Template

Gas LGSR Quality Assurance Checklist

by John Oliver, from the Community

Use this Gas LGSR quality assurance template to review landlord gas safety records and confirm compliance. Check engineer identity and Gas Safe registration, appliance details and locations, flue condition and performance, combustion analysis, tightness tests, ventilation, working pressures, and safety devices. Record CO and CO2 ratios, heat input, smoke and CO alarms, warning notices, and any required repairs. Capture audit results with signatures to standardize inspections and improve safety.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Central Heating Service and Repair Audit
This central heating service and repair audit checklist helps gas and heating engineers systematically assess domestic and communal heating appliances and installations. It covers client and site details, operative Gas Safe licence verification, safety and isolation, preliminary electrical tests, appliance details and photos, flue routes, ventilation, installation to manufacturer instructions, controls and operation, fuse ratings, cleaning and inspection, flue operational checks, safety devices, gas rate and operating pressure, CO and CO2 ratios, meter installation, tightness testing, pipework inspection, equipotential bonding, identification of unsafe situations, warning notices, documentation and LGSR completion, and audit outcomes with corrective actions and sign off.
by Stuart Taylor, from the Community
Downloads: 0
Get
Template
Gas Service and Repair Quality Control Inspection
This quality control inspection checklist supports gas service and repair operations with a structured, in-progress audit. It covers electrical safety isolation and suitability of test instruments; core gas safety tasks including Regulation 26(9) checks, tightness testing, purging, working pressures, heat input, commissioning to manufacturer instructions, visual inspection of other appliances, combustion analysis, and CO alarm verification. It confirms familiarity with the Gas Industry Unsafe Situations Procedure and access to labels and notices. The template also checks equipment and calibration (manometer, flue gas analyser, PPE, first aid), van stock and consumables, and vehicle condition. A site results section captures overall score, failures, required actions or training, and both operative and QC signatures.
by James Malone, from the Community
Downloads: 0
Get
Template
NCC Commercial Gas Servicing Checklist
This commercial gas servicing checklist helps technicians inspect and document boiler and burner performance. Record CO2 levels, CO ppm, combustion efficiency, flue gas temperatures, gas rate, inlet and burner pressures, and confirm interlocks. Verify flues and terminations, ventilation requirements, electrical installation, safety valves, and pipework. Perform let-by and tightness tests, flue flow and spillage tests, and confirm safety devices and controls before approval.
by Mark Mahoney, from the Community
Downloads: 0
Get
Template
Intergas Gas Quality Check Form
Ensure consistent gas service quality and compliance with this Intergas Gas Quality Check Form. The template guides engineers through electrical and gas meter checks, tightness and working pressure tests, flue route inspection, CO/CO2 readings, safety device operation, PPE and HSE requirements, and customer communication. Ideal for documenting benchmark records, issuing safety notices, and confirming safe completion.
by David Stanley, from the Community
Downloads: 0
Get

Central Heating Service and Repair Audit

This central heating service and repair audit checklist helps gas and heating engineers systematically assess domestic and communal heating appliances and installations. It covers client and site details, operative Gas Safe licence verification, safety and isolation, preliminary electrical tests, appliance details and photos, flue routes, ventilation, installation to manufacturer instructions, controls and operation, fuse ratings, cleaning and inspection, flue operational checks, safety devices, gas rate and operating pressure, CO and CO2 ratios, meter installation, tightness testing, pipework inspection, equipotential bonding, identification of unsafe situations, warning notices, documentation and LGSR completion, and audit outcomes with corrective actions and sign off.

by Stuart Taylor, from the Community

Get

Template

Gas Service and Repair Quality Control Inspection

This quality control inspection checklist supports gas service and repair operations with a structured, in-progress audit. It covers electrical safety isolation and suitability of test instruments; core gas safety tasks including Regulation 26(9) checks, tightness testing, purging, working pressures, heat input, commissioning to manufacturer instructions, visual inspection of other appliances, combustion analysis, and CO alarm verification. It confirms familiarity with the Gas Industry Unsafe Situations Procedure and access to labels and notices. The template also checks equipment and calibration (manometer, flue gas analyser, PPE, first aid), van stock and consumables, and vehicle condition. A site results section captures overall score, failures, required actions or training, and both operative and QC signatures.

by James Malone, from the Community

Get

Template

NCC Commercial Gas Servicing Checklist

This commercial gas servicing checklist helps technicians inspect and document boiler and burner performance. Record CO2 levels, CO ppm, combustion efficiency, flue gas temperatures, gas rate, inlet and burner pressures, and confirm interlocks. Verify flues and terminations, ventilation requirements, electrical installation, safety valves, and pipework. Perform let-by and tightness tests, flue flow and spillage tests, and confirm safety devices and controls before approval.

by Mark Mahoney, from the Community

Get

Template

Intergas Gas Quality Check Form

Ensure consistent gas service quality and compliance with this Intergas Gas Quality Check Form. The template guides engineers through electrical and gas meter checks, tightness and working pressure tests, flue route inspection, CO/CO2 readings, safety device operation, PPE and HSE requirements, and customer communication. Ideal for documenting benchmark records, issuing safety notices, and confirming safe completion.

by David Stanley, from the Community

Get

Gas LGSR Quality Assurance Checklist

About author

You might also like

Central Heating Service and Repair Audit

Gas Service and Repair Quality Control Inspection

NCC Commercial Gas Servicing Checklist

Intergas Gas Quality Check Form

You might also like

Central Heating Service and Repair Audit

Gas Service and Repair Quality Control Inspection

NCC Commercial Gas Servicing Checklist

Intergas Gas Quality Check Form