Template

WHEATLEY Dynamic Risk Assessment

by Elcom Networks, from the Community

60+

This WHEATLEY Dynamic Risk Assessment template helps engineers and site teams verify critical safety steps before starting work. It guides users to confirm site induction, review RAMS, check PPE and tools, understand emergency procedures, identify stopcocks, and review isolation training. It includes asbestos checks, cable and service detection, endoscope verification for voids, required photos, and supervisor sign-off to ensure drilling and cabling are completed safely.

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With SafetyCulture you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the SafetyCulture community. SafetyCulture has re-published this content and where possible, has credited the original author. SafetyCulture has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with SafetyCulture’s Terms and Conditions.

Template
Dynamic Site Safety Risk Assessment Checklist
Perform a dynamic, on-site risk assessment to keep construction sites safe. This checklist covers site access obstructions and warnings, visible building defects, sign in and ID verification, notifying the responsible person, reviewing site documentation such as asbestos, fire risk assessment and water risk assessment, required PPE, and sign off. Document hazards and controls in real time to meet site requirements and best practices.
by Dan Poole, from the Community
Downloads: 10+
Get
Template
Authority to Work and Dynamic Risk Assessment
This Authority to Work and Dynamic Risk Assessment checklist helps contractors and site managers confirm readiness before starting work. It covers site induction, approvals, competence checks, tools and PPE verification, and whether a high risk permit is required. The form prompts review of current SOPs and risk assessments, SDS availability, tool inspections, calibration and certification status, safe access and lighting, environmental conditions, hazard barriers, emergency procedures, first aid and eyewash access, incident reporting, and PPE selection and maintenance. It includes a comprehensive hazard list and suggested risk controls such as LOTO, guarding, safe access equipment, lifting aids, ventilation, task lighting, housekeeping, and specialist training. Acceptance and signatures capture contractor confirmation and engineer approval.
by Sasha Shepherd, from the Community
Downloads: 0
Get
Template
Dynamic Risk Assessment DRA Checklist
This Dynamic Risk Assessment DRA template helps facilities and property teams confirm competence, training, permits, and communication before starting work. It guides checks on tools and equipment, access and environmental conditions, PPE, and emergency arrangements. Use it to identify who may be at risk, review common hazards such as electrical energy, asbestos, working at height, and select appropriate controls including lockout tagout, permits to work, ventilation, and housekeeping.
by Sasha Shepherd, from the Community
Downloads: 0
Get
Template
Risk Assessment Template for Installers
Use this risk assessment template to evaluate hazards on installation sites before starting work. Designed for lead installers and teams, it guides dynamic checks for slips and trips, manual handling, work at height, asbestos awareness, PPE, electrical isolation, and site-specific risks. Record controls, note outstanding issues, and confirm when work can proceed safely. Includes sections for equipment checks, training verification, weather and ground conditions, and signatures from all personnel on site.
by Midori Harako, from the Community
Downloads: 0
Get

Dynamic Site Safety Risk Assessment Checklist

Perform a dynamic, on-site risk assessment to keep construction sites safe. This checklist covers site access obstructions and warnings, visible building defects, sign in and ID verification, notifying the responsible person, reviewing site documentation such as asbestos, fire risk assessment and water risk assessment, required PPE, and sign off. Document hazards and controls in real time to meet site requirements and best practices.

by Dan Poole, from the Community

10+

Get

Template

Authority to Work and Dynamic Risk Assessment

This Authority to Work and Dynamic Risk Assessment checklist helps contractors and site managers confirm readiness before starting work. It covers site induction, approvals, competence checks, tools and PPE verification, and whether a high risk permit is required. The form prompts review of current SOPs and risk assessments, SDS availability, tool inspections, calibration and certification status, safe access and lighting, environmental conditions, hazard barriers, emergency procedures, first aid and eyewash access, incident reporting, and PPE selection and maintenance. It includes a comprehensive hazard list and suggested risk controls such as LOTO, guarding, safe access equipment, lifting aids, ventilation, task lighting, housekeeping, and specialist training. Acceptance and signatures capture contractor confirmation and engineer approval.

by Sasha Shepherd, from the Community

Get

Template

Dynamic Risk Assessment DRA Checklist

This Dynamic Risk Assessment DRA template helps facilities and property teams confirm competence, training, permits, and communication before starting work. It guides checks on tools and equipment, access and environmental conditions, PPE, and emergency arrangements. Use it to identify who may be at risk, review common hazards such as electrical energy, asbestos, working at height, and select appropriate controls including lockout tagout, permits to work, ventilation, and housekeeping.

by Sasha Shepherd, from the Community

Get

Template

Risk Assessment Template for Installers

Use this risk assessment template to evaluate hazards on installation sites before starting work. Designed for lead installers and teams, it guides dynamic checks for slips and trips, manual handling, work at height, asbestos awareness, PPE, electrical isolation, and site-specific risks. Record controls, note outstanding issues, and confirm when work can proceed safely. Includes sections for equipment checks, training verification, weather and ground conditions, and signatures from all personnel on site.

by Midori Harako, from the Community

Get

WHEATLEY Dynamic Risk Assessment

About author

You might also like

Dynamic Site Safety Risk Assessment Checklist

Authority to Work and Dynamic Risk Assessment

Dynamic Risk Assessment DRA Checklist

Risk Assessment Template for Installers

You might also like

Dynamic Site Safety Risk Assessment Checklist

Authority to Work and Dynamic Risk Assessment

Dynamic Risk Assessment DRA Checklist

Risk Assessment Template for Installers