Template

ASL Monthly Biomass PPM V2.1 Checklist

by Gareth Bryant, from the Community

10+

Use this monthly biomass planned preventive maintenance checklist to inspect and service biomass boiler systems. Sections cover boiler internals, ash bins and extraction, soot cleaning, flue fan, heating pumps, fuel augers and sensors, combustion controls, and the main control panel. Record leaks, pressures, oil levels, and heat meter readings, attach photos, and log issues. Capture engineer and manager sign off to maintain compliance and uptime.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions .

Template
ASL Monthly Biomass PPM Checklist
This monthly planned preventive maintenance checklist guides engineers through biomass boiler servicing, including heat exchanger and furnace checks, ash bins and extraction augers, soot blowing and compressor, flue fan belts and sensors, primary and secondary heating pumps, fuel silo and transport augers, proximity sensors, fire dampers, dosing valves and controls. Verify combustion air fans and actuators, lambda probe readings, control panel isolators, overloads, PLC and touchscreen status. Inspect plant pipework, pressurisation, safety valves, gearboxes, hydraulics, ventilation, cleanliness, heat meter and remote outstation. Record issues and signatures to maintain efficiency, safety and compliance.
by Gareth Bryant, from the Community
Downloads: 10+
Get
Template
ASL Monthly Biomass PPM Checklist V2.2
This monthly planned preventative maintenance checklist supports biomass boiler operations. It guides engineers through boiler inspections, including heat exchanger, furnace, and firebed checks; ash bins and ash extraction augers; soot cleaning systems and compressors; flue fan, belts, manometer, and temperature probes; primary and secondary heating pumps and inverters; fuel store and transport augers, bearings, sensors, burn-back protection, dosing valve, and associated gearboxes; combustion air fans, actuators, and Lambda probe readings; and control panel integrity, cooling fans, overloads, touchscreen, PLC, and settings. General plant room checks cover pipework, leaks, pressurisation, safety valves, lighting, lubrication, hydraulic oil, housekeeping, and ventilation. The template also captures heat meter status and readings, photos, issue descriptions, and engineer and client signatures, aligning with manufacturer guidance and best practice for compliance.
by Benjamin Phillpott, from the Community
Downloads: 0
Get
Template
Glangwili Biomass Monthly PPM V2.1
A structured monthly planned preventive maintenance checklist for the Glangwili biomass boiler plant. Tasks cover boiler and heat exchanger inspection, furnace condition, ash bins and extraction system, soot cleaning, flue fan and belts, pumps and leaks, fuel feed conveyors, bearings and chains, fire damper and sensors, combustion air fans and actuators, lambda probe checks, control panel safety and ventilation, inverters and lights, and pipework and steam side checks. Includes housekeeping for the boiler room and final pressure verification before leaving. Fields provided for photos, site manager and engineer sign off.
by Gareth Bryant, from the Community
Downloads: 0
Get
Template
Biomass Boiler Service Checklist Annual PPM
This biomass boiler service checklist supports annual planned preventive maintenance to keep systems safe, efficient, and compliant. It covers inspection and servicing of the heat exchanger, furnace, firebed, ash bins and extraction augers, soot cleaning systems, flue fan and manometer, primary and secondary heating pumps, and the fuel delivery system including augers, sensors, motors, gearboxes, and safety devices. Technicians verify combustion settings, fans, air actuators, and the Lambda probe, then check the control panel isolator, cooling fans, ventilation, overloads, touchscreen, and indicators. General plant room checks include pipework condition, leaks, pressurisation, pressure vessel settings, safety valves, oil levels, cleanliness, ventilation grills, and housekeeping. The template provides sections for photo evidence and customer sign off.
by ADAM WARD, from the Community
Downloads: 0
Get

ASL Monthly Biomass PPM Checklist

This monthly planned preventive maintenance checklist guides engineers through biomass boiler servicing, including heat exchanger and furnace checks, ash bins and extraction augers, soot blowing and compressor, flue fan belts and sensors, primary and secondary heating pumps, fuel silo and transport augers, proximity sensors, fire dampers, dosing valves and controls. Verify combustion air fans and actuators, lambda probe readings, control panel isolators, overloads, PLC and touchscreen status. Inspect plant pipework, pressurisation, safety valves, gearboxes, hydraulics, ventilation, cleanliness, heat meter and remote outstation. Record issues and signatures to maintain efficiency, safety and compliance.

by Gareth Bryant, from the Community

10+

Get

Template

ASL Monthly Biomass PPM Checklist V2.2

This monthly planned preventative maintenance checklist supports biomass boiler operations. It guides engineers through boiler inspections, including heat exchanger, furnace, and firebed checks; ash bins and ash extraction augers; soot cleaning systems and compressors; flue fan, belts, manometer, and temperature probes; primary and secondary heating pumps and inverters; fuel store and transport augers, bearings, sensors, burn-back protection, dosing valve, and associated gearboxes; combustion air fans, actuators, and Lambda probe readings; and control panel integrity, cooling fans, overloads, touchscreen, PLC, and settings. General plant room checks cover pipework, leaks, pressurisation, safety valves, lighting, lubrication, hydraulic oil, housekeeping, and ventilation. The template also captures heat meter status and readings, photos, issue descriptions, and engineer and client signatures, aligning with manufacturer guidance and best practice for compliance.

by Benjamin Phillpott, from the Community

Get

Template

Glangwili Biomass Monthly PPM V2.1

A structured monthly planned preventive maintenance checklist for the Glangwili biomass boiler plant. Tasks cover boiler and heat exchanger inspection, furnace condition, ash bins and extraction system, soot cleaning, flue fan and belts, pumps and leaks, fuel feed conveyors, bearings and chains, fire damper and sensors, combustion air fans and actuators, lambda probe checks, control panel safety and ventilation, inverters and lights, and pipework and steam side checks. Includes housekeeping for the boiler room and final pressure verification before leaving. Fields provided for photos, site manager and engineer sign off.

by Gareth Bryant, from the Community

Get

Template

Biomass Boiler Service Checklist Annual PPM

This biomass boiler service checklist supports annual planned preventive maintenance to keep systems safe, efficient, and compliant. It covers inspection and servicing of the heat exchanger, furnace, firebed, ash bins and extraction augers, soot cleaning systems, flue fan and manometer, primary and secondary heating pumps, and the fuel delivery system including augers, sensors, motors, gearboxes, and safety devices. Technicians verify combustion settings, fans, air actuators, and the Lambda probe, then check the control panel isolator, cooling fans, ventilation, overloads, touchscreen, and indicators. General plant room checks include pipework condition, leaks, pressurisation, pressure vessel settings, safety valves, oil levels, cleanliness, ventilation grills, and housekeeping. The template provides sections for photo evidence and customer sign off.

by ADAM WARD, from the Community

Get

ASL Monthly Biomass PPM V2.1 Checklist

About author

You might also like

ASL Monthly Biomass PPM Checklist

ASL Monthly Biomass PPM Checklist V2.2

Glangwili Biomass Monthly PPM V2.1

Biomass Boiler Service Checklist Annual PPM

You might also like

ASL Monthly Biomass PPM Checklist

ASL Monthly Biomass PPM Checklist V2.2

Glangwili Biomass Monthly PPM V2.1

Biomass Boiler Service Checklist Annual PPM