Template

Offshore Lifesaving Equipment Audit Checklist

by Al Wajba, from the Community

This offshore lifesaving equipment audit checklist helps MODU and rig teams verify readiness and compliance of survival craft and gear. It covers TEMPSC capacity and distribution, muster lighting, access routes, markings, bilge condition, fire protection, engine and fuel checks, batteries, belts and hoses, flares, first aid kits, explosion proof flashlights, survival kits, sprinkler and launching systems, davits and limit switches, lubrication, safety lines, training, and communications including fixed VHF, GMDSS, and EPIRB. Liferaft requirements address capacity, distribution, inspection dates, accessibility, release mechanisms, corrosion, cradles, and station signage. Sections also include lifebuoys, flotation aids, escape ladders, line throwing guns, emergency spotlights, and administration of load test certificates.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions .

Template
WINS OVIQ Offshore Vessel Inspection Checklist
A standardized Offshore Vessel Inspection Questionnaire supporting offshore operations. Sections cover crew and contractor management, navigation and bridge procedures, safety and security, permit to work, lifting equipment, lifesaving appliances, fire safety, pollution prevention and MARPOL compliance, structural condition, communications and GMDSS, propulsion and machinery, dynamic positioning operations, and task specific modules for anchor handling, towing and pushing, supply boat operations, emergency response and rescue vessels, ROV and diving, oil recovery, and seismic and geotechnical survey. Use this checklist to verify compliance with OCIMF guidelines and industry best practice across offshore fleet operations.
by Devi Samosir, from the Community
Downloads: 30+
Get
Template
Annual Vessel Inspection Checklist
This annual vessel inspection checklist helps marine teams verify seaworthiness and compliance. It covers policy and procedures, crew organization and training, PPE, lifesaving equipment (first aid, extinguishers, flares, EPIRB, AED), navigational equipment (radar, VHF, compass, charts, GPS), electrical systems, engine and mechanical components (bilge pumps, fuel systems, oils, suppression), loose gear, and overall vessel and hull condition. Use it to document findings, capture photos, log station assets, and record recommendations for corrective actions. Ideal for search and rescue units and maritime operators conducting scheduled audits.
by Aaron Frost, from the Community
Downloads: 30+
Get
Template
Offshore Hygiene Inspection Form
This offshore hygiene inspection form helps teams on oil and gas platforms assess food handling, storage, preparation temperatures, and protection practices. It covers leftovers control, utensil and equipment sanitation, personnel health and hygiene, and required training. General offshore housekeeping is included, with checks for bunks, corridors, pest control, and chemical use. Galley and dining area standards and linen and restroom cleanliness are also verified. Use this bilingual English and Thai checklist to standardize audits, maintain compliance, and protect crews during offshore operations.
by Carlo Reyes, from the Community
Downloads: 20+
Get
Template
Workshop Health and Safety Audit Checklist
This workshop health and safety audit checklist helps teams assess site offices and welfare, fire emergency arrangements, escape routes and lighting, firefighting equipment, and clearly defined traffic and pedestrian routes. It covers equipment safety and guarding, housekeeping, lighting and ventilation, waste and hazardous materials management, and chemical storage with compliant signage. Verify PPE requirements and storage, trained first aiders, first aid kits and eyewash stations. Check electrical safety for portable and fixed equipment, welding safety controls, compressed gas handling, and working practices. Inspect mobile and fixed plant, LOLER lifting equipment, compressors, and hand and power tools.
by Matt Chamberlain, from the Community
Downloads: 0
Get

Offshore Lifesaving Equipment Audit Checklist

About author

You might also like

WINS OVIQ Offshore Vessel Inspection Checklist

Annual Vessel Inspection Checklist

Offshore Hygiene Inspection Form

Workshop Health and Safety Audit Checklist

You might also like

WINS OVIQ Offshore Vessel Inspection Checklist

Annual Vessel Inspection Checklist

Offshore Hygiene Inspection Form

Workshop Health and Safety Audit Checklist