Template

MGN Maintenance Audit - Mains or Service Stoppage

by Karen Kennan, from the Community

This gas maintenance audit guides crews through safe work before, during, and after mains or service stoppages. It covers permits, JSEA and SWMS checks, DBYD and asset locating, excavation support, PPE, confined space and respiratory protection, environmental controls, electrical testing at meters, asbestos and coating removal, meter isolation and disconnection, venturi water removal, regulator checks, leak tests, purging, and relight. Includes sign off for auditor and crew leader.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
MGN HSE Maintenance Audit Checklist
This HSE maintenance audit checklist supports gas utility field crews and contractors in verifying compliance before and during work. It covers life support customer checks, current training and authorisations, SWMS and JSEA risk assessments, required permits, and traffic and pedestrian management. Items include PPE, excavation support and monitoring, DBYD 5Ps asset location, confined space entry and rescue readiness, respiratory protection, site security, environmental controls, hazardous substances, ignition sources, electrical safety checks on gas meters, and emergency preparedness.
by Karen Kennan, from the Community
Downloads: 0
Get
Template
MGN Maintenance Audit - Mains Tie-In
This MGN Maintenance Audit for Mains Tie-In is a comprehensive checklist for gas distribution maintenance and construction crews. It covers pre-start requirements, permits, and risk assessments; traffic and excavation controls; environmental and hazardous substances management; confined space and respiratory protection; electrical safety checks for meters and equipment; asset locating using DBYD; low and medium pressure stopping-off with bagtubes and Wask 312; Williamson Short Stop procedures; polyethylene squeeze-off; flaring and purging to 100% gas in air; electrofusion, butt fusion, saddle and socket fusion practices; corrosion protection with Denso wrapping and heat shrink sleeves; spark testing; commissioning, pressure testing, leak testing, and final sign-off for auditors and crew leaders.
by Karen Kennan, from the Community
Downloads: 0
Get
Template
MGN Maintenance Audit: Service Cut Off and Disconnection
Comprehensive audit checklist for Multinet Gas service cut off and disconnection work. Covers pre-start checks, life support customers, permits, SWMS and risk assessments, PPE, excavation controls, traffic management, environmental impacts, and emergency readiness. Includes locate and prove assets steps, confined space and respiratory protection, electrical tests, shut down and depressurization, leak checks, socket fusion and electrofusion procedures, squeeze off, corrosion protection, purging, reinstatement, documentation, and sign off.
by Karen Kennan, from the Community
Downloads: 0
Get
Template
MGN Maintenance Audit Pin Pointing Gas Escapes
Use this comprehensive MGN maintenance audit to systematically locate and pin point gas escapes across mains, services, and meters. The checklist covers pre-start checks, SWMS and permits, PPE, excavation safety, confined space and respiratory protection, electrical testing, and environmental controls. It guides bar hole surveys, percussion bar and matting use, leak classification and response, and procedures for sealed pavements, conduits, and around trees. Includes documentation requirements, emergency planning, and final sign off to verify repairs and site safety in line with SWP and DBYD standards.
by Karen Kennan, from the Community
Downloads: 0
Get

MGN HSE Maintenance Audit Checklist

This HSE maintenance audit checklist supports gas utility field crews and contractors in verifying compliance before and during work. It covers life support customer checks, current training and authorisations, SWMS and JSEA risk assessments, required permits, and traffic and pedestrian management. Items include PPE, excavation support and monitoring, DBYD 5Ps asset location, confined space entry and rescue readiness, respiratory protection, site security, environmental controls, hazardous substances, ignition sources, electrical safety checks on gas meters, and emergency preparedness.

by Karen Kennan, from the Community

Get

Template

MGN Maintenance Audit - Mains Tie-In

This MGN Maintenance Audit for Mains Tie-In is a comprehensive checklist for gas distribution maintenance and construction crews. It covers pre-start requirements, permits, and risk assessments; traffic and excavation controls; environmental and hazardous substances management; confined space and respiratory protection; electrical safety checks for meters and equipment; asset locating using DBYD; low and medium pressure stopping-off with bagtubes and Wask 312; Williamson Short Stop procedures; polyethylene squeeze-off; flaring and purging to 100% gas in air; electrofusion, butt fusion, saddle and socket fusion practices; corrosion protection with Denso wrapping and heat shrink sleeves; spark testing; commissioning, pressure testing, leak testing, and final sign-off for auditors and crew leaders.

by Karen Kennan, from the Community

Get

Template

MGN Maintenance Audit: Service Cut Off and Disconnection

Comprehensive audit checklist for Multinet Gas service cut off and disconnection work. Covers pre-start checks, life support customers, permits, SWMS and risk assessments, PPE, excavation controls, traffic management, environmental impacts, and emergency readiness. Includes locate and prove assets steps, confined space and respiratory protection, electrical tests, shut down and depressurization, leak checks, socket fusion and electrofusion procedures, squeeze off, corrosion protection, purging, reinstatement, documentation, and sign off.

by Karen Kennan, from the Community

Get

Template

MGN Maintenance Audit Pin Pointing Gas Escapes

Use this comprehensive MGN maintenance audit to systematically locate and pin point gas escapes across mains, services, and meters. The checklist covers pre-start checks, SWMS and permits, PPE, excavation safety, confined space and respiratory protection, electrical testing, and environmental controls. It guides bar hole surveys, percussion bar and matting use, leak classification and response, and procedures for sealed pavements, conduits, and around trees. Includes documentation requirements, emergency planning, and final sign off to verify repairs and site safety in line with SWP and DBYD standards.

by Karen Kennan, from the Community

Get

MGN Maintenance Audit - Mains or Service Stoppage

About author

You might also like

MGN HSE Maintenance Audit Checklist

MGN Maintenance Audit - Mains Tie-In

MGN Maintenance Audit: Service Cut Off and Disconnection

MGN Maintenance Audit Pin Pointing Gas Escapes

You might also like

MGN HSE Maintenance Audit Checklist

MGN Maintenance Audit - Mains Tie-In

MGN Maintenance Audit: Service Cut Off and Disconnection

MGN Maintenance Audit Pin Pointing Gas Escapes