Template

Solar Thermal Service Checklist

by ADAM WARD, from the Community

20+

This solar thermal service checklist helps technicians and facility teams assess and maintain solar hot water systems. Verify collector installation and penetrations, controller and electrical compliance, pump station mounting, and correct sensor placement. Check the solar-rated expansion vessel, capacity and set pressure, recharge if needed, purge air, confirm flow rate, and record system and hot water temperatures. Capture glycol concentration, system pressure, relief valve rating and discharge location. Note defects, attach photos, and collect customer feedback to ensure safe, efficient operation.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Mains Pressure Hot Water Storage Service Report
Use this mains pressure hot water storage system service report to capture customer and site details, cylinder make, model and serial number, engineer and company info, and service date. Record primary circuit type and maximum primary flow temperature, incoming static cold water pressure, strainer cleaning, water hardness and scale reduction, thermostat setpoint, maximum hot water flow rate, solar compatibility, nearest outlet temperature, and pipe insulation. For unvented systems, log location and setting of the pressure reducing valve, test temperature and pressure relief and expansion valves, verify tundish and discharge pipework comply with Part G, confirm energy source cut-out devices, and check expansion vessel or air gap. For thermal stores, note achievable store and maximum hot water temperatures. Confirm compliance with Building Regulations and manufacturer instructions, demonstrate controls to the customer, and capture engineer comments, parts used, and signatures.
by Curtis Simpson, from the Community
Downloads: 0
Get
Template
ASP Solar Thermal Inspections Checklist
Use this ASP Solar Thermal Inspections checklist to assess solar energy systems with thermal imaging. Record site and PPM details, work order number, date, preparer, and location. Verify the supply main switch and distribution board or MCBs, check AC cabling, inverter imaging, DC isolators, and combiner boxes, and inspect solar panels. Capture issues found and follow up actions. For guidance only; seek professional advice for your jurisdiction.
by Clare Healy, from the Community
Downloads: 0
Get
Template
Phoenix Gas Services Ltd Solar Audit Checklist
Use this solar audit checklist to review installation quality and safe operation of solar thermal systems. Verify PRVs and thermostats, expansion vessel charge, collectors and roof fixings, pump station support, reducing valve pressures, antifreeze mixture, NTC operation, lagging and zoning, draw-off temperature at the furthest outlet, and compliance with Building Regulations Document G. Includes sections for site details, operative credentials, safety practices, preliminary electrical tests, documentation, recommendations, actions, and sign-offs.
by Stuart Taylor, from the Community
Downloads: 0
Get
Template
Quick Solar Site Inspection Checklist
Use this quick solar site inspection checklist to evaluate utility and remote tower sites powered by solar. Review site access and fencing, battery box condition, battery dates and voltages, charge controller settings, and solar panel performance. Confirm earthing, anodes, and stay wire integrity; check lattice mast and security camera placement. Capture photos, log readings and discrepancies, and record corrective actions.
by Nashim Singh, from the Community
Downloads: 30+
Get

Solar Thermal Service Checklist

About author

You might also like

Mains Pressure Hot Water Storage Service Report

ASP Solar Thermal Inspections Checklist

Phoenix Gas Services Ltd Solar Audit Checklist

Quick Solar Site Inspection Checklist

You might also like

Mains Pressure Hot Water Storage Service Report

ASP Solar Thermal Inspections Checklist

Phoenix Gas Services Ltd Solar Audit Checklist

Quick Solar Site Inspection Checklist