Template

Smart Networks Chamber Inspection Checklist

by Chris Jones, from the Community

Comprehensive checklist for Smart Networks chamber and manhole inspections used by engineering and construction contractors. Capture site details, confirm SWMS completion, identify hazards, and document work zone traffic management. Record asset ID and location, take photos of valves or fireplugs before works, measure depth to road surface, verify mounting plate suitability and installation, and ensure the site is left safe and tidy. Include photos and notes to create a complete audit trail and support compliance.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Smart Networks Acoustic Logger Audit
This installation audit checklist helps field teams verify the safe and correct setup of acoustic loggers on water network assets. Assess site risks and chamber access needs, confirm traffic control and manual handling considerations, and check for sharps exposure. Validate surface antenna mounting on lids, ensure the logger is fixed to a fire plug or valve with secure ground contact, and confirm Bluetooth login, Run mode, and internal settings such as firmware, clock, and battery. Capture photos to document installation quality.
by Adrian Cavallaro, from the Community
Downloads: 10+
Get
Template
Quality Chamber Audit Checklist
This quality chamber audit checklist helps teams assess telecom utility chambers for compliance and workmanship. Verify HAUC-spec reinstatement, check frame and lid seating, wall and floor condition, duct locations and seals, and box furniture installation. Confirm chamber depth to spec, monitor gas levels before and during entry, and document findings with required photo evidence and summary photos. Capture site details, ratings, and signatures to close audits and support continuous quality improvements.
by Philip Sandland, from the Community
Downloads: 0
Get
Template
Cable and Joint Chamber Quality Audit Checklist
Audit cable and joint installations in telecom chambers using this PIA checklist. Capture contractor and team details, chamber ID, DP/ASN, site location and date. Inspect labeling, routing and affixing to bearers, tube capping, tidy work areas, and record defects with photos. Confirm any core drilling in BT chambers and verify duct entries are cut and sealed. Mark pass or fail, add conclusions, and sign off. Built for comms installation audits across fiber and copper networks.
by Tracy Peart, from the Community
Downloads: 0
Get
Template
Chamber Installation QC Master Template
This Chamber Installation QC master template helps crews and supervisors verify key steps during chamber and manhole installation. Checklist items include correct ring depth for cover, 100 mm compacted Type 1 base, sump requirements for FW4, FW6, CW1 and CW2, chamber floor materials, duct entry spacing and flush cuts, brackets and bearers installation, backfilling around FW chambers, bedding of frames and covers with rapid set mortar, concrete surrounds to frames, surface flushness checks, and reinstatement in accordance with SROH. Use it to standardize inspections, capture site details such as location, PN, chamber size, subcontractor gang, and document compliance for quality control.
by Robert Mayman, from the Community
Downloads: 0
Get

Smart Networks Acoustic Logger Audit

This installation audit checklist helps field teams verify the safe and correct setup of acoustic loggers on water network assets. Assess site risks and chamber access needs, confirm traffic control and manual handling considerations, and check for sharps exposure. Validate surface antenna mounting on lids, ensure the logger is fixed to a fire plug or valve with secure ground contact, and confirm Bluetooth login, Run mode, and internal settings such as firmware, clock, and battery. Capture photos to document installation quality.

by Adrian Cavallaro, from the Community

10+

Get

Template

Quality Chamber Audit Checklist

This quality chamber audit checklist helps teams assess telecom utility chambers for compliance and workmanship. Verify HAUC-spec reinstatement, check frame and lid seating, wall and floor condition, duct locations and seals, and box furniture installation. Confirm chamber depth to spec, monitor gas levels before and during entry, and document findings with required photo evidence and summary photos. Capture site details, ratings, and signatures to close audits and support continuous quality improvements.

by Philip Sandland, from the Community

Get

Template

Cable and Joint Chamber Quality Audit Checklist

Audit cable and joint installations in telecom chambers using this PIA checklist. Capture contractor and team details, chamber ID, DP/ASN, site location and date. Inspect labeling, routing and affixing to bearers, tube capping, tidy work areas, and record defects with photos. Confirm any core drilling in BT chambers and verify duct entries are cut and sealed. Mark pass or fail, add conclusions, and sign off. Built for comms installation audits across fiber and copper networks.

by Tracy Peart, from the Community

Get

Template

Chamber Installation QC Master Template

This Chamber Installation QC master template helps crews and supervisors verify key steps during chamber and manhole installation. Checklist items include correct ring depth for cover, 100 mm compacted Type 1 base, sump requirements for FW4, FW6, CW1 and CW2, chamber floor materials, duct entry spacing and flush cuts, brackets and bearers installation, backfilling around FW chambers, bedding of frames and covers with rapid set mortar, concrete surrounds to frames, surface flushness checks, and reinstatement in accordance with SROH. Use it to standardize inspections, capture site details such as location, PN, chamber size, subcontractor gang, and document compliance for quality control.

by Robert Mayman, from the Community

Get

Smart Networks Chamber Inspection Checklist

About author

You might also like

Smart Networks Acoustic Logger Audit

Quality Chamber Audit Checklist

Cable and Joint Chamber Quality Audit Checklist

Chamber Installation QC Master Template

You might also like

Smart Networks Acoustic Logger Audit

Quality Chamber Audit Checklist

Cable and Joint Chamber Quality Audit Checklist

Chamber Installation QC Master Template