Template

Pre-Heat Installation Projects Audit Checklist

by Amy Ensor, from the Community

10+

Use this audit checklist to verify new pre-heat system installations against G17 and SCO requirements for gas networks. Capture project identifiers (G17, NRO), installation company and personnel, and audit type. Confirm presence of the full G17 project file and Parts A–F, approved NRP, and a Competent Person in control. Check end-to-end test sheets, EL/6 electrical isolations, and that works follow the approved G17 design. Record results of electrical and hazardous area inspections, competency of installers, and completion of commissioning. Validate availability and submission of As Built drawings to Statutory Records, ensure marked-up drawings are left on site, and that E&I asset data is collected via the ADC template. Note site condition, sign-offs (G17 Parts D and E, NRP sections), and any additional comments.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions .

Template
NRP Departmental Safety Audit Checklist
This NRP Departmental Safety Audit checklist helps supervisors assess construction job sites for compliance and safety. It covers site layout and postings, housekeeping, PPE, fall protection, concrete and silica controls, material handling, ladders, hand and power tools, fire prevention, excavation, confined spaces, scaffolding, electrical systems, heavy equipment, hot work, cranes, and rigging. Capture positive observations, identify hazards, assign corrective actions with responsible persons and due dates, and document audit notifications to improve safety performance across departments.
by Stephen Smolenski, from the Community
Downloads: 10+
Get
Template
Contractor Spot Check Checklist
Use this contractor spot check to verify contractor induction, sign in and sign out, review of SWMS and JSA, correct PPE, licenses and permits, current safety data sheets with local emergency contacts, and safe use of tools and electrical equipment. Confirm test and tag, use of RCDs, housekeeping, vehicle parking, and that plant rooms are secure. Capture details of the site, company, date, and building management representatives. Note non conformances and ensure the workplace is left clean and secure after works.
by Dexus Security, from the Community
Downloads: 20+
Get
Template
Lidl Health and Safety File Checklist
Use this checklist to compile a complete Health and Safety File for Lidl construction projects in line with CDM requirements. Record scope of works, key contacts, project dates, and residual risks. Document structural principles and calculations, hazardous materials, maintenance and access strategies, and services and fire safety information. Attach as built drawings, subcontractor deliverables, and full electrical and mechanical details. Include test and commissioning data, certificates such as NICEIC, emergency lighting, air pressure test, EPC, and Building Regulations, plus any non standard items.
by Lidl Property Office, from the Community
Downloads: 10+
Get
Template
Carpentry BICs and Kitchen 1st Phase Checklist
This carpentry inspection checklist guides the first-phase installation of built-in cupboards (BICs) and kitchen joinery. Use it to verify pre-measurements, confirm tile work completion, and ensure joinery design and drawings are approved and on site. Perform pre-installation checks, confirm paintwork second coat and site cleanliness, then inspect installation quality: carcasses plumb and level, adequate fixings, accurate cutouts for pipes, plugs, and switches, smooth operation of shelf sliders and hinges, doors and shelves correctly fixed and adjusted, handles aligned and secure, and edges/boards free of defects and chips. The checklist also covers general housekeeping, required PPE, safety file currency, and captures subcontractor and foreman sign-offs for approvals and completion.
by Flip le Roux, from the Community
Downloads: 0
Get

Pre-Heat Installation Projects Audit Checklist

About author

You might also like

NRP Departmental Safety Audit Checklist

Contractor Spot Check Checklist

Lidl Health and Safety File Checklist

Carpentry BICs and Kitchen 1st Phase Checklist

You might also like

NRP Departmental Safety Audit Checklist

Contractor Spot Check Checklist

Lidl Health and Safety File Checklist

Carpentry BICs and Kitchen 1st Phase Checklist