Template

Power Factor Correction Wall Mount Audit Checklist

by James Huf, from the Community

10+

Use this audit template to assess power factor correction wall mount units and document condition, performance, and compliance. Capture part and serial numbers, visual checks for overheating, photos before and after, and confirmation of fuse bracket installation. Log replaced contactors or fuse bases, test results, site notes, and corrective actions. Record site contact details and signatures for traceability and maintenance planning.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Power Factor Correction Audit Checklist
Use this Power Factor Correction (PFC) audit checklist to assess the condition and safety of PFC units. Record part and PRO numbers, capture photos (doors closed and open), check for overheating, and verify that copper links, contactors, and fuse bases are replaced when heat-damaged. Document replaced items with photos, add site inspection notes, confirm satisfactory results, and obtain site contact name and signature to support safe, efficient electrical performance.
by Bilal Dabboucy, from the Community
Downloads: 40+
Get
Template
Power Factor Correction Annual Service Report
This annual service report template is designed for inspecting and maintaining Power Factor Correction units across commercial and institutional facilities. Capture site and asset details, PFC ratings and controller settings, operating data, temperatures, and harmonic measurements. Perform comprehensive general checks on switchboards and internal components, and complete thermographic surveys for steps, controllers, fans, isolators, and transformers. Log current and capacitance readings per step, assess overall condition, and select standardized repair codes to plan corrective actions. Ideal for electricians and facility managers to ensure reliable performance, energy efficiency, and compliance.
by Patrick Vandeleur, from the Community
Downloads: 10+
Get
Template
Power Factor Correction Units Inspection Sheet
This inspection service sheet is for assessing power factor correction units at port facilities and other industrial sites. It guides technicians through pre-isolation checks, isolated inspections, and re-energization, including verifying alarms, recording current, voltage and VAR/VA readings, inspecting capacitors, reactors and ventilation, and confirming fan and sensing circuit operation. Capture photos of each step, document torque settings and component condition, and record as-found and as-left results with any required follow-up actions.
by Dougald Jillett, from the Community
Downloads: 10+
Get
Template
Pre-Start Site Inspection Checklist
This pre-start site inspection checklist helps construction and electrical teams plan and assess a site before work begins. It captures project details, attendees, utility distributor, transformer type and location, MSB condition, metering and NMI numbers, backup generator and ATS, and power factor correction. It guides proposed PV connection points, inverter locations, AC cable runs, and roof sections including material, pitch, condition, and asbestos checks. The form documents fall protection, temporary storage, and access needs for EWP and cranes, with photo evidence throughout. Use it to identify hazards, confirm space for isolators and switchboard modifications, and streamline approvals and installation readiness.
by Paul McNally, from the Community
Downloads: 0
Get

Power Factor Correction Audit Checklist

Use this Power Factor Correction (PFC) audit checklist to assess the condition and safety of PFC units. Record part and PRO numbers, capture photos (doors closed and open), check for overheating, and verify that copper links, contactors, and fuse bases are replaced when heat-damaged. Document replaced items with photos, add site inspection notes, confirm satisfactory results, and obtain site contact name and signature to support safe, efficient electrical performance.

by Bilal Dabboucy, from the Community

40+

Get

Template

Power Factor Correction Annual Service Report

This annual service report template is designed for inspecting and maintaining Power Factor Correction units across commercial and institutional facilities. Capture site and asset details, PFC ratings and controller settings, operating data, temperatures, and harmonic measurements. Perform comprehensive general checks on switchboards and internal components, and complete thermographic surveys for steps, controllers, fans, isolators, and transformers. Log current and capacitance readings per step, assess overall condition, and select standardized repair codes to plan corrective actions. Ideal for electricians and facility managers to ensure reliable performance, energy efficiency, and compliance.

by Patrick Vandeleur, from the Community

10+

Get

Template

Power Factor Correction Units Inspection Sheet

This inspection service sheet is for assessing power factor correction units at port facilities and other industrial sites. It guides technicians through pre-isolation checks, isolated inspections, and re-energization, including verifying alarms, recording current, voltage and VAR/VA readings, inspecting capacitors, reactors and ventilation, and confirming fan and sensing circuit operation. Capture photos of each step, document torque settings and component condition, and record as-found and as-left results with any required follow-up actions.

by Dougald Jillett, from the Community

10+

Get

Template

Pre-Start Site Inspection Checklist

This pre-start site inspection checklist helps construction and electrical teams plan and assess a site before work begins. It captures project details, attendees, utility distributor, transformer type and location, MSB condition, metering and NMI numbers, backup generator and ATS, and power factor correction. It guides proposed PV connection points, inverter locations, AC cable runs, and roof sections including material, pitch, condition, and asbestos checks. The form documents fall protection, temporary storage, and access needs for EWP and cranes, with photo evidence throughout. Use it to identify hazards, confirm space for isolators and switchboard modifications, and streamline approvals and installation readiness.

by Paul McNally, from the Community

Get

Power Factor Correction Wall Mount Audit Checklist

About author

You might also like

Power Factor Correction Audit Checklist

Power Factor Correction Annual Service Report

Power Factor Correction Units Inspection Sheet

Pre-Start Site Inspection Checklist

You might also like

Power Factor Correction Audit Checklist

Power Factor Correction Annual Service Report

Power Factor Correction Units Inspection Sheet

Pre-Start Site Inspection Checklist