illumination for the full duration, and checking specified locations across clinical areas such as PACU, OR corridors, supply rooms, and exits. Use it to record observations, confirm pass/fail, and capture signatures for documentation. Templates from the Public Library are examples only; seek professional advice for suitability in your facility and jurisdiction.
by Joshua Seymour, from the Community
Downloads: 20+
Get

Sapling Grove ASC Annual Emergency Light 90-Minute Test

Ensure compliance with NFPA 101 Section 7.9.3.1.1(3) using this annual 90-minute emergency lighting test checklist for ambulatory surgery centers. Verify emergency lights across key areas including Main Hall, Waiting Area, Pre-Op, Supply Hall, and Electrical Room, record pass or fail results, and document corrective actions taken. Capture start and completion times to confirm the full 90-minute duration for battery powered systems and certify completion with a signature page. Use this template to standardize inspections and maintain life safety compliance throughout your facility.

by John Thomas, from the Community

Get

Template

90-Minute Emergency Light Illumination Test

Use this checklist to perform the NFPA 101 7.9.2.1 required 90-minute emergency lighting illumination test in a surgery center. Inspect ORs, treatment rooms, and mechanical areas, verify generator circuit connection, document battery performance for the full 90 minutes, capture start and end times, and add a signature to certify the inspection. Standardize documentation, demonstrate compliance, and ensure egress lighting is ready during power loss.

by John Thomas, from the Community

Get

Template

90-Minute Exit Light Illumination Test (NFPA 101)

This healthcare compliance checklist helps surgery centers perform the NFPA 101 Section 7.9.2.1 90-minute exit light illumination test. Inspect each exit sign, confirm connection to generator circuits where applicable, and verify battery performance over a full 90 minutes. Record test duration and completion time, capture signatures certifying the inspection, and maintain documentation for survey readiness. Designed for facilities teams in ambulatory surgical environments, it supports routine life safety checks, consistent recordkeeping, and adherence to regulatory requirements without replacing professional guidance.

by John Thomas, from the Community

Get

Template

Emergency Exit Sign Annual 90 Minute Battery Test

This checklist supports the annual 90-minute battery test for emergency exit signs and related emergency lighting to comply with NFPA 101. It guides teams through activating lights to battery power, verifying continuous illumination for the full duration, and checking specified locations across clinical areas such as PACU, OR corridors, supply rooms, and exits. Use it to record observations, confirm pass/fail, and capture signatures for documentation. Templates from the Public Library are examples only; seek professional advice for suitability in your facility and jurisdiction.

by Joshua Seymour, from the Community

20+

Get

Sapling Grove ASC Annual Exit Sign 90 Minute Test

About author

You might also like

Sapling Grove ASC Annual Emergency Light 90-Minute Test

90-Minute Emergency Light Illumination Test

90-Minute Exit Light Illumination Test (NFPA 101)

Emergency Exit Sign Annual 90 Minute Battery Test

You might also like

Sapling Grove ASC Annual Emergency Light 90-Minute Test

90-Minute Emergency Light Illumination Test

90-Minute Exit Light Illumination Test (NFPA 101)

Emergency Exit Sign Annual 90 Minute Battery Test