Template

MDC Cold Room Safety Inspection

by Tanya Aspinall, from the Community

10+

This MDC Cold Room Safety Inspection template helps laboratory teams verify safe operation and storage conditions in shared cold rooms. Use it to check cleanliness and organization, secure racking, correct labeling, functional emergency release and alarms, good flooring and housekeeping, and to capture comments. Support compliance, reduce risk, and maintain reliable sample integrity.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Cold Store and Warehouse Inspection Checklist
Use this cold store and warehouse inspection checklist to assess facility condition, storage practices, and food safety controls. Verify temperature monitoring and calibration, pest control measures, hygiene, traceability, and documentation. Confirm vehicles, dispatch processes, and transport meet cold chain requirements to reduce risk and maintain compliance.
by Kevin McLean, from the Community
Downloads: 0
Get
Template
MDC Lab Inspection Template 2021
This MDC Lab Inspection Template helps teams assess laboratory safety and compliance across academic and research environments. Sections guide checks on infrastructure and housekeeping, emergency procedures, safety documentation (risk assessments, COSHH), first aid, electrical and chemical safety, biological controls, ionising and non‑ionising radiation, PPE/RPE, pressure systems and autoclaves, piped gases and cryogenics, ladders and kick stools, LEV performance, waste management, and water systems. Use it to capture findings, assign actions, and improve lab standards.
by Tanya Aspinall, from the Community
Downloads: 0
Get
Template
Cold and NDT Safety Checklist
This Cold and NDT checklist helps teams manage safe nondestructive testing and cold work activities across industrial environments. It covers workplace conditions, clear access and demarcation, storage practices, manual handling, and PPE compliance. It also guides routine fire safety checks, including equipment inspection, signage, and emergency escape readiness. For chemical use, it outlines proper PPE, storage in designated cabinets, ventilation, labeling, secondary containment, and spill response. Use it to document findings, correct hazards, and strengthen safety and compliance.
by Ye Htet Lin (Brian), from the Community
Downloads: 0
Get
Template
GMP Weekly Audit Checklist (MDC)
This GMP Weekly Audit template helps manufacturing teams verify housekeeping, hygiene, and equipment integrity across MDC areas. Inspect floors, bins, walkways, fire exits, and hygiene stations; confirm operator stations are locked, consumables cabinets are tidy, tools are stored, and unused film is covered. Check allergen and glass bins, shrink wrap storage, layaside and finished goods pallets, damages area, mezzanine condition, plastics and glazing integrity, and canteen standards. Use it to maintain compliance and audit readiness every week.
by Sayed Aboulela, from the Community
Downloads: 10+
Get

Cold Store and Warehouse Inspection Checklist

Use this cold store and warehouse inspection checklist to assess facility condition, storage practices, and food safety controls. Verify temperature monitoring and calibration, pest control measures, hygiene, traceability, and documentation. Confirm vehicles, dispatch processes, and transport meet cold chain requirements to reduce risk and maintain compliance.

by Kevin McLean, from the Community

Get

Template

MDC Lab Inspection Template 2021

This MDC Lab Inspection Template helps teams assess laboratory safety and compliance across academic and research environments. Sections guide checks on infrastructure and housekeeping, emergency procedures, safety documentation (risk assessments, COSHH), first aid, electrical and chemical safety, biological controls, ionising and non‑ionising radiation, PPE/RPE, pressure systems and autoclaves, piped gases and cryogenics, ladders and kick stools, LEV performance, waste management, and water systems. Use it to capture findings, assign actions, and improve lab standards.

by Tanya Aspinall, from the Community

Get

Template

Cold and NDT Safety Checklist

This Cold and NDT checklist helps teams manage safe nondestructive testing and cold work activities across industrial environments. It covers workplace conditions, clear access and demarcation, storage practices, manual handling, and PPE compliance. It also guides routine fire safety checks, including equipment inspection, signage, and emergency escape readiness. For chemical use, it outlines proper PPE, storage in designated cabinets, ventilation, labeling, secondary containment, and spill response. Use it to document findings, correct hazards, and strengthen safety and compliance.

by Ye Htet Lin (Brian), from the Community

Get

Template

GMP Weekly Audit Checklist (MDC)

This GMP Weekly Audit template helps manufacturing teams verify housekeeping, hygiene, and equipment integrity across MDC areas. Inspect floors, bins, walkways, fire exits, and hygiene stations; confirm operator stations are locked, consumables cabinets are tidy, tools are stored, and unused film is covered. Check allergen and glass bins, shrink wrap storage, layaside and finished goods pallets, damages area, mezzanine condition, plastics and glazing integrity, and canteen standards. Use it to maintain compliance and audit readiness every week.

by Sayed Aboulela, from the Community

10+

Get

MDC Cold Room Safety Inspection

About author

You might also like

Cold Store and Warehouse Inspection Checklist

MDC Lab Inspection Template 2021

Cold and NDT Safety Checklist

GMP Weekly Audit Checklist (MDC)

You might also like

Cold Store and Warehouse Inspection Checklist

MDC Lab Inspection Template 2021

Cold and NDT Safety Checklist

GMP Weekly Audit Checklist (MDC)