Template

UGL Stanwell Electrical Safety Audit Checklist

by Conor Peers, from the Community

10+

This comprehensive electrical safety audit checklist for UGL and Stanwell sites helps verify compliance across power generation environments. It covers worker authorisations and competency, energised electrical work controls, verification and test reporting, HV and LV auditing, hazardous areas compliance, isolation and access procedures, portable equipment and RCD testing, tools and test equipment calibration, PPE and rescue kit readiness, arc flash assessment and labeling, fixed equipment labelling and maintenance, cathodic protection systems, generator and temporary supply requirements, decommissioning practices, and documentation management. Ideal for utilities, contractors, and plant teams.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
UGL Electrical Safety Audit Checklist
Conduct a thorough electrical safety audit with this UGL template. Review general controls and risk assessments, ensure safe work method statements exist for energised work, and verify isolation and testing to prove de energised. Check instrument function and annual calibration, appropriate personal protective equipment including insulated gloves, and the use of insulated tools. Confirm portable equipment testing and tagging per AS3760 2010, worker training in cardiopulmonary resuscitation and switchboard rescue, and proper incident reporting and investigation. Capture hazardous area compliance to AS NZS 4761 and maintain registers for equipment, emergency lighting, residual current devices, and authorised personnel.
by Conor Peers, from the Community
Downloads: 20+
Get
Template
Grain Site Electrical Safety Audit Checklist
This electrical safety audit checklist is designed for GrainCorp grain sites and similar agricultural facilities. It helps verify training and licensing, risk assessments, and high voltage safety procedures. Items cover permits and lockout, contractor compliance, planned maintenance and schematics, clear access to switchboards, labeling of isolation points, and weekly maintenance planning. It includes checks for work near power lines, RCD protection and tagging for portable tools, and HV access permits with suitable PPE and test equipment. Hazardous area controls address combustible dust, verification dossiers, ventilation, housekeeping, and audits. Excavation and penetration permits are confirmed, and reporting of incidents and hazards is reinforced.
by Paul Thew, from the Community
Downloads: 20+
Get
Template
FRCV Electrical Conductor and Arc Flash Management
Use this Fatal Risk Control Verification checklist to reduce exposure to electrocution and arc flash during electrical work at mine sites. The template covers protection systems and studies, switchboard checks, inspection of test equipment and PPE, safe switching and isolations, access control to electrical operating areas, arc flash hazard assessment and labeling, remote switching, and high voltage work requirements. It aligns with Australian Standards and site engineering specifications and supports verification of permits, training, and records for compliance and safe operations.
by Samantha Fellows, from the Community
Downloads: 20+
Get
Template
UGL Pre-Work Inspection Checklist
This UGL pre-work inspection checklist helps supervisors confirm site readiness and controls before tasks begin. Verify JHAs are completed and understood, work permits and isolations are in place, signage and barricades are set, and an emergency response plan is established. Check housekeeping, access, lighting, ventilation, weather precautions, and appropriate PPE. Address SIMOPs and critical risk areas including working at height, mobile plant, confined spaces, excavation and trenching, cranes and lifting, energy isolation, electrical work, traffic management, asbestos, and hazardous chemicals. Use this template as a practical starting point and tailor it to your site and regulations.
by Anthony Baskovich, from the Community
Downloads: 20+
Get

UGL Stanwell Electrical Safety Audit Checklist

About author

You might also like

UGL Electrical Safety Audit Checklist

Grain Site Electrical Safety Audit Checklist

FRCV Electrical Conductor and Arc Flash Management

UGL Pre-Work Inspection Checklist

You might also like

UGL Electrical Safety Audit Checklist

Grain Site Electrical Safety Audit Checklist

FRCV Electrical Conductor and Arc Flash Management

UGL Pre-Work Inspection Checklist