Template

Pump Service 3 inch and 4 inch

by Cesar Sepulveda, from the Community

Use this pump service report to maintain 3 inch and 4 inch pumps in oil and gas operations. Record operator, rig, asset number, date and location. Inspect cleanliness, leaks and housing bolts. Drain and check the volute, frame, wear plate and O ring seals. Verify RA oil level, pulley alignment and signs of seal failure. Check fittings, motor, power cord and plug. Replace or top up oil, inspect belts and reinstall guards. Reassemble, test rotation at low RPM, ramp to working RPM and capture photos and video. Complete final inspection and notify the supervisor.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
BOS 3 and 4 Inch Pump Service Sheet
Use this service sheet to safely maintain 3 and 4 inch pumps used in field operations. It details weekly tasks and daily cold-climate precautions, including pre-job risk assessment, lockout tagout, draining and disposal, inspection of volute, wear plates and seals, oil condition and level, belt tension and alignment, fittings and motor checks, hose reconnection, rotation verification, and final performance testing.
by Gary Bonnett, from the Community
Downloads: 10+
Get
Template
EC Hose Test Checklist
This EC Hose Test checklist is designed for fire departments and emergency teams to document annual hose testing across apparatus. Record details for 1 inch, 1.75 inch, 2.5 inch, and 5 inch hose lines, including diameter, length, color, and hose number. Log any failures or leaks, attach photos of failed hoses, and note whether the hose was removed from service. The template prompts creation of a service request audit for failed hoses and supports structured record keeping for compliance and readiness.
by NAFD IL, from the Community
Downloads: 0
Get
Template
Abrasive Wheel Equipment Checklist
Use this checklist to assess abrasive wheel and grinder safety. Verify work rests are within one eighth inch, tongue guards within one quarter inch, and side guards cover the spindle, nut, flange and most of the wheel. Confirm bench and pedestal grinders are permanently mounted, goggles or face shields are worn, and wheel RPM ratings match the motor. Check for proper wiring, grounding, individual on and off controls, and ring testing of new wheels. Ensure dust collection and splash guards are in place and cleanliness is maintained. Suitable for manufacturing and workshop safety inspections.
by Caroline Gaillard, from the Community
Downloads: 10+
Get
Template
Judson General Safety Audit
This general safety audit checklist helps teams evaluate manufacturing and office areas for compliance and housekeeping. It covers cleanliness and material storage, PPE signage and use, MSDS access, and appropriate footwear. Facilities checks include labeled electrical panels with 36-inch clearance, outlet labeling, trip hazards, leaks, and waste management. Emergency preparedness covers clear, marked exits with 28-inch routes, fire extinguishers (visible and inspected monthly), eyewash/shower availability, secured racks and shelving, and stocked first aid kits. Hazardous materials controls verify labeling, proper containers and sealing, flammable storage away from ignition, rag containers covered, and MSDS availability. Equipment and machinery checks include guarding, accessible emergency stops, good electrical cords and air hoses, and orderly storage to remove unnecessary items.
by Judson Smith, from the Community
Downloads: 20+
Get

Pump Service 3 inch and 4 inch

About author

You might also like

BOS 3 and 4 Inch Pump Service Sheet

EC Hose Test Checklist

Abrasive Wheel Equipment Checklist

Judson General Safety Audit

You might also like

BOS 3 and 4 Inch Pump Service Sheet

EC Hose Test Checklist

Abrasive Wheel Equipment Checklist

Judson General Safety Audit