Template

Flowback and Frac Iron Shop Facility Audit

by Kenneth Phillips, from the Community

Use this facility audit checklist to assess fabrication, production, flowback, and frac iron shops for HSE compliance. Verify OSHA 300 log posting, first aid kits, evacuation plans, fire extinguishers, eyewash and emergency showers, electrical panel labeling and access, tool storage and guarding, compressed gas cylinder security, welding area housekeeping, LOTO on cranes, forklift parking and extinguishers, warehouse shelving and parts storage, and yard fence line organization. Ideal for oil and gas service facilities to standardize inspections and improve safety readiness.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
LEG Service Center Facility Audit Checklist
Conduct a thorough facility audit for service centers with this checklist covering office areas, shop floors, grounds and storage rooms. Verify OSHA posting and training, evacuation diagrams, exits and lighting, fire extinguishers and inspections, first aid and eyewash, PPE signage and SDS access. Check welding shields and leads, overhead cranes and inspections, forklifts, electrical panels and cords, tool condition, and lockout tagout. Review oil and fluid storage, labeling, secondary containment, housekeeping, waste pickups, muster point signage, parking and site security, then record findings and follow-up.
by Kenneth Phillips, from the Community
Downloads: 10+
Get
Template
SWACO Facility Audit Checklist
Use this SWACO facility audit to assess transfer station operations and facility conditions. The checklist covers general housekeeping, signage, lighting, ventilation, spill control, and records retention. Verify emergency response readiness including extinguishers, evacuation plans, eyewash and showers, and flammable storage. Review basic health and safety, PPE, sanitation, equipment guarding, and maintenance. Check electrical safety, machine and tool standards, ladder and forklift controls, and confined space compliance. Audit logs and documentation, including OSHA 300 and 301, equipment inspections, and DOT incident reports. Confirm vehicle labeling, driver spill kits, and emergency manuals. Capture photos and sign off to complete the audit.
by Chris Browning, from the Community
Downloads: 10+
Get
Template
Frac HSE Checklist
This FRAC HSE checklist helps oil and gas teams conduct comprehensive safety checks during hydraulic fracturing operations. It covers PPE and fall protection, lighting, guarding of pinch points and rotating equipment, pressure transducers and pump shutdown tests, pump numbering and communication, fire extinguishers, flow line restraints, high-pressure zone controls, container labeling, spark arrestors, LOTO, SDS access, first aid and trained responders, safety showers and eyewash, signage, grounding and containment for FRAC tanks, chock blocks, emergency assembly details and hospital directions, fueling grounding, hose condition and restraints, spill mitigation and soda ash for acid, pre-job JSA and ground guides, equipment spacing and egress, cellar covers, treating line configuration and double valve bleed-off, line capacity and equalization, engine shutdowns, missile certification, hose support, tag lines, proper tools, equipment cleanliness and maintenance, hand tool condition, suction and supercharge hose ratings and staged connections, hose covers for acid or flammables, rigging hardware condition and ratings, trapped pressure checks, end device condition, and notes for PRVs, hydraulic FRAC valves, ball launch systems, and wireline operations.
by Will Scott, from the Community
Downloads: 0
Get
Template
Warehouse, Shop and Yard Safety Audit Checklist
This Warehouse, Shop and Yard Safety Audit checklist helps teams assess critical safety controls across facilities and yard areas. Topics include OSHA poster visibility, general housekeeping, unobstructed doorways, and PPE such as safety glasses, gloves, face protection, foot and hearing protection. It covers electrical safety including GFCI use, panel clearance and labeling, plus fire safety like marked exits and inspected extinguishers. The checklist reviews tool guarding, compressed gas storage, flammable liquids cabinets, safe material stacking, SDS access and eyewash availability. Forklift daily inspections and seatbelt use are included, with space for notes and sign off.
by Mike Stewart, from the Community
Downloads: 0
Get

Flowback and Frac Iron Shop Facility Audit

About author

You might also like

LEG Service Center Facility Audit Checklist

SWACO Facility Audit Checklist

Frac HSE Checklist

Warehouse, Shop and Yard Safety Audit Checklist

You might also like

LEG Service Center Facility Audit Checklist

SWACO Facility Audit Checklist

Frac HSE Checklist

Warehouse, Shop and Yard Safety Audit Checklist